Epic Office Furniture Anvil Bar Leaner User manual

Anvil Bar Leaner
Assembly Instructions

Anvil Bar Leaner
Assembly Instructions 2
myolg.online

RECOMMENDED
2-person step
• To prevent possible scratches or damage, assemble the desk upside down on a
soft surface such as a blanket, carpet or packaging.
• Attach Leg to the top assembly by using bolts, spring washer, flat washer.
• Tighten using the allen wrench.

Anvil Bar Leaner
Assembly Instructions 3
myolg.online
Loosely assembly frames with rails together.
STEP
01

Anvil Bar Leaner
Assembly Instructions 4
myolg.online
STEP
02 Fully tighten frames to the rails with provided screws.

Anvil Bar Leaner
Assembly Instructions 5
myolg.online
STEP
02 Fully tighten frames to the rails with provided screws.Fully tighten frames to the rails with provided screws.

Anvil Bar Leaner
Assembly Instructions 6
myolg.online
STEP
03 Fix desk frame to worktop, allowing for a 5mm overhang on all sides. Fully tighten with provided screws.

Anvil Bar Leaner
Assembly Instructions 7
myolg.online
Completed Using two people, carefully set the desk upright and position.