Epson CD5220 User manual

CD5220
Liquid Crystal
Customer Display
User s manual

CD5220 customer display
INDEX
1. FEATURES 2
2. TYPE CLASSIFICATION 3
3. GENERAL SPECIFICATION 4
4. INTERFACE SPECIFICATION 6
5. FUNCTION SELECTION 12
6. COMMAND 14
7. INSTALLATION GUIDE 23

CD5220 customer display
1. FEATURES
n Data can be displayed on 15 columns x3 lines.
n Blue-green fluorescent color and large character are easyto read.
n The displaypanel is adjustable to provide the best viewangle.
n Provide 2 pole for bast position installation.
n The DIP switch setting emulate commands mode
n CD5220/UTC/AEDEX/ADM787/ADM788/EscPOS/DSP-800
emulation command set, selected byDIP switch or control utility
software.
n User-defined characters can be downloaded. (for
CD5220/DSP-860/EPSON command mode)
n Acode-generated software is provided for customer, and download his
own character to the display(and save to EEPROM,EEPROM is
option).
n International character set is selectable.
n User-defined message can be downloaded to display. (DSP-800 only)
n Displayarea can be controlled bywindowfunction. (EPSON only)
n Provides an interface based on RS-232C or centronics ,And RS232C
baud rate 4800,9600 BPS select byDIP switch , (or setting by
software from300 to 19200bps, EEPROM option)
n Both printer and displaycan be connected to the same port .

CD5220 customer display
2. TYPE CLASSIFICATION
CD5220 -
S
T
12
N
PT
III III IV VVI
No
Type name Type name
Description
I
Mode No. CD5220
CD5220 display
CD6220
CD6220 display
II
Interface S Serial port(RS232c)
P Parallel port(Centronics)
III
Base section
T Rectangle base
C Circular base
IV
Power input
05 DC5V
12 DC12V
24 DC24V
V
Power N no adapter
adaptor 110 AC110V adapter
EU AC230V adapter with EU power core
UK AC230V adapter with EU power core
B power bracket for PC
IV
Pass through
PT With pass through function
function Without pass through function

CD5220 customer display
3. GENERAL SPECIFICATIONS
NO
ITEM CD5220 CD6220
1
Displaymethod Vacuumfluorescent display
2
Number of
character
40 characters ( 20 columns x 2 lines)
3
Displaycolor blue green
4
Brightness 700 cd/m2 850 cd/m2
5
Character type 96 alphanumeric
13 kinds of international character set
1 kind of user define character
6
Character font 5 x 7 dot matrix
7
Character size 9.2mm x 6.4mm 11.2mm x 6.4mm
8
Character pitch 8.3mm 9.9mm
9
Power supply 5VDC/12VDC/24VDC
10
Power consumption 5W/4.5W/4.5W
11
MTBF-power on
time
25000 hours 25000 hours
12
Dimensions panel 226/Wx92/Hx50/D
mm
260/Wx100/Hx64/D mm
support
231 mm,90 mm,231+90 mm
base rectangle base 217.5(w)x82(h)x106(d)mm
circular base 50(h)x70(r)mm

CD5220 customer display
NO
ITEM CD5220 CD6220
13
Viewing angle 8 - 35 degrees -5 ~ 35 degrees
14
Rotation angle Maximum270 degrees
15
Weight 0.92 Kg 1.08 Kg
16
Environmental
Condition
temperature Humidity
Operating : 5 - 45 C -10 - 55 C
Storage 30%-85% 30%-85%
17
Applicable
standards
FCC class A ”CE
Table 3-1

CD5220 customer display
4. INTERFACE SPECIFICATIONS
4.1 Communication
4.1.1 Serial port (RS232C) communication
(a) The interface specification are based on EIARS232C baud rate 9600 or
4800 bps ( select byDIP switch, refer Table 4-7) 8 data bits, none parity, 1
or more stop bits
(b) Serial port (RS232C) communication flow
1. Data flow: PC/host to display, displayto printer, printer to
PC/host
2. Control flow: displayto PC/host, printer to display, PC/host to
printer
(c) CD5220/CD6220 will inactive DTR or RTS signal to PC/host, the
following two condition.
1. Printer inactive DTR or RTS signal.
2. The pass through buffer in CD5220/CD6220 is full ( 200bytes ) .
*IfPC/host keep transmitting the data to printer when CD5220/CD6220
inactive DTR or RTS , data will be lost.
4.1.2 Parallel port (Centronic) communication
(a) data flow: PC/Host to display, displayto printer
(b) control flow: printer to display, displayto PC/Host
(c) When data has been transmitted to printer byparallel port interface, the
CD5220/CD6220 response the printer status to PC/Host, When printer
active the BUSY signal, CD5220/CD6220 will keep accept the data until the

