Epson SC-V7000 Installation guide

Epson®SureColor®V7000 Installation and
Training Checklist
Please check off each task when completed.
Installation Tasks
Completed
Pre-installation Site survey has been completed and signed by Epson
representative and End user
Unboxing and set up of the printer will be completed by Epson team
member. (Unboxing and installation will take 4 business days)
Hardware installation consists of:
-Unboxing ofthe main unit
-Leveling the main unit at its permanent location
-Removing all shipping brackets
-Installing the print heads (Separate box:SC-V7000 Print head
Kit)
-Installation ofUVLED Chiller
-Confirm adequate print room ventilation
Once Printer hardware is assembled, a certified electrician will need to
be provided to connect the power from the building to the printer
Ink initialization and filling the chiller with coolant (2 bottles of White
Ink and Varnish are recommended during ink initialization)
The Windows PC provided by the customer will be installed and
prepared for software installation (2 PC’s are recommended for the
installation; one will be used to run UV Controller and the other is to
run your Windows RIP software
Epson team member will install the printer drivers, Epson Edge Print
RIP software and UV Controller on the provided PC’s
To download drivers please visit the SureColor V7000 Support Page.
Follow this checklist to ensure proper installation of the Epson SureColor V7000 printer
Please read the documentation provided with the SureColor printer

After printer initialization, Epson team member will ensure all nozzles
are firing and will provide customer a copy of the nozzle test
Epson team member will conduct all necessary printing alignments
Epson team member will print a test file to ensure the quality test
meets Epson standards and will provide the printed sample and a
reference sample to the customer
Hardware Training Tasks
Completed
Epson team member will conduct the following hardware training/
operation training/safety training
Hardware / Operation Training consists of:
- Understanding safety features
- Proper maintenance of the printer
- How to replace ink (see below for required PPE and safe handling
of ink)
- Media thickness check
- Alignment pin operation
- Media Thickness (Z axis check)
- Turn off/on vacuum zones
- Replace waste ink bottle
- Properly turn off/on the SC-V7000
Maintenance PPE Requirements and Ink Handling Training
Completed
Confirm training on proper use of PPE and ink handling. Under
practiced maintenance conditions, some ink splashes and ink aerosol
conditions can occur, and maintenance technicians should be prepared
with proper PPE:
- Gloves - Ansell Edmont Neoprene 865, Solvex Nitrile Rubber
number 275, or equivalent gloves.
- Face mask - N95 style face mask with charcoal linings to cover
mouth, nose, and lower jaw.
- Eye protection - Sufficient to protect eyes from ink splash and
aerosols. Full coverage goggles or similar.
- Protective clothing - Sufficient to protect skin from ink splash and
aerosols.

Epson Cloud Solution PORT Tasks (Reference: ECSP Guide)
Completed
Navigate to the ECSP website https://port.epson.com/eai and have
customer accept the Terms & Conditions and Privacy Statement
Sign up for an account (Global ID)
Activate account and record “organization ID”
Register the printer on the ECSP site and receive Agent Key
Install all necessary software
Connect the printer to the Customer’s Epson Cloud Solution PORT
account
Confirm communication to the Epson Cloud Solution PORT
Tour the ECSP Dashboard
Software Training Tasks
Completed
Epson team member will conduct software training.
Ensure complete understanding of UV Controller:
-Media Thickness (Z axis check)
-X,Y start position
-Cleaning functions
-Layered Prints
-Understanding of error logs
-Basic end-user troubleshooting
Epson Edge Print Training (Reference: Epson Edge Print Resource
Guide)
Completed
Install Epson Edge Print using “Main Installer” file
Install V7000 Edge Print Printer installer “EEP_SCV7000_verX.X.X.exe”
Launch Epson Edge Print and authenticate with software license
Connect toSC-V7000 using USB 3.0 orTCPIP connection
Load image to be printed
Set preferred print settings (Basic or Advanced)
Set preferred Color Management settings
RIP and print loaded image

Tour Quick Set & Hot Folder features
Ensure complete understanding of Epson Edge Print:
- Import File
- Choosing the correct media/resolution
- Multi-layer Printing (white and Varnish printing)
- Color replacement
- Mirror images
- Uni-directional printing and bi-directional printing Media
positioning
Additional Support Information
Completed
Provided technical support number: [phone]

Customer Acceptance Sign-off*
Customer Name (Printed)
Customer Signature
Date
*By signing, customer confirms that the above steps have been completed.
Installer Name (Printed)
Installer Signature
Date
Complete the Customer Installation Form
Dealer and Epson Technician
Completed
Fill out form and submit to https://profocus.epson.com
6/13/2021 Rev. 3