Epson EB-1485Fi User manual

Installation Guide

About This Installation Guide
1
Contents of this Guide
This guide contains the following information.
Installing an ultra-short throw projector (EB-1485Fi/EB-1480Fi) using the wall mount (ELPMB62)
Installing the Touch Unit (ELPFT01)
Installing the Touch Unit using the touch unit bracket (ELPMB63)
Installing the Control Pad (ELPHD02)
Installing the Pen Stand
Equipment and mounts/brackets that are not included can be purchased as optional accessories.

Contents
2
About This Installation Guide
ContentsofthisGuide ................. 1
Introduction
UsingtheProductSafely ............... 4
Safetyindications .......................4
ExplanationofSymbols ................... 4
Package Contents . . ................... 5
Wallmount ............................ 5
MainMount ......................... 5
Accessories .......................... 6
TouchUnit ............................ 7
Items to prepare in addition to items
supplied with the product ...............8
TouchUnitBracket ...................... 8
Items to prepare in addition to items
supplied with the product ...............8
ControlPad ............................ 9
Items to prepare in addition to items
supplied with the product ...............9
Penstand ............................. 9
Items to prepare in addition to items
supplied with the product ..............10
InstallationWorkFlow ............... 11
WhenInstallingMultipleProjectors .......... 12
Figures of Installation Dimensions . . . . 13
ConnectionFigure ................... 15
Connecting the Touch Unit and the Control Pad . 15
ConnectingMultipleProjectors ............. 16
When using the interactive function . . . . . . . 16
When not using the interactive function . . . . 16
Installing the Wall mount
Cautions on Installing the Wall Mount . 18
CautionsontheInstallation Location of
theWallMount ...................... 22
WallMountSpecifications ............ 24
Externaldimensions ..................... 25
Adjustmentrange ...................... 27
Verticalslide ........................ 27
Horizontalslide ...................... 28
Forward/backwardslide ................ 28
MiniPCinstallationplate ................. 29
Installation Procedure for the Wall
Mount .............................. 30
InstallingtheBracket .................... 31
Determining the installation position
(projectiondistancetables) .............. 31
Attaching the adjustment unit to the
projector ........................... 43
Installthewallplateonthewall..........45
Attaching the setting plate to the wall plate . . 47
Attaching the adjustment unit to the setting
plate .............................. 51
Attachingperipheraldevices............52
Adjusting the position of the projected image . . 55
Preparationsbeforeadjusting ............ 56
AutoScreenAdjustment ................ 58
Performing mechanical adjustment using
theSettingPlateInstallationGuide........61
Adjusting using the projector menus . . . . . . . 64
Attachingthecovers ....................70
AttachingaSecurityCable ................72
Installing the Control Pad
NotesontheControlPad ............. 73
ForCanadianUsers .....................76
ControlPadSpecifications ............ 77
Externaldimensions ..................... 77
Cableroutingholes ..................... 77
InstallingtheControlPad ............ 79
Installing the pen stand
NotesonthePenStand ............... 82
PenStandSpecifications ............. 83
Externaldimensions ..................... 83
InstallingthePenStand .............. 84
Whensecuringwithmagnets ..............84
Whensecuringwithscrews ................ 85

Contents
3
Adjusting the Interactive Pen
CalibratingtheInteractivePen ........ 86
ManualCalibration ...................... 86
AutoCalibration ....................... 88
Installing the Touch Unit
Notes on handling the Touch Unit . . . . . 90
ForCanadianUsers ..................... 91
TouchUnitinstallationlocation ....... 92
NotesontheTouchUnitBracket ............ 93
Notes on the Laser ................... 94
Attachedlabels ........................ 94
Laserdiffusionport ..................... 94
TouchUnitSpecifications ............. 96
Externaldimensions ..................... 96
TouchUnitBracketSpecifications ..... 97
Externaldimensions ..................... 97
Adjustmentrange ...................... 98
InstallingtheTouchUnit ............. 99
Installingtheinfrareddeflectors ............99
InstallingtheTouchUnit ................. 100
When installing on the projection surface
without using the Touch UnitBracket..... 100
When using the Touch Unit Bracket to install
outsideoftheprojectionsurface ......... 103
AttachingaSecurityCable ............... 108
TurningontheTouchUnit ............... 109
Adjusting the Angle of the Laser (Touch Unit
AutoSetup) .......................... 110
Whenautoadjustmentfails............ 116
Calibrating the touch operationposition ..... 119
Setting the Projector
BatchSetupFunction ............... 122
SetupUsingaUSBflashdrive ............. 122
SavingsettingstotheUSBflashdrive..... 122
Copying saved settings to other projectors . 123
Setup by Connecting the Computer and
ProjectorwithaUSBCable ............... 124
Savingsettingstoacomputer ........... 124
Copying saved settings to other projectors . 125
WhenSetupFails ...................... 127
Installing Multiple Projectors (Multi-
Projection) ......................... 128
SettingtheProjectorID ................. 128
Multi-Projection Connection Settings . . . . . . . 130
When using the interactive functions . . . . . . 130
When not using the interactive functions . . . 132
HDMILinksettings ..................... 133
AdjustingtheImageinMulti-Projection ...... 134
Projector Sync. Settings (only when using
interactivefunctions) ................... 135
EDID settings (only when using interactive
functions) ........................... 136
Appendix
ListofSafetySymbols ............... 138
GeneralNotice ..................... 141

