Epson SC-B6000 User manual

User’s Guide
CMP0009-00 EN

Copyrights and Trademarks
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed
only for use with this Epson printer. Epson is not responsible for any use of this information as applied to other printers.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses
incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to
this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.
Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those
designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
Seiko Epson Corporation shall not be held liable forany damage resulting from electromagnetic interference that occurs from the use of any interface cables
other than those designated as Epson Approved Products by Seiko Epson Corporation.
EPSON
®
and Epson UltraChrome
®
are registeredtrademarks, and EPSON EXCEED YOUR VISION orEXCEED YOUR VISION isa trademark of Seiko
Epson Corporation.
Microsoft
®
, Windows
®
, Windows Vista
®
and PowerPoint
®
are registered trademarks of Microsoft Corporation.
Intel
®
is a registered trademark of Intel Corporation.
PowerPC
®
is a registered trademark of International Business Machines Corporation.
Adobe
®
, Photoshop
®
, Elements
®
, Lightroom
®
, and Adobe
®
RGB are registered trademarks of Adobe Systems Incorporated.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any
and all rights in those marks.
© 2012 Seiko Epson Corporation. All rights reserved.
SC-B6000 Series User’s Guide
Copyrights and Trademarks
2

Contents
Copyrights and Trademarks
Introduction
ImportantSafetyInstructions.................5
When choosing a place for this product. . . . . . . . 5
Whensettingupthisproduct...............5
Whenusingthisproduct...................5
Whenhandlingtheinkpacks...............6
NoteonthisGuide.........................6
MeaningofSymbols......................6
Illustrations............................6
OperatingSystemVersions.................6
PrinterParts..............................7
Frontsection...........................7
Slider................................10
Rollpaperadapter.......................10
Controlpanel..........................11
ScreenView...........................12
Features................................14
RealizingHighProductivity................14
InsistenceonEase-of-Use.................14
NotesonUsageandStorage..................15
Installationspace.......................15
Noteswhenusingtheprinter...............15
Noteswhennotusingtheprinter............15
Notes on Handling Ink Packs and Ink Tanks
....................................16
Notesonhandlingpaper..................16
IntroducingtheSuppliedSoftware.............18
ContentsoftheSoftwareDisc..............18
StartingEPSONLFPRemotePanel2.........19
ExitingEPSONLFPRemotePanel2.........19
UninstallingSoftware......................19
Basic Operations
LoadingandRemovingtheRollPaper..........21
LoadingRollPaper......................21
Cuttingtherollpaper....................23
Removingtherollpaper..................24
ViewingandChangingMediaSettings..........25
CheckingMediaSettings..................25
AdjustingSettings.......................26
ReplacingPaper..........................26
Installing the Attachment for Auto Take-up Reel
Unit(Optional)...........................27
UsingtheAutoTake-upReelUnit(Optional)....29
UsingtheControlPanel..................29
AttachingthePaper......................30
Removing Paper from the Auto Take-up Reel
Unit.................................33
BeforePrinting...........................33
Saving Optimal Settings for the Current paper
(PrintPaperSettings)......................34
CustomPaperSettingDetails...............34
SavingSettings.........................34
Printablearea............................37
Turning Off the Power Using Power Off Timer
......................................38
CancelingPrinting........................39
Using the Control Panel Menu
MenuOperations.........................40
MenuList...............................41
MenuDescriptions........................44
PrintQueuesmenu......................44
Papermenu...........................44
Maintenancemenu......................47
Setupmenu...........................47
Maintenance
AdjustingthePrintHead....................52
Checkingforcloggednozzles...............52
Cleaningtheprinthead...................53
Minimizing Print Misalignments (Head
Alignment)............................53
ReplacingandRefillingConsumables...........55
Time Period for Chip Unit Replacements and
InkRefills.............................55
ProcedureforReplacementandInkRefills.....55
ReplacingMaintenanceBoxes..............58
ReplacingtheCutter.....................59
DisposalofUsedConsumables...............61
PartsThatArePeriodicallyReplaced...........61
CleaningthePrinter.......................62
Cleaningtheoutside.....................62
Cleaningtheinside......................62
SC-B6000 Series User’s Guide
Contents
3

