EOI E-lite Star SL3-L User manual

Installation Guide
Procedures of Installation
Please confirm your local voltage and related electronic
specifications are matching the device before installation.
Applicable diameter of pole for SL3-L is 1.6" to 2.6" (1.4"
optional).
5.
6.
Close the cover and secure both clips to lock.
Make sure the luminaire is installed properly and clips on both
sides are locked well.
7. Power on for test.
4
A
A-E-13
1A
A-E-13
Unit: inch (mm)
Weight: 25.4 lbs (11.5 kg)
Dimensions: 29.4" x 14.1" x 5.3"
an brand - energy saving since 1995
TM
SL3-L LED Street Light
29.4 (746)
14.1 (357.5)
5.3 (132)

Please read the wiring diagram below first and connect
the power cables to the right position. Be sure to screw
tightly to avoid disconnection.
4.
1. Release two clips on both sides of the luminaire to open the cover.
2.
3. Screw the bolts of the luminaire tightly.
5-steps mounting allows a ± 5°
vertical tilt adjustable arm holder with
an increment of 2.5° each step.
2
A
A-E-13
3A
A-E-13
*
Wiring diagram
ACL(Black)
ACN(White)
Power Supply
L N
Without photoelectric control
With photoelectric control
L
N
L1
Step down transformer
347-480 190-270
COM COM
Photoelectric Control
Li
(Black)
Lo
(Red)
N
(White)
ACL (Black)
ACN (White)
Power Supply
Photoelectric Control
Li
(Black)
Lo
(Red)
N
(White)
L N
L
N
Without photoelectric control
With photoelectric control
SL3-L
SL3-L (Caltrans)
Install the luminaire to the pole and adjust to the desired position and
angle.