Introduction
4
Using the Product Safely
For your safety, read all the instructionsin this guide before using this product. Incorrect handling that ignores
instructions in this guide could damage this product or could result in personal injury or property damage.
Keep this installation guide at hand for future reference.
Read the User'sGuide and Safety Instructions for your projector and follow the instructions in these documents.
Safety indications
The documentation and this product use graphical symbols to show how to use this product safely.
The indications and their meaning are as follows. Make sure you understand them properly before reading
the guide.
Symbol Explanation
Warning This symbol indicates information that, if ignored, could possibly result in personal injury or
even death due to incorrect handling.
Caution This symbol indicates information that, if ignored, could possibly result in personal injury or
physical damage due to incorrect handling.
Explanation of Symbols
Symbols Explanation
Symbol indicating an action that must not be done
Symbol indicating an action that should be done
c
Symbol indicating related or useful information

Introduction
5
Package Contents
Confirm that you have all necessary items before beginning installation.
Wall mount
Main Mount
M4x12mm
No. Part name
End cap
Adjustment unit
Setting plate
Wall plate
Wall plate cover
Hexagonal axis

Introduction
6
Accessories
Part Name Application
Template sheet Attach this to the wall before attaching
the wall plate, and use it to drill neces‐
sary holes.
Mini PC plate Attach this to the wall plate when in‐
stalling a mini PC or stick PC.
Mini PC belt Secure the PC to the plate when at‐
taching a mini PC or a stick PC that can‐
not be attached using screws.
Cable binding belt Secure excess cables after performing
wiring.
Masking sticker Stick this over the groove in the arm of
setting plate to cover it up after instal‐
ling.
Safety wire set Connect to the wall mount and the
projector to prevent the projector from
falling. See the user's guide supplied
with the safety wire set for more details.
Hexagon wrench (for M4) -
No.13 open-ended spanner
(for M8 and M6), No. 6
(for hexagonal axis)
-
M4 x 12 mm hexagon sock‐
et head cap bolt with wash‐
er/spring washer (x13)

Assemble the wall plate as shown in
the figure on p.5 (x5)

Secure the adjustment unit to the pro‐
jector (x4)

Secure the adjustment unit to the set‐
ting plate (x4)

Introduction
7
Part Name Application
M6 x 20 mm hexagon
shoulder head bolt with
washer/spring washer (x1)
Secure the setting plate to the wall
plate.
M6 x 20 mm cross recessed
head shoulder screws with
plastic washers (x3)
M3 x 6 mm cross recessed
head shoulder screws (x4)
Secure the mini PC plate to the wall
plate.
Items to prepare in addition to items supplied with the product
Prepare commercially available products such as anchor bolts to secure the wall plate to the wall.
M10 or 3/8 inch x 60 mm anchor bolts (for securing the wall plate: at least x4)
M10 screw (for securing the wall plate temporarily: x1)
Make sure you prepare cables to connect the projector to devices such as mini PCs in advance.
For details on the cable connections for your devices, see the projector's User's Guide (on the Document CD-ROM).
Touch Unit
Part Name Application
Touch Unit -
Template sheet (for secur‐
ing the Touch Unit)
Attach this to the wall before attaching
the Touch Unit, and use it to drill nec‐
essary holes.
Touch Unit connection ca‐
ble (approx. 1.8m)
Connect the Touch Unit to the projec‐
tor.
Markers x2 Attach to the screen to adjust the angle
of the laser emitted by the Touch Unit.
Tape for securing the mark‐
ers
(approx. 6 cm) x12
Secure the markers to the projection
surface.

