Epson EH-TW5650 User manual

User's Guide

Organization of the Guide and Notations in the Guide
1
Using Each Guide
The guides for this projector are organized as shown below.
Safety Instructions/Support and Service Guide
Contains information on using the projector safely, as well as a support and service guide,
troubleshooting check lists, and so on. Make sure you read this guide before using the pro-
jector.
User's Guide (this guide)
Contains information on setting up and basic operations before using the projector, using
the Configuration menu, and handling problems and performing routine maintenance.
Quick Start Guide
Contains information on the procedures for setting up the projector. Read this first.

Organization of the Guide and Notations in the Guide
2
Notations Used in This Guide
Safety Indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
The following shows the symbols and their meanings. Please understand and respect these caution symbols
in order to avoid injury to persons or property.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death
due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical
damage due to incorrect handling.
General Information Indications
Attention
Indicates procedures which may result in damage or malfunctions to occur.
c
Indicates additional information and points which may be useful to know regarding a topic.
sIndicates a page where detailed information regarding a topic can be found.
Menu Name Indicates Configuration menu items.
Example: Image - Color Mode
Button Name Indicates the buttons on the remote control or the control panel.
Example: button
About the Use of "This Product" or "This Projector"
As well as the main projector unit, supplied items or optional extras may be referred to using the phrase "this
product" or "this projector".

Contents
3
Organization of the Guide and
Notations in the Guide
UsingEachGuide ..................... 1
NotationsUsedinThisGuide ........... 2
SafetyIndications .......................2
GeneralInformationIndications.............2
AbouttheUse of "ThisProduct"or "This Projector"
..................................... 2
Introduction
PartNamesandFunctions ............. 6
Front/Top ............................. 6
ControlPanel.......................... 7
RemoteControl ......................... 9
Rear ................................ 11
Base ................................ 12
Preparing
Installing ............................ 13
ProjectedImageandPositionofProjector.....13
Installinginparallelwiththescreen ........ 13
Installing the projector horizontally by
adjustingtheheightofeitherside ......... 13
VariousSettingMethods .................14
Placingonatableandprojecting.........14
Suspending from the ceiling and projecting
.................................. 15
ProjectionDistance ..................... 15
ConnectingaDevice ................. 18
ConnectingVideoEquipment .............. 18
ConnectingaComputer .................. 18
ConnectingSmartphonesorTablets.........18
ConnectingUSBDevices .................. 19
ConnectingExternalSpeakers .............. 19
Connecting Bluetooth
®
devices............20
PreparingtheRemoteControl ........ 23
InstallingtheRemoteControlBatteries.......23
RemoteControlOperatingRange ...........24
Operatingrange(lefttoright) ............ 24
Operatingrange(toptobottom) .......... 24
Basic Operations
Projecting Images ................... 25
TurningOntheProjector .................25
If the target image is not projected . . . . . . . . 26
UsingtheHomeScreen .................. 26
TurningOff ........................... 27
Adjusting the Projected Image . . . . . . . . 28
DisplayingtheTestPattern ................ 28
AdjustingtheFocus ..................... 28
AdjustingtheProjectionSize..............28
AdjusttheHeightoftheImage ............. 29
AdjustingtheProjector'sTilt ............... 29
Adjusting the Position of the Image (Lens Shift)
(EH-TW5650/EH-TW5600only).............29
CorrectingDistortion .................... 30
Correct automatically (Auto V-Keystone)
(EH-TW5650/EH-TW5600only)...........30
Correct manually (H-Keystone adjuster) . . . . . 31
Correctmanually(H/V-Keystone) .......... 31
Correctmanually(QuickCorner)..........32
AdjustingtheVolume .................... 33
Hiding the Image and Muting the Audio
Temporarily(A/VMute) ................... 33
Adjusting the Image
AdjustingtheImage ................. 34
Selecting the Projection Quality (Color Mode)
.................................... 34
Switching the Screen Between Full and Zoom
(Aspect) .............................35
AdjustingtheSharpness .................. 35
Adjusting Image Resolution (Image
Enhancement) ......................... 35
SettingAutoIris ........................ 36
SettingFrameInterpolation ...............36
AdjustingtheColor .................. 38
AdjustingtheColorTemp. ................38
AdjustingtheRGB(OffsetandGain).........38
Adjusting Hue, Saturation, and Brightness . . . . . 38
AdjustingtheGamma ...................39
Selectandadjustthecorrectionvalue......39

