Envirovent heatSava User manual

heatSAVA
USER GUIDE FOR RESIDENT

heatSava
01423 810 810
SHOULD YOU ENCOUNTER ANY PROBLEMS
INSTALLING THIS UNIT, CALL US ON:
What is it and why is it there?
The heatSava is an intelligent through the wall
single room heat recovery unit ideal for bathrooms,
kitchens, WC’s and utility rooms achieving up to
75% efficiency.
How will it help?
It will prevent the build up of moisture, remove
steam/condensation and odours during bathing
and cooking, prevent black mould forming on the
walls, behind cupboards etc. It will also help stop
the dampness that you can get in your cupboards
and wardrobes, on your clothes and furnishings,
caused by poor ventilation. It provides continuous,
all year round ideal indoor air quality.
How do I control it?
The system operates continuously 24 hours a day at
a low rate known as ‘trickle’, to ensure your home is
ventilated at the appropriate level. You can send the
system into a higher rate called ‘boost’ in a number
of ways.
• Remote Control Versions
Press the button once to see the current status of
your unit and again to boost the unit. The boost LED
will light and the unit will go to boost for 20 minutes.
When the battery requires changing, unscrew the
switch front cover. The battery is located on the
back of the cover. Battery type - 3V Lithium, CR2032.
For further information, see the installation guide
• Pull Cord
Pull the cord once to send the system into boost
mode and twice to return the system to trickle
mode.
Remote Control Intellitrac®Technology
The heatSava has been engineered with Intellitrac®
Technology to think for itself, meaning that you
don’t need to press any buttons or light switches
to turn it on. When the heatSava senses a rise in
humidity, caused by increased moisture generation
such as through cooking or showering, the extract
and supply airflows will slowly begin to increase in
direct proportion to the increase in humidity. It will
then automatically track back down again when
humidity falls. This controls condensation quietly
and efficiently.
Remote Control
Home Ventilation System GuideHome Ventilation System Guide
heatsava
Single Room Heat Recovery System
Remote Control Button
INSTALLING THIS UNIT, CALL US ON:

FOR ADDITIONAL INFORMATION, SEE THE INSTALLATION GUIDE
Summer Mode
During warmer days, the heatSava prevents warm
air from entering the room and switches to provide
extract ventilation only. As the temperature falls it
automatically returns to heat recovery mode.
Frost Protection
The heatSava has an automatic built-in frost
protection mechanism to prevent damage to the
heat exchange cell in cold conditions.
Warranty
The EnviroVent heatSava is covered by a full 5-year
warranty. You will find the terms of the warranty in
the installation guide.
• DO NOT switch off the unit - The unit is set to
run continuously 24 hours a day, 7 days a week.
Maintenance
Ensure mains is isolated before carrying out any
cleaning or maintenance.
Cleaning can be carried out by the resident by
vacuuming the sides of the grilles.
The heatSava should ideally be cleaned around
every 6 months depending on occupancy levels,
conditions of use and where the heatSava is
located.
General maintenance should ideally take place
every 12 months and should be carried out only
by a competent trades person adhering to the
instructions in the installation guide.
Service
The unit should be serviced every 5 years by
EnviroVent, a maintenance company or other
competent person. This would include an air flow
check as well as inspection of the heat exchange
cell, all components and parts. Any worn out
components can then be exchanged. These would
then be brought back to the Harrogate factory to
be recycled.
Safety
You do not need to remove the covers from the unit,
any repair work should be carried out by a qualified
person to avoid hazard. If the supply cord is
damaged, it must be replaced by the manufacturer,
service agent or similarly qualified person.
Emergency shutdown details - Unit to be
isolated from the mains by turning it off at
the isolating switch.
Annual Running Costs
Please scan our QR code
to see the annual running
costs of this product.
Kitchen
Or visit: envirovent.com/annual-running-costs

We want to hear from you
Your feedback is important to us as we strive to improve our
products, services, and overall customer experience. Please email
us to help us serve you better: [e-mail]
For additional information,
see the installation guide.
EnviroVent Ltd
Harrogate West Business Park
Unit 1 Bardner Bank
Killinghall
Harrogate
HG3 2SP
T / 01423 810 810
E / [e-mail]
W / envirovent.com
E&OE | MKT ENV578 - V1 - 14.04.23
Due to our policy of continuous innovation
and improvement EnviroVent reserves
the right to alter products specification
and appearance without notice.
Leading Manufacturer & Supplier of
Innovative & Sustainable Ventilation Systems
USERGUIDEHEATSAVA-HS3