Problem Solver
WhattoDoWhenaMessageIsDisplayed.......64
When a Maintenance Call/Service Call Occurs. . . . 65
Troubleshooting..........................66
You cannot print (because the printer does not
work)................................66
The printer sounds like it is printing, but
nothingprints..........................66
Theprintsarenotwhatyouexpected.........67
Feedingorejectingproblems...............68
Others...............................69
Appendix
OptionsandConsumableProducts............71
SupportedMedia.........................73
RollPaper.............................73
MovingandTransportingthePrinter...........73
MovingthePrinter......................73
Transport.............................74
SystemRequirements......................74
SpecificationsTable........................75
StandardsandApprovals..................76
Where To Get Help
TechnicalSupportWebSite..................77
ContactingEpsonSupport...................77
BeforeContactingEpson..................77
HelpforUsersinNorthAmerica............78
HelpforUsersinEurope..................78
HelpforUsersinAustralia................78
HelpforUsersinSingapore................79
HelpforUsersinThailand................79
HelpforUsersinVietnam.................79
HelpforUsersinIndonesia................79
HelpforUsersinHongKong..............80
HelpforUsersinMalaysia.................80
HelpforUsersinIndia...................80
HelpforUsersinthePhilippines............81
Software License Terms
OpenSourceSoftwareLicenses...............82
Bonjour..............................84
OtherSoftwareLicenses....................89
Info-ZIPcopyrightandlicense..............89
SC-B6000 Series User’s Guide
Contents
4

Introduction
Important Safety
Instructions
Read all of these instructions before using the printer.
Also be sure to follow all warnings and instructions
marked on the printer.
When choosing a place for this
product
❏Place this product on a flat, stable surface that is
larger than this product. This product will not
operate properly if it is tilted or at an angle.
❏Avoid places subject to rapid changes in
temperature and humidity. Also keep it away from
direct sunlight, strong light, or heat sources.
❏Avoid places subject to shocks and vibrations.
❏Keep this product away from dusty areas.
❏Place this product near a wall outlet where the plug
can be easily unplugged.
When setting up this product
❏Do not block or cover the openings in this product’s
cabinet.
❏Do not insert objects through the slots. Take care
not to spill liquid on this product.
❏This product’s power cord is for use with this
product only. Use with other equipment may result
in fire or electric shock.
❏Connect all equipment to properly grounded
power outlets. Avoid using outlets on the same
circuit as copiers or air control systems that
regularly switch on and off.
❏Avoid electrical outlets controlled by wall switches
or automatic timers.
❏Keep the entire computer system away from
potential sources of electromagnetic interference,
such as loudspeakers or the base units of cordless
telephones.
❏Use only the type of power source indicated on the
product’s label.
❏Use only the power cord that comes with this
product. Use of another cord may result in fire or
electric shock.
❏Do not use a damaged or frayed power cord.
❏If you use an extension cord with this product,
make sure the total ampere rating of the devices
plugged into the extension cord does not exceed the
cord’s ampere rating. Also, make sure the total
ampere rating of all devices plugged into the wall
outlet does not exceed the wall outlet’s ampere
rating.
❏Do not attempt to service this product yourself.
❏Unplug this product and refer servicing to qualified
service personnel under the following conditions:
The power cord or plug is damaged; liquid has
entered the product; the product has been dropped
or the cabinet damaged; the product does not
operate normally or exhibits a distinct change in
performance.
❏If you plan to use the printer in Germany, observe
the following:
To provide adequate short-circuit protection and
over-current protection for this printer, the
building installation must be protected by a 10 or 16
amp circuit breaker.
❏If damage occurs to the plug, replace the cord set or
consult a qualified electrician. If there are fuses in
the plug, make sure you replace them with fuses of
the correct size and rating.
When using this product
❏Do not put your hand inside this product.
❏Do not move the print heads by hand; otherwise
you may damage this product.
SC-B6000 Series User’s Guide
Introduction
5

