Epson KB9000 User manual

111-56-QUM-024
Rev 3.00
EPSON is a registered trademark and EPSON is a registered logomark of Seiko Epson Corporation. All other product and brand
names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all rights in these marks.
Copyright 2023 Seiko Epson Corporation.
Bump Bar –KB9000
About this Guide
This guide consists of 3 sections:
•Overview –Discusses the supported KB9000 bump bar in an Epson True
Order Kitchen Display System (KDS).
•Bump Bar Functionality –Describes how to use the bump bar.
•Appendix A –Key map for the KB9000
Overview
The KB9000 bump bar allows the operator to bump off orders and interact with the
KDS screen. It connects to the TrueOrder KDS device via USB. Part number for the
KB9000 bump bar supported:
Logic Controls KB9000A-USB
This part number is a KB9000 USB bump bar with standard default template:
Note: The bump bar is fully programmable so if you have a KB9000 with a
different template you can consult the Appendix for the key mapping. How to
program is beyond the scope of this document.

Bump Bar –KB9000
Quick User Manual
111-56-QUM-024
Rev 3.00
Bump Bar Functionality
Main Screen Operations
Bumping orders in tiles 1 to 9:
Single press of the key to will bump the order associated with that tile
number.
Bumping orders in tiles 10 to 99:
1. Press the 10 key:
2. Single press of the key to for the tens digit, followed by key
for a 0 or to for any other ones digit.
Force Bump:
Pressing followed by the tile number will force bump the order associated
with that tile. This is useful in the rare circumstance an order becomes stuck on
the Expo screen.
Viewing Off Screen Orders
To see new orders that are not visible on the main screen press: will shift to
the next page/window of orders.
Pressing will shift back to the previous page/window of orders.

Bump Bar –KB9000
Quick User Manual
111-56-QUM-024
Rev 3.00
Scroll Mode
Scroll mode allows the user to select individual items within an order for the
purpose of bumping only that item or displaying that item’s recipe or instructions.
Entering/Exiting Scroll Mode
Press to enter/exit Scroll mode. Scroll icon will appear on the KDS screen
header to indicate you are in Scroll Mode, and disappear when Scroll mode is
exited.
Selecting Tiles 1-9 in Scroll Mode
Press the tile number to to select the tile associated with the
desired order. The first item in that tile will become highlighted.
Selecting Tiles 10-99 in Scroll Mode
1. Press the 10 key:
2. Single press of the key to for the tens digit, followed by key
for a 0 or to for any other ones digit.
The first item in that tile will become highlighted.

Bump Bar –KB9000
Quick User Manual
111-56-QUM-024
Rev 3.00
Selecting the next item in an order
Press to select the next item in the order. Only items within the
current order are selectable.
Selecting the previous item in an order
Press to select the previous item in the order. Only items within the current
order are selectable.
Bumping/Un-bumping an item
Press to bump the item and associated modifiers. If it is the only item in
an order or the last item to be bumped off the entire order will be bumped off and
Scroll mode exited. If there are other un-bumped items in the order then the item
will become struck-through.
Items can be un-bumped by pressing again.
Viewing Recipe/Instructions for an item
Press to bring up the recipe/instructions for the item currently
selected. It will appear in a popup window which can be removed by
pressing Summary again.

Bump Bar –KB9000
Quick User Manual
111-56-QUM-024
Rev 3.00
Order Recall
Orders that have been bumped can be viewed in a list in the Order Recall
window.
Opening/Closing the Order Recall Window
Press to open/close the Order Recall Window. Bumped
orders appear on the Recall screen –with the last bumped order at
the top and highlighted.
Recalling Orders 1 to 9:
Single press of the key to will recall the order associated with that
ticket number.
Recalling Orders in tickets 10 to 99:
1. Press the 10 key:
2. Single press of the key to to indicate the tens digit, followed
by to bump Order #10 or to to indicate the ones digit.
Offscreen Orders:
To see new orders that are not visible on the main screen press: will shift to
the next page/window of orders.
Pressing will shift back to the previous page/window of orders.

Bump Bar –KB9000
Quick User Manual
111-56-QUM-024
Rev 3.00
Expanded Order View
Anordercanbeselectedtobeviewedinitsownpop-upwindow. Thisisconvenient
if orders span multiple windows and it’s desirable to see the entire order in its own
window or if an order in the last tile extends off screen.
Selecting an Order
Press followed by the tile number for the order:
Selecting Tiles 1-9:
Press the tile number to to select the tile associated with the
desired order.
Selecting Tiles 10-99:
1. Press the 10 key:
2. Single press of the key to for the tens digit, followed by key
for a 0 or to for any other ones digit.

Bump Bar –KB9000
Quick User Manual
111-56-QUM-024
Rev 3.00
Appendix A –Key Mapping
KB 9000’s that may have other template/legends installed can be reprogrammed
according to the mapping in the following table using KB 9000 keyboard USB
Software Utility:
Function Keys
Number keys
Key name
Key command
Key name
Key command
BUMP (Bump)
[Ctrl]
1
[1]
RECALL (Recall)
[PAD-]
2
[2]
SUM (Summary)
[Space]
3
[3]
PAGE (Scroll)
[ArrowDown]
4
[4]
↑ (Scroll up)
[ArrowLeft]
5
[5]
↓ (Scroll down)
[ArrowRight]
6
[6]
REDRAW (Enter)
[Enter]
7
[7]
8
[8]
9
[9]
10
[0]