Contents
4
Adjust using the gamma adjustment graph
.................................. 40
Viewing the Image at the Saved Image
Quality (Memory Function) . . . . . . . . . . . 41
SavingaMemory ....................... 41
Loading, Deleting, and Renaming a Memory
.................................... 41
Useful Functions
Enjoying3DImages .................. 43
PreparingtoView3DImages.............. 43
Ifthe3Dimagecannotbeviewed .........43
Using3DGlasses ....................... 44
Chargingthe3DGlasses ................ 44
Pairing3DGlasses .................... 45
Wearing3DGlasses ................... 45
Reading the indicator on the 3D Glasses . . . . 45
Converting2DImagesto3D ............... 46
WarningsRegardingViewing3DImages......47
UsingtheHDMILinkFunction ........ 49
HDMILinkFunction ..................... 49
HDMILinkSettings ...................... 49
Connecting ........................... 50
Playing Back Image Data (Slideshow)
...................................... 51
CompatibleData ....................... 51
PlayingaSlideshow ..................... 51
SettingsforSlideshow ................... 52
ProjectingTwoImagesSimultaneously
(Split Screen) (EH-TW5650 Only) . . . . . . 53
ProjectinginSplitScreen .................53
ChangingtheSplitScreenSettings..........53
ExitingSplitScreen .....................53
Using the Projector on a Network
(EH-TW5650 Only)
ProjectingUsingWirelessLAN ........ 54
Selecting Network Settings for the Projector
.................................... 54
Selecting the Computer's Wireless LAN Settings
.................................... 56
Selecting wireless network settings in
Windows ........................... 56
Selecting wireless network settings in Mac
.................................. 56
Setting Up Wireless Network Security . . . . . . . . 57
Connecting a Mobile Device Using a QR Code
.................................... 57
ProjectinginScreenMirroring ........ 59
SelectingScreenMirroringSettings .......... 59
ProjectinginWindows10 ................. 60
ProjectinginWindows8.1................61
ProjectingUsingtheMiracastFunction.......63
Configuration Menu
ConfigurationMenuFunctions ........ 64
ConfigurationMenuOperations ............ 64
ConfigurationMenuTable ................65
Imagemenu ........................ 65
Signalmenu ........................ 66
Settingsmenu ....................... 68
Extendedmenu ...................... 71
Networkmenu(EH-TW5650only)......... 72
Infomenu .......................... 76
Resetmenu ......................... 76
Troubleshooting
Problem Solving . .................... 77
ReadingtheIndicators ................... 77
Indicatorstatusduringanerror/warning....77
Indicator status during normal operation . . . . 79
Wireless LAN indicator and status (EH-
TW5650only).......................79
WhentheIndicatorsProvideNoHelp........80
Checktheproblem .................... 80
Problemsrelatingtoimages .............81
Problemswhenprojectionstarts .......... 84
Problemswiththeremotecontrol ......... 84
Problemswith3D ....................84
ProblemswithHDMI .................. 85
Networkproblems .................... 86
Bluetoothdeviceproblems .............. 87

Contents
5
Otherproblems ...................... 88
AboutEventID ........................ 89
Maintenance
Maintenance ........................ 91
CleaningtheParts ...................... 91
Cleaningtheairfilter .................. 91
Cleaningthemainunit ................. 92
Cleaningthelens ..................... 93
Cleaningthe3DGlasses ................ 93
ReplacementPeriodsforConsumables.......93
Airfilterreplacementperiod ............. 93
Lampreplacementperiod..............93
ReplacingConsumables .................. 94
Replacingtheairfilter ................. 94
Replacingthelamp ................... 95
Resettinglamphours .................. 96
Appendix
Optional Accessories and
Consumables ........................ 98
OptionalItems ......................... 98
Consumables .......................... 98
SupportedResolutions ............... 99
ComputerSignals(AnalogRGB)............99
HDMI1/HDMI2InputSignal ................ 99
MHLInputSignal ....................... 99
3DInputSignalHDMI ................... 100
3DInputSignalMHL .................... 100
Specifications ...................... 101
Appearance ........................ 103
ListofSafetySymbols ............... 104
Glossary ........................... 106
GeneralNotes ...................... 107
GeneralNotice ........................ 108