❏Always turn the product off using the Power button
on the control panel. When this button is pressed,
the Power light flashes briefly then goes off. Do not
unplug the power cord or turn off the product until
the Power light stops flashing.
When handling the ink packs
❏Keep ink packs out of the reach of children and do
not drink.
❏Wear protective eyewear and gloves when refilling
ink tanks.
Should ink contact your skin or enter your eyes or
mouth, immediately take the following actions:
❏If fluid adheres to your skin, immediately
wash it off using large volumes of soapy
water. Consult a physician if the skin appears
irritated or is discolored.
❏If fluid enters your eyes, rinse immediately
with water. Failure to observe this
precaution could result in bloodshot eyes or
mild inflammation.
❏If swallowed, induce vomiting and consult a
physician immediately.
Note on this Guide
Meaning of Symbols
!
Warning: Warnings must be followed to
avoid serious bodily injury.
!
Caution: Cautions must be followed to
avoid damage to this product or
bodily injury.
c
Important: Important must be followed to
avoid damage to this product.
Note: Notes contain useful or
additional information on the
operation of this product.
Illustrations
The illustrations in this manual may differ slightly from
the actual objects they are intended to represent.
Operating System Versions
In this documentation, the following abbreviations are
used.
Windows refers to Windows 8, 7, Vista, XP.
❏Windows 8 refers to Windows 8, Windows 8 Pro,
and Windows 8 Enterprise.
❏Windows 7 refers to Windows 7 Home Basic,
Windows 7 Home Premium, Windows 7
Professional, and Windows 7 Ultimate.
❏Windows Vista refers to Windows Vista Home
Basic Edition, Windows Vista Home Premium
Edition, Windows Vista Business Edition,
Windows Vista Enterprise Edition, and Windows
Vista Ultimate Edition.
❏Windows XP refers to Windows XP Home Edition,
Windows XP Professional x64 Edition, and
Windows XP Professional.
SC-B6000 Series User’s Guide
Introduction
6

Printer Parts
Front section
APrinter cover
Open this cover when cleaning the printer or clearing jams.
BMaintenance box covers
Open these covers when replacing the Maintenance Box.
U“Replacing Maintenance Boxes” on page 58
CCasters
There are two casters on each leg. The casters are normally kept locked once the printer is in place.
DInk tank
Holds ink used for printing.
ESlider
U“Slider” on page 10
SC-B6000 Series User’s Guide
Introduction
7

FSide cover
Open the side cover to remove the slider for chip unit replacement. Always close the side cover securely after
inserting the slider.
GAC inlet
Connect the supplied power cable here.
HOption port
Connects the optional auto take-up reel unit.
U“Using the Auto Take-up Reel Unit (Optional)” on page 29
ILAN port
Connects the LAN cable.
JData light
The network connection status and data reception are indicated by a lit or flashing light.
On : Connected.
Flashing : Receiving data.
KStatus light
The color indicates the network transmission speed.
Red : 100Base-T
Green : 1000Base-T
LUSB port
Connect the USB cable here.
MControl panel
U“Control panel” on page 11
NAlert lamp
This lamp lights or flashes when an error occurs.
Lights or
flashes
: An error has occurred. How the lamp lights or flashesvaries with the type of error. The control panel
displays a description of the error.
Off : No error.
ORoll rest
When loading roll paper, place it on this rest and attach the roll paper adapters.
U“Loading Roll Paper” on page 21
PAdapter guides
Guides for attaching roll paper. Move the roll along these guides to attach it to the adapter holder.
U“Loading Roll Paper” on page 21
QRoll lock lever
A lever that locks roll paper in place after the roll is attached to the adapter holder.
SC-B6000 Series User’s Guide
Introduction
8

RAdapter holder
The roll paper adapter is placed in this holder after the roll paper is attached.
SPaper slot
Paper slot used when printing with roll paper.
TPrint head
Fires ink via high density nozzles while moving left and right to print.
UPaper eject guide
Guides the paper so that it is ejected smoothly.
SC-B6000 Series User’s Guide
Introduction
9

Slider
ASlider
Attach the chip unit included with the ink pack
before refilling ink.
U“Replacing and Refilling Consumables” on
page 55
BInk inlet cover
Open this cover to refill the ink tank with ink.
CChip unit
A unit that includes an IC chip.
This is included with the ink pack.
Roll paper adapter
Use the supplied roll paper adapter when loading roll
paper onto the printer.
U“Loading Roll Paper” on page 21
AAdapter lock lever
Lift to unlock, lower to lock. Unlock when attaching
roll paper to the adapter, lock once the roll is
attached.
BSize lever
Position according to the size of the roll core.
SC-B6000 Series User’s Guide
Introduction
10