CD5220 customer display
buffer is full, (the buffer size is 200 bytes), then active the BUSY signal to
PC/host.
4.2 Serial port interface for rectangle basic section
(a) Serial port interface connector position for rectangle basic section

CD5220 customer display
(b) Power input
Connector type : DC JACK (5.5/2.1)
(c) RS232C to PC/HOSTconnector pin assignment
Connector type : D-sub 25 pin (Female)
No
Signal
direction Function description
1 FG - Frame ground
2 TXD
Fromprinter to PC/Host
Printer status data
3 RXD
FromPC/Host to display
Receive data
4 RTS
Fromdisplayto PC/Host
Display/printer readysignal
5 CTS
FromPC/Host to printer
PC/Host readysignal
6 DSR
FromPC/Host to printer
PC/Host readysignal
7 GND
- Signal ground
16
V+ Input(optional) Ifusing power built-in
20
DTR
Fromdisplayto PC/Host
Display/printer readysignal
Table 4-1
(d) RS232C to printer connector pin assignment
Connector type : D-sub 9 pin (Male)
No
Signal
direction Function description
2 RXD
Fromprinter to PC/Host
Printer status data
3 TXD
Fromdisplayto printer Transmit data
4 DTR
FromPC/Host to printer
PC/Host readysignal
5 GND
- Signal ground
6 DSR
Fromprinter to display Printer readysignal
7 RTS
FromPC/Host to printer
PC/Host readysignal
8 CTS
Fromprinter to display Printer readysignal
Table 4-2

CD5220 customer display
4.1.3 Serial port interface for circular base
(a) Power connector of Power cable
Connector type : DC jack (5.5/2.1 )
(b) RS232C interface to PC/HOSTcable,
PC/HOSTside connector pin assignment
Connector type : D-sub 9 pin (Female)
No
Signal
direction Function description
1 FG - Frame ground
2 TXD
Fromprinter to PC/Host
Printer status data
3 RXD
FromPC/Host to display
Receive data
4 DSR
FromPC/Host to printer
PC/Host readysignal
5 GND
- Signal ground
6 DTR
Fromdisplayto PC/Host
Display/printer readysignal
7 CTS
FromPC/Host to printer
PC/Host readysignal
8 RTS
Fromdisplayto PC/Host
Display/printer readysignal
Table 4-3
(c) RS232C interface to printer cable,
printer side connector pin assignment
Connector type : D-sub 25 pin (Male)
No
Signal
direction Function description
2 RXD
Fromprinter to PC/Host
Printer status data
3 TXD
Fromdisplayto printer
Transmit data
4 CTS
Fromprinter to display Printer readysignal
5 RTS
FromPC/Host to printer
PC/Host readysignal
6 DTR
FromPC/Host to printer
PC/Host readysignal
7 GND
- Signal ground
20
DSR
Fromprinter to display Printer readysignal
Table 4-4

CD5220 customer display
4.3 Parallel port (Centronic) interface for circular base
(a) Power connector of Power cable
Connector type : DC jack (5.5/2.1 )
(b)Parallel interface to PC/HOSTcable,
PC/HOSTside connector pin assignment
Connector type : D-sub 25 pin (Male)
No
Signal Name
Direction Function description
1 /STB Input Strobe signal to read data
2-9
Data0 -
Data7 Input Parallel signal data
10
/ACK Output Data request signal
11
BUSY Output BUSY state fromthe display
12
PE Output Always negative logic
13
SELECT Output Always positive logic
15
/ERROR Output Always positive logic
Table 4-5
(c) Parallel interface to Printer cable,
Printer side connector pin assignment
Connector type : D-sub 25 pin (Female)
No.
Signal Name
Direction Function description
1 /STB output strobe signal to write data
2-9
Data0-Data7
output parallel signal data
11
BUSY input BUSY state fromthe printer
14
AUTFEED
output Always positive logic
16
RESET output Always positive logic
17
SELE_IN output Always positive logic
Table 4-6

