Epic Office Furniture NPM-SLEG User manual

Made in PRC
NPMSLEG
Assembly instructions
347000.1

2
|
Assembly instruction
Made in PRC
TABLE OF CONTENT
1. SAFETY AND WARNINGS
2. USAGE
3. SET UP AND INSTALLATION
4. OPERATION
5. MAINTENANCE AND DEFECTS
6. TECHNICAL DATA
7. PARTS
8. ASSEMBLY DIRECTIONS
8b. ACCESSORY ASSEMBLY DIRECTIONS
9. DECLARATION OF CONFORMITY
2. USAGE
– The electromotive, height-adjustable tables are designed for workstations in dry work environments only (0-40°C; 20-90% relative
humidity). The table height is innitely adjustable, so that it can be set to the most ergonomically suitable working level.
– They have not been designed for other purposes than those included in this manual, e.g. they are not to be used in areas of
high humidity or dampness, nor for lifting people. Any other use is at one’s own risk!
– Do not crawl, lie or move around under the table frame, and do not sit or stand on the table frame.
– CHILDREN should only use the table when supervised by adults.
– Liability: The manufacturer accepts under no circumstances warranty claims or liability claims for damages arising from improper use
or handling of the table frame other than that described in this operation manual.
3. SET UP AND INSTALLATION
When the table has been assembled (see assembly directions in CHAPTER 8) the adjustable feet are installed so that the table is level
and does not shift. Then the table is connected to the 100-240 VAC outlet and the table is ready for use.
– Make sure that no cables can get jammed.
– Place the table in a safe distance from window frames, radiators, furniture etc. so that people do not get stuck.
– Do not place any objects above 550 mm underneath the table.
– When moving the table after it has been assembled, the table top needs to be removed. The table CANNOT be lifted by the table top.
The desk need to be lowered to minimum height before moving.
1. SAFETY AND WARNINGS
This table complies with the prescribed safety regulations. Inappropriate use may cause damage to persons and table.
Please read the operation manual prior to using the table. It provides you with important information about safety, use,
installation and maintenance of the table, and thus protecting you and your children and avoiding damage on the table.
Please guard this operation manual and pass it on to any future owner!
IMPORTANT NOTES !
Prior to installation, use and
maintenance of the table frame, any
installer and any user of the table
must study this assembly and operation
manual carefully, so as to gain a complete
understanding of its contents.
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS
AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.

Assembly instruction
|
3
Made in PRC
4. OPERATION
UP/DOWN operation:
Push the buttons for operation up or down
5. MAINTENANCE AND DEFECTS
– The table does not require any maintenance by usage as described in chapter 2 in the directions for use.
– The table is only to be maintained with a damp cloth.
– In the event of the occurrence of jarring sounds during operation, STOP using the table and please contact the dealer.
6. TECHNICAL DATA
Frame, materials: Steel, powder lacquered
Weights (frame): 32 kg
Width (top): 1500/1800 mm
Depth (top): 700 mm
Height (frame): 630 - 1230 mm
V(speed): ~ 32 mm/sec., depends on load.
FMAX = Max. load: 100 kg (on frame)
Duty cycle: 10% by 50% of max. load on frame or max. 2 min. continuously
Operation: Micro switches
Voltage: 100-240 VAC | 50/60 Hz
Standby Consumption: <0,15 Watt
Above specications may vary depending on local temperature, humidity and input voltage.
7. PARTS See page 4.
8. ASSEMBLY DIRECTIONS See pages 6-8.
9. DECLARATION OF CONFORMITY
We hereby declare, under our sole responsibility that the following products:
– Sit and stand table product type NPMSLEG
is in accordance with:
– Directive 2006/42/EF of The European Parliament and of the Council of 17 May 2006 on machinery
and on changes of directive 95/16/EF
With reference to the above please be aware that:
– the sit and stand table is considered a machine and
– the sit and stand table may not be used until it has been assembled and installed according to the instructions.

4
|
Assembly instruction
Made in PRC
7. Parts
A1
Legs
A2
x2 x1
x1
x12
x6
x1
x1
x4
x2
x1
x4
x4
Driveshaft
Power cable
5*16H Screws
M6x10
Transformer
Rail
M6x35
Support - Left & right
Controller
M6x10
Cable clips
B
E
H
K
x1
Transformer bracket
M
D
G
J
x8
M6x12
O
x2
Foot
P
C
F
I
L
x2
Cable tie
N

Assembly instruction
|
5
Made in PRC
8. Assembly instructions ⁄ ⁄ Select the width of your frame
Frame width 1420 mm
Frame width 1720 mm
[127]
[127]
8. Assembly instructions
⁄⁄
Attach top beam with appropriate screws
8. Assembly instructions
⁄⁄
Mount the top bracket
Ab
Ab
Ac
Aa
Ad
Ac
Mountingbag A
x5Ab
x1Ae
x4Aa
x5Ac
x1Ad
[227][327]

6
|
Assembly instruction
Made in PRC
8. Assembly instructions
2.
A1
A2
1.
P
O
C
J
G
Ox 4
x 4
x 2
Kx 3 Kx 3
Ix 2

Assembly instruction
|
7
Made in PRC
3.
4.
D M
EN
Hx 2
Ix 2
Jx 2
x 2
F
Hx 8
B
Ae
Tighten screw
X
1= X2
X
1
X
2

8
|
Assembly instruction
Made in PRC
Components position and wiring
To ensure correct up and down operation of the desk frame it has to be tted with a table top or
applied a similar weight. Without a table top tted, the desk frame may not operate in the downward direction.
Red/Red
Important:
Only plug leads red to red
and black to black.
Black/Black