Control panel
APbutton (Power button)
Turns the power on and off.
BPlight (Power light)
The printer's operational status is indicated by a lit or
flashing light.
On : The power is on.
Flashing : The printer is receiving data or
cleaning the print head or performing
other operations in the course of
being shut down.
Off : The power is off.
C(button (Load/Remove Paper button)
Pressing this button displays the Load/Remove
Paper menu. Instructions for loading or removing
the paper can be displayed by highlighting either
Remove Paper or the type of paper currently loaded
and then pressing the Zbutton. Follow the
on-screen instructions to load or remove the paper.
DScreen
Displays the printer's status, menus, error messages,
and so on. U“Screen View” on page 12
EMenu button
Displays the menu for the tab currently selected in
the display. U“Using the Control Panel Menu” on
page 40
Fybutton (Back button)
If menus are displayed, pressing this button takes
you up one level in the menu hierarchy. U“Menu
Operations” on page 40
Gl/rbuttons (Left/Right buttons)
❏Use these buttons to select tabs. The selected tab is
highlighted and the content of the info display area
updated for the selected tab.
U“Screen View” on page 12
❏If menus are displayed, these buttons can be used to
position the cursor or to delete characters when
entering text for items such as Setting Name or IP
Address.
Hu/dbuttons (Up/Down buttons)
When menus are displayed, these buttons can be
used to highlight items or options. U“Menu
Operations” on page 40
IZbutton
❏Displays the menu for the tab currently selected in the
display. (This button cannot be used to display menus
when the +is selected.)
U“Using the Control Panel Menu” on page 40
❏When menus are displayed and an item is highlighted,
pressing this button displays the sub-menu for the
highlighted item.
❏If pressed while a parameter is selected from the
Menu, the parameter is set or executed.
Jbutton
Displays the information area in the Btab.
K"button (Maintenance button)
SC-B6000 Series User’s Guide
Introduction
11

Displays the Maintenance menu, which is used for
nozzle checks and head cleaning.
U“Adjusting the Print Head” on page 52
LWbutton (Pause/Cancel button)
❏The printer enters pause status if this is pressed while
printing. To release the pause status, press the W
button again, or select Pause Cancel on the screen
and then press the Zbutton. To cancel print jobs
being processed, select Job Cancel on the screen and
then press the Zbutton.
❏Pressing this button while a menu is displayed closes
the menu and returns the printer to ready status.
M)button (Feed/Cut Media button)
❏This button is used with roll paper only.
❏It is used to manually cut roll paper using the built-in
cutter.
U“Manual cut method” on page 23
❏If printing is not currently in progress and the printer is
loaded with roll paper, you can feed paper ahead by
pressing first this button and then the dbutton. Press
the ubutton to rewind. Keep the dbutton pressed to
feed the paper up to 3 m. Keep the ubuttonpressedto
rewind the paper up to 20 cm.
When the ubutton is used to rewind roll paper, the
paper will pause when the end of the roll reaches the
starting print position. Release the button and then
press it again to resume.
Screen View
AMessage
Displays the printer's status, operation, and error
messages.
U“What to Do When a Message Is Displayed” on
page 64
BTabs/Info Display Area
The following 5 tabs are displayed in this area.
Use the l/rbuttons to select a tab.
Information on the selected tab appears in the info
display area.
,: The Print Queues Tab
This tab displays print job status and can be
used to access the Print Queues menu.
The Info Display Area
The print queues tab info display area shows
the name of the current print job.
Pressing the Zor Menu button when this tab
is selected displays the Print Queues menu.
.:ThePaperTab
This tab shows the type of paper in the printer
and can be used to access the Paper menu.
The Info Display Area
This tab displays information about the paper
that is currently loaded. When roll paper is
used, it also shows the roll width. In addition,
when On is selected for Roll Paper
Remaining, it shows the amount of roll paper
remaining. When the length remaining drops
below the value selected for Remaining Alert,
a icon appears above the tab icon and an
alert like that shown below is displayed to warn
that the printer is nearing the end of the roll.
Pressing the Zor Menu button when this tab
is selected displays the Paper menu.
U“Paper menu” on page 44
SC-B6000 Series User’s Guide
Introduction
12