CD5220 customer display

CD5220 customer display
5. FUNCTION SELECTION
5.1 Baud rate
SW number SW1 Function description Baud rate bps
OFF 9600
ON 4800
Table 5-1
notes: SW1 is ignores when baud rate is store to EEPROM (EEPROM type
only),
baud rate will be refer the EEPROM baud rate status.
5.2 International character set
SW number Function description
SW2
SW3
SW4
SW5
International
character set(code
20H-7FH)
Code table
(code 80H-FFH)
OFF
OFF
OFF
OFF
U.S.A. PC-437
(USA,standard Europe)
ON
OFF
OFF
OFF
FRANCE PC-850(multilingual)
OFF
ON
OFF
OFF
GERMANY PC-850(multilingual)
ON
ON
OFF
OFF
U.K. PC-850(multilingual)
OFF
OFF
ON
OFF
DENMARK I PC-850(multilingual)
ON
OFF
ON
OFF
SWEDEN PC-850(multilingual)
OFF
ON
ON
OFF
ITALY PC-850(multilingual)
ON
ON
ON
OFF
SPAIN PC-850(multilingual)
OFF
OFF
OFF
ON
JAPAN Katakana
ON
OFF
OFF
ON
NORWAY PC-850(multilingual)
OFF
ON
OFF
ON
DENMARK II PC-850(multilingual)
ON
ON
OFF
ON
SLAVONIC
OFF
OFF
ON
ON
RUSSIA
ON
OFF
ON
ON
Factorydefine
OFF
ON
ON
ON
Factorydefine
ON
ON
ON
ON
User define pattern

CD5220 customer display
Table 5-2
5.3 Command type select
SW number Function description Software defined
SW6 SW7 SW8 Command type Hex code
OFF OFF OFF CD5220 07
ON OFF OFF UTC/S 06
OFF ON OFF UTC/P 05
ON ON OFF AEDEX 04
OFF OFF ON ADM 787 03
ON OFF ON ADM 788 02
OFF ON ON ESC/pos 01
ON ON ON DSP800 00
Table 5-3

CD5220 customer display
6. COMMAND
6.1 CD5220 standard mode command list
Command Code description(hex)
Function description
ESC DC1 1B 11 overwrite mode
ESC DC2 1B 12 vertical scroll mode
ESC DC3 1B 13 horizontal scroll mode
ESC Q
A ..........CR 1B 51 41 [n ]x20 0D set the string displaymode, write string to upper line
ESC Q
B ..........CR 1B 51 42 [n ]x20 0D set the string displaymode, write string to lower line
ESC Q
D ..........CR 1B 51 44 [n ]xm0D m<40 upper line message scroll continuously
ESC [ D 1B 5B 44 move cursor left
BS 08 move cursor left
ESC [ C 1B 5B 43 move cursor right
HT 09 move cursor right
ESC [ A 1B 5B 41 move cursor up
ESC [ B 1B 5B 42 move cursor down
LF 0A move cursor down
ESC [ H 1B 5B 48 move cursor to home position
HOM 0B move cursor to home position
ESC [ L 1B 5B 4C move cursor to left-most
position
CR 0D move cursor to left-most
position
ESC [ R 1B 5B 52 move cursor to right-most
position
ESC [ K 1B 5B 4B move cursor to bottomposition
ESC l x y 1B 6C x y
1<=x<=20,y=1,2 move cursor to specified position
ESC @ 1B 40 initialize display
ESC W s x1 x2 y 1B 57 1 x1 x2 y
1<=x1<=x2<=20 y=1,2
set or cancel the windowrange
at horizontal scroll mode

CD5220 customer display
Command Code description
(hex) Function description
CLR 0C clear displayscreen , and clear
string mode
CAN 18 clear cursor line, and clear
string mode
ESC *n 1B 2An
1<=n<=4 brightness adjustment
ESC & s n m
[a (p1..pa)]x
(m-n+1)
1B 26 1 n m
[a(p1..pa)]x (m-n+1)
20<n<=m<=FF
define download characters.
a=1-
5
p1..p5 =row1..row5
ESC ? 1B 3F delete download characters.
ESC % 1B 25
select/cancel download
character set.
ESC _ n 1B 5F n
n=0,1 set cursor ON/OFF
ESC fn 1B 66 n select international fonts set
ESC c n 1B 63 n select fonts ,ASCII code or JIS
code
ESC = n 1B 3D n
n=1,2,3,31,32,33
select peripheral device, Display
or Printer
ESC s 1 1B 73 01 store the use define character
into EEPROM
ESC d 1 1B 64 01 store the use define character
fromEEPROM
Table 6-1
(REMARK)* While using command "ESC QA" or "ESC QB", these two commands could
using combinewith terminalprinter -- TP 2688.or TP3688
* If using commands "ESC QA" or "ESC QB ,others commands can not beused except
using command "CLR" or "CAN" to change operating mode.
* If using commands "ESC QD,upper line message move continuously, till receive a new
command, and clear upper lineand movecursor to upper lineleft-most position.
Set international font set( Table 6-2) Select code table(Table
6-3)
n
internationalfont set
n
internationalfont set
n internationalfont set
A
U.S.A. N
NORWAY
A compliancewith ASCII code