Introduction
8
Part Name Application
Infrared deflectors
(approx. 28.5 cm) x12
Use these when there is a tray or frame
at the bottom of the projection surface.
This prevents malfunctions due to laser
reflections.
Spacers for screw holes x3 Attach them to the screw hole when
securing the Touch Unit with screws.
Label x4 Attach the label in the position of the
Touch Unit. These provide markers
when repositioning due to movement
that occurs during use.
Items to prepare in addition to items supplied with the product
When securing the Touch Unit with screws, prepare two commercially available M4 screws.
Touch Unit Bracket
Use this when attaching the Touch Unit to outside of the projection surface.
Part Name Application
Touch Unit Bracket -
Template sheet (for Touch
Unit Bracket)
Attach this to the wall before attaching
the Touch Unit Bracket, and use it to
drill necessary holes.
M4 x 25mm hexagon socket
head cap bolts (x2)
Secure the Touch Unit to the Touch
Unit Bracket.
Hexagon wrench (for M4) -
Items to prepare in addition to items supplied with the product
Use commercially available anchor bolts or screws to secure the Touch Unit Bracket to the wall.
M4 anchor bolts (x4)
3.8 mm diameter wood screws with a length of 45 mm or more (x4)

Introduction
9
Control Pad
Part Name Application
Control Pad -
Power cable
(approx. 1.8 m)
Power the Control Pad.
AC adapter
AC adapter holder Secure the AC adapter to the wall.
USB cable (approx. 1.8 m) Connects the Control Pad to the com‐
puter.
Items to prepare in addition to items supplied with the product
Use commercially available M4 x 20 mm screws (x4) to secure the Control Pad to the wall.
Pen stand
Part Name Application
Main unit -

Introduction
10
Part Name Application
Cover Attach to the front of the pen stand.
Spacers for screw holes x3 Attach them to the screw hole when
securing the pen stand with screws.
Items to prepare in addition to items supplied with the product
When securing the pen stand with screws, prepare commercially available M4 x 20 mm screws (x2).

Introduction
11
Installation Work Flow
We recommend installing the projector and peripheral devices in the following order.
a
Mount projector on wall and adjust the projected image (sp.18)
b
Install the Control Pad (sp.73)
c
Install the pen stand (sp.82)
d
Perform pen calibration (sp.86)
e
Install and adjust touch unit and perform finger touch calibration (sp.90)

Introduction
12
When Installing Multiple Projectors
a
Install wall mounts for all projectors (sp.18)
b
Install the Control Pad (sp.73)
c
Install the pen stand (sp.82)
d
Calibrate the Interactive Pen (sp.86)
e
Install and adjust touch unit and perform finger touch calibration (sp.90)
f
Select Multi-Projection settings (sp.128)
g
Calibrate the Interactive Pen (sp.86)
h
Calibrating touch function operations (sp.119)

Introduction
13
Figures of Installation Dimensions
You need the following space to install the projector and the touch unit.
Leaving a gap of approximately 100 mm from the ceiling to the top of the wall plate makes it easier to install and
remove the projector.
When using the Touch Unit, install the projector so that there is a gap between the projected image and the edges
of the screen as shown in the following image.
100mm
5.7 - 50mm
(20 - 50mm (16:6, 21:9))
20mm
100mm100mm
When projecting a screen with multiple projectors, use the Edge Blending function to create a seamless image. When
projecting a screen with an aspect ratio of 3:1, set the Blend Range for Edge Blending to 600.

Introduction
14
600
c
If you cannot set the Blend Range to 600, you can also set it to a value that is less than 600.
If you set a value less than 600, black bands may appear on the left and right of the image.

Introduction
15
Connection Figure
Connecting the Touch Unit and the Control Pad
You need the following cables when using the Touch Unit and the Control Pad.
Prepare a commercially available LAN cable and USB cable to connect the projector and the Control Pad.
(1080p60p:Max70m(CAT6a/CAT7))
(4K30p:Max40m(CAT6a/CAT7))

Introduction
16
Connecting Multiple Projectors
You need the following cables when installing multiple projectors.
Check the User's Guide for any other cables you may need.
When using the interactive function
You can install up to two projectors when using the interactive function.
c
When two projectors are installed side-by-side, you can only use interactive mouse operations.
When drawing on the projection screen, use the drawing application Easy Interactive Tools. You can
download this from the following Website.
http://epson.sn/
(Max 5m)
When not using the interactive function
You can install two to four projectors when not using the interactive function.
The following image is an example of connecting three projectors.