:TheInkTab
This tab displays the status of the chip unit.
The Info Display Area
The display changes as follows whenever an
error is detected in an installed chip unit:
Normal Warning or Error
1 Status indicators
The chip unit status is indicated as follows.
: No error. Ready to print.
: An error occurred. Check the message
on the screen, and clear the error.
: The chip unit could not be recognized
or it is not compatible with the printer.
Or, the slider is not locked.
Check the message on the screen.
: The chip unit requires replacement.
Replace the chip unit with one from a
new ink pack.
As it gets closer to time to replace the
chip unit, a icon will begin to flash.
2Inkcolorcodes
BK : Black
Y:Yellow
M:Magenta
C:Cyan
-: The Maintenance Tab
The maintenance tab shows the status of the
Maintenance Box and is used to display the
Maintenance menu.
The Info Display Area
The maintenance tab info display area shows
Maintenance Box status and the approximate
amount of space remaining in the Mainte-
nance Box. The icons change as follows to
show errors or to warn when the Maintenance
Box is nearing the end of its service life.
Normal Warning or Error
1
1 Status indicators
Maintenance Box status is shown as follows.
: No error. The height of the
indicator corresponds to the
amount of space remaining.
: The Maintenance Box is nearing
the end of its service life.
: You need to prepare a new
Maintenance Box. Replace the
Maintenance Box with a new one.
Pressing the Zor Menu button when this tab
is selected displays the Maintenance menu.
U“Maintenance menu” on page 47
/:TheSetupTab
The setup tab displays the IP address and
menus for various settings.
The Info Display Area
The setup tab info display area shows the IP
address currently assigned, if any.
Pressing the Zor Menu button when this tab
is selected displays the Setup menu.
U“Setup menu” on page 47
SC-B6000 Series User’s Guide
Introduction
13

Features
The main features of this printer are described below.
Realizing High Productivity
High-speed printing
The speed of the print head and paper feed have been
increased for faster printing.
The printer is equipped with a high-speed rotary cutter
for quick cutting, significantly increasing productivity.
Improved operability with an easy to see and use
color screen
Designed for intuitive operation, the large, brightly-lit,
color LCD display is easy to understand and easy to use.
The large display offers detailed, easy-to-understand
error messages and illustrated guides to loading paper.
U“Screen View” on page 12
Checking current operating status even from afar
thanks to an alert lamp
Errors are immediately obvious even at a distance,
thanks to the large, highly visible alert lamp. This helps
prevent any wasted time when printing has stopped due
to running out of ink or paper.
High-capacity ink tank included
The printer includes a high-capacity ink tank for high
productivity. We also offer 1000 ml high-capacity ink
packs for ink refill. This eliminates the need for frequent
troublesome ink cartridge replacements.
Insistence on Ease-of-Use
Spindle-free roll paper adapter makes loading roll
paper a snap
The lack of a spindle makes it possible to load and
remove roll paper even in environments where space is
at a premium.
To load roll paper, simply place it on the roll rest and
attach roll paper adapters to both ends. The roll rest is
low, making it easy even for short workers to load paper.
U“Loading Roll Paper” on page 21
Easy maintenance
Roll paper and all replacements, including ink refills,
Maintenance Boxes, and cutters, are installed from the
front, allowing the printer to be placed against a wall.
The printer does not have to be moved to allow rear
access.
SC-B6000 Series User’s Guide
Introduction
14