Introduction
6
Part Names and Functions
Front/Top
Name Function
aLamp cover
Open when replacing the projector's lamp. sp.95
bA/V mute slide lever
Slide the knob to open and close the lens cover.
Close during projection to delete audio and video. sp.33
cAir exhaust vent
Exhaust vent for air used to cool the projector internally.
Warning
Do not look into the air exhaust vent. If the lamp explodes, scattered
small shards of glass and released gas may cause an injury. If any glass
gets into your eyes or mouth, contact your local physicians immediately.
Caution
While projecting, do not put your face or hands near the air exhaust vent,
and do not place objects that may become warped or damaged by heat
near the vent. Hot air from the air exhaust vent could cause burns, warp-
ing, or accidents to occur.
dLens cover
Close when not using the projector to protect the lens from being scratched
or soiled. sp.27
eFoot release lever
Press the foot release lever to extend and retract the front adjustable foot.
sp.29
fLens
Images are projected from here.
gRemote receiver
Receives signals from the remote control. sp.24
hAir intake vent
Intake vent for air used to cool the projector internally.

Introduction
7
Name Function
iAir filter cover
When replacing the air filter, open this cover and remove the air filter. sp.94
jFocus adjuster (EH-
TW5650/EH-TW5600)
Focus ring (EH-TW5400)
Adjusts the image focus. sp.28
kZoom adjuster (EH-
TW5650/EH-TW5600)
Zoom ring (EH-TW5400)
Adjusts the image size. sp.28
lLens shift dial (EH-
TW5650/EH-TW5600
only)
Moves the position of the image vertically. sp.29
mHorizontal keystone ad-
juster
Performs horizontal keystone correction. sp.31
nControl panel
Operates the projector. sp.7
Control Panel
Buttons/Indicators Function
a
Turns the projector on or off. sp.25
Shows the projector's status through a combination of other indicators lit and
flashing. sp.79
b
Operation indicator
Flashes blue to indicate the projector is warming up or cooling down. Shows
the projector's status through a combination of other indicators lit and flashing.
sp.77
c
Shows the access status to the wireless LAN by lighting or flashing. sp.79
EH-TW5600/EH-TW5400 do not light or flash.
d
Flashes orange when it is time to replace the lamp. Shows the projector's errors
through a combination of other indicators lit and flashing. sp.77

Introduction
8
Buttons/Indicators Function
e
Flashes orange if the internal temperature is too high. Shows the projector's
errors through a combination of other indicators lit and flashing. sp.77
f
Switches to the image from each input port. sp.26
g
•
Adjusts the volume. sp.33
You cannot control the volume for Bluetooth audio devices.
•
Selects menu items or adjustment values while displaying the projector's menu.
•
Performs horizontal keystone correction when the Keystone screen is displayed.
sp.31
h
•
Adjusts keystone distortion in projected images. sp.31
•
Selects menu items or adjustment values while displaying the projector's menu.
i
Return to the previous menu level when a menu is displayed. sp.64
j
Selects functions and settings when a menu is displayed. sp.64
k
Displays and closes the Configuration menu.
On the Configuration menu, you can make adjustments and settings for Sig-
nal, Image, Input Signal, and so on. sp.64
l
Displays and closes the Home screen. sp.26

Introduction
9
Remote Control
Button Function
a
Turns the projector on or off. sp.25
b
Switches to the image from each input port.
sp.26
If you press the button when using EH-
TW5650, the source switches between LAN and
Screen Mirroring.
c
•
When HDMI Link is On
Displays the device connections list.
Press other buttons to control playback, stop, or
adjust the volume of connected devices com-
patible with the HDMI CEC or MHL standards.
sp.49
•
When HDMI Link is Off
Displays the HDMI Link settings menu.
d
Displays and closes the Configuration menu.
On the Configuration menu, you can make ad-
justments and settings for Signal, Image, Input
Signal, and so on. sp.64
e
Selects menu items and adjustment values.
sp.64
f
Performs the function assigned to the User But-
ton. sp.68
g
Changes the Color Mode. sp.34
h
Changes the 3D Display to Auto, 3D, or 2D.
sp.46
i
Changes the 3D format. sp.43
j
Sets the Auto Iris. sp.36
k
Displays the Image Enhancement menu.
sp.35
l
Displays and closes the test pattern. sp.28
m
Displays and closes the Home screen. sp.26

