Entrust CE875 User manual

Quick Install Guide
CE875™ Retransfer Card
Printer
December 2020
527762-001EN, Rev H

Attention: CE870™ System Users
If you are converng your CE870 system to a CE875 Instant
Issuance System, refer to the CE870 to CE875 System Upgrade
Installaon Instrucons located in the Upgrade Kit box.
WARNING: This product contains chemicals, including lead, known to the State
of California to cause cancer, and birth defects or other reproducve harm.
Wash hands aer handling.
WARNING: This product can expose you to chemicals including
Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to
cause cancer, and Di(2-ethylhexyl)phthalate (DEHP) and Butyl benzyl phthalate
(BBP), which are known to the State of California to cause birth defects or other
reproducve harm. For more informaon, go to www.P65Warnings.ca.gov and
www.datacard.com/califpropwarning.

1
527762-001_H 1
Quick Install Guide
Unpack the Printer
Li printer from
the sides only
For detailed installaon instrucons, refer to the CR825 and CE875
Instant Issuance System Installaon and Administrator’s Guide.
OR

2
2 527762-001_H
CE875 Instant Issuance System
Unpack the Embosser

3
527762-001_H 3
Quick Install Guide
Remove Shipping Items From the Embosser

4
a
b
4 527762-001_H
CE875 Instant Issuance System
Secure the Embosser

5
527762-001_H 5
Quick Install Guide
Install the Optional Multi-Hopper
1. Unpack the mul-hopper

a
b
6 527762-001_H
CE875 Instant Issuance System
Restraining Pins
Mul-Hopper Top
Mul-Hopper
Boom
Install the Oponal Mul-Hopper (cont.)
2. Prepare the mul-hopper
Save the restraining pins aer removing them from the mul-
hopper. They are required if you need to repackage and return
the mul-hopper for service.

1
2
3
1 in.
25.4 mm
527762-001_H 7
Quick Install Guide
Mul-Hopper
Back
Mul-Hopper
Aachment Hooks
Hopper Aachment
Slots
3. Assemble the mul-hopper printer
Install the Oponal Mul-Hopper (cont.)

6
a
b
1
2
8 527762-001_H
CE875 Instant Issuance System
Assemble the System
Unlock
Lock
Connect the interconnect cable.
Interconnect
Cable

7
a
c
b
527762-001_H 9
Quick Install Guide
Load the Indent Ribbon
Click
Click

8
a
b
10 527762-001_H
CE875 Instant Issuance System
Load the Topping Foil
Click
Click

9
527762-001_H 11
Quick Install Guide
Install the Embosser Cartridges

10
a
b
12 527762-001_H
CE875 Instant Issuance System
Connect the Power Cords

11
a
b
527762-001_H 13
Quick Install Guide
Power On the System
The printer may or may not require activation.
• If Print job queue is deacvated displays on the LCD panel,
connue with “Acvate the System” on page 14.
• If Ready displays on the LCD panel, connue with “Clean
the Printer” on page 16.

12
a
c
b
14 527762-001_H
CE875 Instant Issuance System
Activate the System
Call 1-800-328-3996 for the acvaon code.
Embosser
Serial Number
Printer Serial
Number

1
2
3
4
5
d6
7
8
9
527762-001_H 15
Quick Install Guide
Press unl correct digit displays
OR
Repeat 6 & 7 for each digit
Acvate the System (cont.)

13
a
b
c
16 527762-001_H
CE875 Instant Issuance System
Clean the Printer
Connue with “Start the Cleaning Cycle” on page 18.
Remove the isopropanol cleaning card from the ink ribbon package.
Connue with:
“Single-Hopper Printer”
“Mul-Hopper Printer” on page 17
Single-Hopper Printer
Isopropanol
Cleaning Card
Remove the cleaning card from its package.
Isopropanol
Cleaning Card
Load the cleaning card in the input hopper.
If the cleaning card appears
bowed, insert it as shown.
Card With Bow
Card Without Bow

a
b
c
527762-001_H 17
Quick Install Guide
Mul-Hopper Printer
Isopropanol
Cleaning Card
Excepon Slide
Connue with “Start the Cleaning Cycle” on page 18.
Remove the cleaning card from its package.
1. Pull out the mul-hopper excepon slide and insert the
cleaning card.
2. Push in the excepon slide.
If the cleaning card appears
bowed, insert it as shown.
Card With Bow
Card Without Bow
Clean the Printer (cont.)

1
2
3
4
5
6
7
18 527762-001_H
CE875 Instant Issuance System
Start the Cleaning Cycle
Clean the Printer (cont.)