Notes on Usage and
Storage
Installation space
Make sure that you secure the following space, clear of
any other objects, so that paper ejection and
consumable replacement are not obstructed.
See the "Specifications Table" for the external
dimensions of the printer.
U“Specifications Table” on page 75
Notes when using the printer
Note the following points when using this printer to
avoid breakdowns, malfunctions, and print quality
decline.
❏When using the printer, observe the operating
temperature and humidity range described in the
"Specifications Table". U“Specifications Table”
on page 75
Even when the conditions above are met, you may
not be able to print properly if the environmental
conditions are not suitable for the paper. Be sure to
use the printer in an environment where the paper's
requirements are met. For more details, see the
documentation supplied with the paper.
Also, when operating in dry areas, air conditioned
environment, or under direct sunlight, maintain
the appropriate humidity.
❏Do not install the printer next to heat sources or
directly in the path of air from a ventilator or air
conditioner. Failure to observe this precaution
could result in the print head nozzles drying and
clogging.
❏The print head may not be capped (i.e., may not
move to the right-hand side) if an error occurs and
the printer is turned off without first resolving the
error. Capping is a function for automatically
covering the print head with a cap (lid) to prevent
the print head from drying out. In this case, turn on
the power and wait a while until capping is
performed automatically.
❏When the power is on, do not remove the power
plug or cut the power at the breaker. The print head
may not be capped properly. In this case, turn on the
power and wait a while until capping is performed
automatically.
❏Even when the printer is not in use, some ink will be
consumed by head cleaning and other maintenance
operations needed to keep the print head in good
condition.
Notes when not using the printer
If you are not using it, note the following points when
storing the printer. If it is not stored correctly, you may
not be able to print properly the next time it is used.
❏If you do not print for a long time, the print head
nozzles may become clogged. Turn the printer on at
least once every two weeks to prevent the print head
clogging.
When the printer is turned on, head cleaning is
performed automatically. Do not turn the printer
off until cleaning is complete.
Leaving the printer for too long without turning it
on may result in a malfunction. Repair work for
such malfunction will be charged.
❏If you will not be using the printer for more than 2
weeks, maintenance must be performed by a service
engineer before and after this period. This
maintenance work will be charged.
Note that even if proper maintenance has been
done before leaving the printer for a long time,
repair may be necessary when doing maintenance
for reusing the printer, depending on the period
SC-B6000 Series User’s Guide
Introduction
15

and conditions of storage. In such a case, the repair
work will also be charged.
Contact your dealer or Epson Support.
❏The roller may leave an impression on paper that is
left in the printer. This can also cause wavy or curled
paper resulting in paper feeding problems or the
print head could be scratched. Remove any paper
when storing.
❏Store the printer after confirming that the print
head has been capped (the print head is positioned
at the far right). If the print head is left uncapped for
a long time, the print quality may decline.
Note:
If the print head is not capped, turn the printer on, and
then turn it off.
❏To prevent the accumulation of dust and other
foreign matter in the printer, close all covers before
placing it in storage.
If the printer will be not be used for an extended
period, protect it with an anti-static cloth or other
cover.
The print head nozzles are very small, and they can
become clogged easily if fine dust gets on the print
head, and you may not be able to print properly.
❏When turned on after an extended period of disuse,
the printer may automatically perform head
cleaning to ensure print quality.
Head cleaning will end after about 10 to 15 minutes.
Notes on Handling Ink Packs and
Ink Tanks
Note the following points when handling ink packs and
ink tanks.
❏Do not remove the ink tanks.
Ink tanks are calibrated when installed. Removing
them can harm quality and functionality.
❏Store ink packs at room temperature out of direct
sunlight.
❏To ensure print quality, use all the ink in ink packs
before the date printed on them.
❏If the ink pack has been stored in a cold location for
a long period of time, keep at room temperature for
at least 4 hours before using.
❏When refilling the ink in an ink tank, be sure to use
all the ink in the ink pack at once.
❏Refill the ink tank as soon as possible after opening
the ink pack.
❏Do not place any objects on top of the ink tank.
Notes on handling paper
Note the following points when handling and storing
the paper. If the paper is not in good condition, print
quality may decline.
Check the documentation supplied with each paper.
Notes on Handling
❏Do not fold the paper or scratch the surface of the
paper.
❏Avoid touching the printable surface of the paper
with your bare hands. Moisture and oils from your
hands can affect print quality.
❏Handle paper by the edges. We recommend
wearing cotton gloves.
❏Do not wet the paper.
❏Do not throw away the paper packaging as you can
use it for storing the paper.
❏Avoid locations that are subject to direct sunlight,
excessive heat, or humidity.
❏Remove roll paper that is not in use from the
printer. Rewind it correctly and then store it in the
original packaging that came with the roll paper. If
you leave the roll paper in the printer for a long
time, its quality may decline.
Notes on handling printed paper
To maintain long lasting, high quality print results, note
the following points.
SC-B6000 Series User’s Guide
Introduction
16

