Entrust CD800 User manual

Quick Install Guide
CD800™ Card Printer
October 2020
527662-001, Rev G

2
CD800 Card Printer
1. Select a Location for the Printer
• Install the printer in a location that is clean and well
ventilated, free of vibration or shock.
• For venting and clearance, choose an area that’s large
enough for your printer conguration based on its
options. Refer to the site requirements in the printer’s
Installation and Administrator’s Guide.
• Do not install the printer in direct sunlight.
• Install the system in a secure location.
• Install the system in a location that has access to an
AC outlet and a network port (if you are using a network
connection).
• If you also are installing a CLM laminator with the printer,
refer to the CD Series Printers CLM Laminator Quick
Install and Upgrade Guide, shipped in the laminator
carton.
Refer to the printer’s Installation and Administrator’s Guide,
found on the Owner’s Library CD, for detailed installation
instructions.
The latest rmware and user documentation for your
CD800 printer is available for download at
www.entrustdatacard.com.

3
Quick Install Guide
2. Set Up the Printer
a. Remove the printer from its shipping carton.
Refer to the following illustration if the printer has the
optional multi-hopper.

4
CD800 Card Printer
c. If the printer has the optional multi-hopper, unlock the
printer and open the printer supplies access door and
the multi-hopper cover.
Remove the packing material inserted behind the multi-
hopper and inside the cover.
b. Unlock the printer (if necessary) and open the printer
cover.

5
Quick Install Guide
b. Load the print ribbon onto the cartridge.
3. Load Supplies
Supplies are ordered separately.
a. Remove the print ribbon cartridge.

6
CD800 Card Printer
d. Install the print ribbon cartridge in the printer.
e. Close the printer cover. Press down on the cover ridges
to make sure that the cover latches completely on both
sides.
c. Load the cleaning sleeve onto the ribbon cartridge.

7
Quick Install Guide
f. Load cards in the hopper.
Multi-Hopper
g. Close the printer doors and lock the printer, if necessary.
Single Hopper

8
CD800 Card Printer
4. Plug In and Power On the Printer
a. Connect the printer power cord to the printer and to the
power supply.
b. Plug the power supply cord into the power outlet.
c. Press the power button on the front panel to power on
the printer. Wait until the system has powered on and
Ready displays on the LCD panel.

9
Quick Install Guide
5. Retrieve the Network IPv4 Address
Use the front panel to nd the printer IP address. You need
to enter the printer IP address if you install the Card Printer
Driver and to access Printer Manager from a browser
window.
6. Install the Card Printer Driver (Optional)
If you plan to use the XPS Card Printer Driver, refer to
the XPS Card Printer Driver User’s Guide for installation
instructions using either a USB or a network connection.
If your site plans to use IPv6 addressing, refer to
the printer’s Installation and Administrator’s Guide
for information about enabling IPv6.
2X

10
CD800 Card Printer
7. Print a Test Card (Optional)
Use the printer’s LCD panel to print a test card:
2
4
5
3
6
1
7

11
Quick Install Guide
8. Next Steps
• If you use the XPS Card Printer Driver, refer to the XPS
Card Printer Driver User’s Guide for setup instructions.
• Contact your system administrator to set up the rest of
the system.
• Set up security, including network authorization to the
printer.
• Refer to the card printer’s Installation and
Administrator’s Guide for detailed installation
instructions.
Please complete a brief survey about your product installation
experience at:
https://www.datacard.com/datacard-product-installation-report
WARNING: This product contains chemicals, including lead, known to the State
of California to cause cancer, and birth defects or other reproducve harm.
Wash hands aer handling.
WARNING: This product can expose you to chemicals including
Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to
cause cancer, and Di(2-ethylhexyl)phthalate (DEHP) and Butyl benzyl phthalate
(BBP), which are known to the State of California to cause birth defects or other
reproducve harm. For more informaon, go to www.P65Warnings.ca.gov and
www.datacard.com/califpropwarning.

1187 Park Place
Minneapolis, Minnesota 55379
952.933.1223 • 952.933.7971 Fax
www.entrustdatacard.com
Entrust, Sigma and the hexagon design are trademarks, registered trademarks and/
or service marks of the Entrust Corporaon in the United States and other countries.
Datacard is a registered trademark and service mark of Entrust Corporaon in the
United States and other countries. All other trademarks are the property of their
respecve owners.
© 2015 - 2020. The design and informaon contained in these materials is protected