Introduction
10
Button Function
n
Turns the video and audio on or off. sp.33
o
Sets the strength for Frame Interpolation.
sp.36
p
Registers and loads a memory. sp.41
q
The adjustment value returns to its default value
when pressed while the menu's adjustment
screen is displayed. sp.64
r
When a menu is displayed, it accepts and enters
the current selection and moves to the next lev-
el. sp.64
s
Returnsto the previous menulevel when a menu
is displayed. sp.64
t
Adjusts the volume. sp.33
You cannot control the volume for Bluetooth
audio devices.
A
Temporarily mutes or plays the audio. sp.33

Introduction
11
Rear
Name Function
aPower inlet
Connect the power cord. sp.25
bSpeaker
The projector's built-in speaker. Outputs audio.
cRemote receiver
Receives signals from the remote control. sp.24
dAudio Out port
Outputs audio during playback to the external speakers. sp.19
eHDMI2 port
Connects HDMI compatible video equipment and computers. sp.18
fHDMI1/MHL port
Connects HDMI compatible video equipment and computers. sp.18
Also, connects MHL compatible smartphones and tablets. sp.18
gPC port
Connects to the RGB output port on a computer. sp.18
hService port
Service port. This is not normally used.
iUSB port
Connects USB devices such as a USB memory device or a digital camera, and
projects images as a slideshow. sp.18

Introduction
12
Base
Name Function
aCeiling mount fixing
points (three points)
Attaches the optional ceiling mount here when suspending the projector from a
ceiling. sp.98
bSecurity cable fitting
Thread a commercially available theft-prevention wire lock through this opening
to secure and lock the projector.
cRear foot
When set up on a surface such as a table, extend the foot to adjust horizontal tilt.
sp.29
dFront adjustable foot
When set up on a surface such as a table, extend the foot to adjust the height of
the image. sp.29

Preparing
13
Installing
Projected Image and Position of Projector
Install the projector as follows.
Installing in parallel with the screen
If the projector is installed at an angle to the screen, keystone distortion occurs in the projected image.
Adjust the projector's position so that it is installed in parallel with the screen.
c
If the projector cannot be installed in parallel, use one of the following methods to adjust the
projected image.
•Correct distortion in the image using the horizontal keystone adjuster or H/V-Keystone sp.30
•Adjust the position of the projected image using lens shift sp.29
Installing the projector horizontally by adjusting the height of either side
If the projector is tilted, the projected image is also tilted.
Install the projector horizontally so that both sides are at the same height.
If the projector cannot be installed horizontally, you can adjust the projector's tilt with the rear foot.
s p.29

Preparing
14
Various Setting Methods
Warning
•A special method of installation is required when suspending the projector from a ceiling (ceiling mount). If
it is not installed correctly, it could fall causing an accident and injury.
•If you use adhesives, lubricants, or oil on the ceiling mount fixing points to prevent screws from loosening,
or if you use things such as lubricants or oils on the projector, the projector case may crack causing it to fall
from its ceiling mount. This could cause serious injury to anyone under the projector and also damage the
projector.
•Do not install it on an unstable shelf or in a place out of load range. Otherwise, it could fall or topple causing
an accident and injury.
•When installing it in a high position such as on a shelf, take measures against falling by using wires to ensure
the safety in an emergency, such as an earthquake, and prevent accidents. If it is not installed correctly, it
could fall causing an accident and injury.
•Do not block the air intake vent and air exhaust vent of the projector. Blocking its air intake vent and air
exhaust vent may trap heat inside causing fire.
Attention
•Try not to setup the projector in locations subject to high humidity and dust, or in locations subject to smoke
from fires or tobacco smoke.
•Do not use the projector installed vertically. Doing so could cause a malfunction.
•Clean the air filter once every three months. Clean it more often if the environment is particularly dusty.
sp.91
Placing on a table and projecting
You can install the projector on a table in your living room or on a low shelf to project images.