❏Do not rub or scratch the printed surface. If they are
rubbed or scratched, the ink may peel off.
❏Do not touch the printed surface; Failure to observe
this precaution may cause ink to rub off.
❏Make sure the print outs are completely dry before
folding of stacking; otherwise, the color may change
where they touch (leaves a mark). These marks will
disappear if they are separated immediately and
dried; however, they will remain if not separated.
❏If you put the print outs in an album before they are
completely dry, they may be blurred.
❏Do not use a dryer to dry the print outs.
❏Avoid direct sunlight.
❏Prevent color distortion while displaying or storing
the print outs by following the instructions in the
paper's documentation.
Note:
Typically, print outs and photos fade over time (color
distortion) due to the effects of light and various
constituents in the air. But, if care is taken in how these
items are stored, you can help reduce discoloration.
The colors of photos, posters, and other printed materials
appear different under different lighting conditions (light
sources
*
). The colors of print outs from this printer may
also appear different under different light sources.
* Light sources include sunlight, fluorescent light,
incandescent light, and other types.
SC-B6000 Series User’s Guide
Introduction
17

Introducing the Supplied Software
Contents of the Software Disc
The supplied Software Disc contains the following software. Install as required.
More information be found in the Network Guide (pdf) or via online help for the application in question.
Note:
❏The included software disc does not contain any printer drivers. A software RIP is required to print.
❏Download the latest version of the software from EPSON's website.
Software Name Overview
Epson Driver and Utilities Installs the EPSON communications driver (EPSON SC-B6000 Series Comm Driver).
The Epson communications driver is required if the EPSON LFP Remote Panel 2 is to be
used to copy paper settings. It is not a printer driver. In addition, the software RIP may not
display printer status if the Epson communications driver is not installed when the printer
is connected to a computer via USB. See the software RIP documentation for more
information on the status display.
EPSON LFP Remote Panel 2 EPSON LFP Remote Panel 2 is used to update firmware from a computer and copy paper
settings bank created in the printer’s setup menu to a computer.
U“Starting EPSON LFP Remote Panel 2” on page 19
U“Exiting EPSON LFP Remote Panel 2” on page 19
Epson Network Utilities Select this option during installation if the printer and computer are connected via a
network. Installing this utility allows a wizard to be used to simplify the process of setting
the addresses needed for network connections.
EpsonNet Config With this software, you can configure various network settings for the printer from your
computer. This is useful asit allows you to enter addresses and names using the keyboard.
The documentation is installed with the application.
SC-B6000 Series User’s Guide
Introduction
18

Starting EPSON LFP Remote
Panel 2
Launch EPSON LFP Remote Panel 2 after confirming
that the printer displays Ready.
A
The application can be launched using either of
the following two methods.
❏Double-click the EPSON LFP Remote Panel 2 icon
on the desktop. The EPSON LFP Remote Panel 2
icon is created when the application is installed.
❏Click Start > All Programs (or Programs) > EPSON
LFP Remote Panel 2 > EPSON LFP Remote Panel
2.
B
Click the desired item in the EPSON LFP Remote
Panel 2 main window.
See EPSON LFP Remote Panel 2 help for more
information.
ExitingEPSONLFP RemotePanel
2
Click Exit in the EPSON LFP Remote Panel 2 main
window.
Uninstalling Software
To remove the EPSON LFP Remote Panel 2 or EPSON
communications driver, follow the procedure below.
c
Important:
❏You must log in with an Administrators group.
❏Enter the Administrator password when
prompted and then proceed with the
remainder of the operation.
❏Exit any other applications that may be
running.
A
Turn off the printer, and unplug the interface
cable.
B
Go to the Control Panel and click Uninstall a
program from the Programs category.
C
Select the software you want to remove and then
click Uninstall/Change (or Change/Remove or
Add/Remove).
Selecting the following deletes the Epson
communications drivers.
EPSON SC-B6000 Series Comm Driver Printer
Uninstall
Select EPSON LFP Remote Panel 2 to remove
EPSON LFP Remote Panel 2.
SC-B6000 Series User’s Guide
Introduction
19

D
Select the target printer icon, and then click OK.
E
Follow the on-screen instructions to continue.
When the delete confirmation message appears,
click Yes.
Restart the computer if you are reinstalling the EPSON
communications driver.
SC-B6000 Series User’s Guide
Introduction
20