CD5220 customer display
G
I
J
U
F
S
GERMANY
ITALY
JAPAN
U.K.
FRANCE
SPAIN
W
D
E
L
R
SWEDEN
DENMARKI
DENMARKII
SLAVONIC
RUSSIA
reserved
J
R
L
compliance with JIS code
compliance with RUSSIAcode
compliancewith SLAVONIC code
6.2 UTC standard mode command list
Command Code description
(hex) Function description
BS 08 back space
HT 09 horizontal tab
LF 0A line feed
CR 0D carriage return
DLE 0F displayposition
DC1 11 over write displaymode
DC2 12 vertical scroll mode
DC3 13 cursor on
DC4 14 cursor off
ESC d 1B 64 change to UTC enhanced mode
US 1F clear display
Table 6-4
6.3 UTC enhanced mode commandlist
Command Code description
(hex) Function description
ESC u A ....CR 1B 75 41 [ data x
40]0D upper line display
ESC u B ....CR 1B 75 42 [ data x
40]0D bottomline display
ESC u D ....CR 1B 75 44 [ data x
40]0D upper line message scroll continuously
ESC u E ....CR 1B 75 45 hh :mm 0D
h,m= 0-9displaytime
ESC u F ....CR 1B 75 46 [ data x
40]0D upper line message scroll once pass
ESC u H ....CR 1B 75 48 n m0D
20h<=n,m change attention code

CD5220 customer display
ESC u I ....CR 1B 75 49 [ data x
40]0D two line display
ESC RS CR 1B 0F 0D change to UTC standard mode
Table 6-5

CD5220 customer display
6.4 AEDEX mode command list
Command Code description
(hex) Function description
!#1 ....CR 21 23 31 [data x 40]0D
upper line display
!#2 ....CR 21 23 32 [data x 40]0D
bottomline display
!#4 ....CR 21 23 34 [data x 40]0D
upper line message scroll
continuously
!#5 ....CR
21 23 35 hh :mm 0D
h,m= 0-9displaytime
!#6 ....CR 21 23 36 [data x 40]0D
upper line message scroll once
pass
!#8 ....CR 21 23 38 n m0D
20h<=n,m change attention code
!#9 ....CR 21 23 39 [data x 40]0D
two line display
Table 6-6
6.5 ADM787/788 mode command list
Command Code description
(hex) Function description
CLR 0C clear display
CR 0D carriage return
SLE1 0E clear up line and move cursor to
upper line left most end
SLE2 0F clear lowline and move cursor
to lower line left most end
DC0 10 n set period to upper line last n
position31H<=n<=37H
DC1 11 n set line blanking ,
n= 1up line, n= 2lowline
DC2 12 n clear line blanking ,
n= 1up line, n= 2lowline
SF1 1E clear field 1 and move cursor to
field 1 fast position
SF2 1F clear field 2 and move cursor to
field 2 fast position
Table 6-7

CD5220 customer display
6.6 DSP-800 mode command list
Command Code description
(hex) Function descriptions
EOTSOH I n ETB
04 01 49 n 17 select international character
set.
EOTSOH P n ETB
04 01 50 n 17
n=31-58 move cursor to specified position.
EOTSOH C n m
ETB 04 01 43 n m17 31<= n<=m<=58 clear displayrange fromn position tom position and
move cursor to n position.
EOTSOH S n ETB
04 01 53 n 17
n=31-35 save the current displaying data to nlayer for demo display.
EOTSOH D n m
ETB 04 01 44 n m17 n=31-4F m=31-33 displaythe saved data
EOTSOH An
ETB 04 01 41 n 17 n=31-34 brightness adjustment.
EOTSOH F n ETB
04 01 46 n 17
00<=n<=FF blink displayscreen.
EOTSOH & n
[px5] ETB
04 01 26 n p1...p5 17,
20<=n define download characters
EOTSOH ?n ETB
04 01 3F n 17
20<=n delete download characters.
EOTSOH = n ETB
04 01 3D n 17
n= 1, 2select peripheral device. n= 1,printer n= 2,display
EOT SOH % ETB
04 01 25 17 initialize display
EOT SOH @ ETB
04 01 40 17 execute self-test
Table 6-8
(REMARK)* About the command displaythe saved data(Table 6-9)
n layselect
n layselect
m showmode
bit 0=1
lay1 bit 3=1
lay4
bit 0=1 showmode 1