Preparing
15
Suspending from the ceiling and projecting
You can suspend the projector from the ceiling with the optional ceiling mount to project images.
c
When suspending from the ceiling and projecting, set Projection to Front/Ceiling or Rear/
Ceiling.
s Extended - Projection p.71
Projection Distance
The size of the projection increases as the projector is moved away from the screen.
Use the table below to setup the projector at the optimum position from the screen. The values given here
are for your reference only.
The maximum lens shift adjustment values are shown in the following table.
c
The projected image becomes smaller after correcting distortion. Increase the projection distance
to fit the projected image to the screen size.
A : Projection distance from the projector to the screen
B : Height from the center of the lens to the bottom edge of the projected image
C : The center of the lens

Preparing
16
EH-TW5650/EH-TW5600
Unit: cm
16:9 Screen Size A B
Minimum (Wide) to Maximum
(Tele)
Vertical Lens Shift Highest to
Lowest
60" 133 x 75 176 to 286 -4 to +7
80" 177 x 100 235 to 382 -5 to +10
100" 221 x 125 295 to 478 -6 to +12
150" 332 x 187 443 to 719 -9 to +19
200" 443 x 249 591 to 959 -12 to +25
250" 553 x 311 740 to 1200 -16 to +31
300" 664 x 374 888 to 1441 -19 to +37
EH-TW5400
Unit: cm
16:9 Screen Size A B*
Minimum (Wide) to Maximum
(Tele)
60" 133 x 75 162 to 195 -7
80" 177 x 100 217 to 261 -9
100" 221 x 125 272 to 327 -11
150" 332 x 187 410 to 492 -17
200" 443 x 249 547 to 658 -23
250" 553 x 311 685 to 823 -28
332" 735 x 413 911 to 1094 -38
* Lens shift is not supported.

Preparing
17
Installation example for EH-TW5650/EH-TW5600 (with 16:9 screen size and 100")
Side view
Overhead view

Preparing
18
Connecting a Device
Attention
•Make cable connections before connecting to a power outlet.
•Check the shape of the cable's connector and the shape of the port, and connect. If you force a connector of
a different shape into the port, it could cause damage and a malfunction to occur.
Connecting Video Equipment
To project images from DVD players and so on, connect to the projector using one of the following methods.
c
•Some types of video equipment are capable of outputting different types of signals. Check the user's
guide supplied with the video equipment to confirm what type of signals can be output.
•If audio is not output correctly, check the settings in Audio Out Device. sSettings - HDMI Link -
Audio Out Device p.68
Connecting a Computer
To project images from a computer, connect the computer using one of the following methods.
When using a commercially available computer cable
When using a commercially available HDMI cable
Connecting Smartphones or Tablets
You can connect MHL compatible smartphones or tablets.
Use a commercially available MHL cable to connect the micro USB port of smartphones and tablets to the
HDMI1/MHL port on the projector.

Preparing
19
The connected smartphone or tablet begins charging when images are projected.
Attention
•Be sure to use an MHL compatible cable for making connections. If a cable that does not meet the MHL
standards is connected, the smartphone or tablet couldgenerate heat, cause a liquid leak, explode or generate
other conditions that could result in a fire.
•If you connect using a commercially available MHL-HDMI conversion adapter, charging the smartphone or
tablet may not work or you may not be able to perform operations using the projector's remote control.
c
•When using a lot of power, such as when playing a movie, you may not be able to charge.
•This projector will not charge devices in standby mode or when the battery in a smartphone or tablet
is depleted.
Connecting USB Devices
You can connect USB devices such as USB memories, and USB compatible digital cameras.
Using the USB cable supplied with the USB device, connect the USB device to the USB (TypeA) port on the
projector.
When the USB device is connected, you can project image files on the USB memory or digital camera as a
slideshow.
s p.51
When you have finished projecting, remove USB devices from the projector. For devices with a power switch,
make sure you turn them off before disconnecting the USB device.
Attention
•If you use a USB hub, the connection may not operate correctly. Devices such as digital cameras and USB
devices should be connected to the projector directly.
•Connect a digital camera using a USB cable specified for use with the device.
•Use a USB cable less than 3 m in length. If the cable exceeds 3 m, slideshows may not function correctly.
Connecting External Speakers
To output audio from external speakers, connect the speakers to the projector's Audio Out port with a
commercially available audio cable.