Introduction
17
(Max 5m)
(Max 5m)

Installing the Wall mount
18
Cautions on Installing the Wall Mount
Warning
The Wall mount is exclusively for mounting the projector on a wall. If anything other than
a projector is mounted, the weight may result in damage.
If this product falls, it could cause death or personal injury.
The installation work (wall mounting) should be performed by specialists who have tech‐
nical knowledge and ability. Incomplete or incorrect installation could cause the product
to fall and cause personal injury or property damage.
Follow the steps in this guide to install the Wall mount, and be sure to use the bolts and
screws specified in this guide.
If the instructions are not followed, this product may fall, resulting in personal injury or an accident.
Handle the power cord carefully.
Incorrect handling may cause fire or electric shock. Observe the following precautions when han‐
dling:

Do not handle the power plug with wet hands.

Do not use a power cord that is damaged or modified.

Do not pull the power cord with too much force when routing the cable through the setting plate.
Do not install the setting plate in a place where it might be subjected to vibration or shock.
This could cause damage to the projector or mounting surface. If this product falls, it could cause
death or personal injury.
When installing on a wall, install so that it can sufficiently support the mass of the projector
and the Wall mount and resist any horizontal vibration. Use M10 or 3/8 inch x 60 mm nuts
and bolts.
Nuts and bolts smaller than M10 or 3/8 inch x 60 mm could cause the setting plate to fall. Epson
accepts no responsibility for any damage or injury caused by lack of wall strength or inadequate
installation.
The installation work should be performed by at least two qualified service personnel. If
you need to loosen any screws during installation, be careful not to drop this product.
If this product falls, it could cause death or personal injury.
When installing this product on a wall, the wall requires enough strength to hold the pro‐
jector and the Wall mount.
This product should be installed on a concrete wall.
The maximum combined weight of the projector and the Wall mount is approximately 18.9kg (not
including cables).
Ensure the strength of the wall before mounting this product on the wall. If the wall is not strong
enough, reinforce the wall before installation.
Inspect the setting plate on a regular basis to ensure there are no broken parts or loose
screws.
If any parts are damaged, stop using the setting plate immediately. If this product falls, it could
cause death or personal injury.

Installing the Wall mount
19
Warning
Do not disassemble or remodel this product.
There are numerous high-voltage sections inside the product that could cause a fire, electric shock,
or an accident.
Do not hang on this product. Do not hang heavy objects on this product.
If this product falls, it could cause death or personal injury.
Do not use adhesives, lubricants, or oils to install or adjust the Wall mount.
If you use adhesives to prevent the screws from loosening or things such as lubricants or oils on
the slide plate fixing part of the projector, the case may crack and cause the projector to fall,
resulting in personal injury or property damage.
Tighten all screws firmly after adjustment.
Otherwise, the product may fall and cause personal injury or property damage.
Never loosen the bolts and nuts after installation.
Confirm that the screws have not become loose on a regular basis. If you find any loose screws,
tighten them firmly. Otherwise, the product may falland cause personal injury or property damage.
Route the cables so that they are not interfered with the nuts and bolts.
Incorrect handling of the cables may cause fire or electric shock.
When turning on the projector, do not look into the projection lens.
This could cause damage to eyesight due to the powerful light emitted. Take particular care when
there are children present. When turning on the projector at a distance using the remote control,
make sure there is no one looking into the projection lens.
When using the projector, do not place any objects or put your hand near the projection
lens.
This area is dangerous as it reaches a high temperature due to the concentrated projection light.
Do not use the projector in a location subject to combustible or explosive gas.
High temperatures within the projector may cause ignition and a fire to occur.
Only a specialist should remove or reinstall the projector, including for maintenance and
repairs.
See the projector's User's Guide for instructions on maintenance and repairs.
If any abnormalities occur with this product, immediately disconnect the cables from the
product, and then contact your local dealer or the nearest Epson service call center.
Continuing to use the product in an abnormal condition could cause a fire, electric shock, or visual
impairment.