Epson MeetingMate EB-1410Wi User manual

User’s Guide

Notations Used in This Guide
•Safety indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
The indications and their meaning are as follows. Make sure you understand them properly before reading the guide.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
•General information indications
Attention
Indicates procedures which may result in damage or injury if sufficient care is not taken.
a
Indicates additional information and points which may be useful to know regarding a topic.
sIndicates a page where detailed information regarding a topic can be found.
g Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the "Glossary"
section of the "Appendices".
s"Glossary" p.209
[Name] Indicates the name of the buttons on the remote control or the control panel.
Example: [Esc] button
Menu Name Indicates Configuration menu items.
Example:
Select Brightness from Image.
Image - Brightness

Notations Used in This Guide ........................ 2
Introduction
ProjectorFeatures .......................................... 9
InteractiveFunction(EasyInteractiveFunction) ..........................9
EasilyPerformOperationsfromtheControlPad ..........................9
Connecting to a Network and Projecting Images from the Computer's Screen . . . . . 9
ProjectTwoImagesSimultaneously(SplitScreen)........................9
PartNamesandFunctions .................................. 10
Front/Top ...................................................10
Side .......................................................11
Interface ...................................................12
Base......................................................13
Attachingthefeet(Onlymodelswithfeetsupplied)....................14
ControlPanel................................................15
RemoteControl ...............................................16
Replacingtheremotecontrolbatteries............................. 19
Remotecontroloperatingrange.................................20
EasyInteractivePen............................................20
ReplacingthebatteryfortheEasyInteractivePen.....................21
ReplacingthetipoftheEasyInteractivePen.........................22
PenTray....................................................22
ControlPad.................................................23
ReplacingthebatteriesfortheControlPad..........................24
Preparing the Projector
Installing the Projector ..................................... 27
InstallationMethods ...........................................27
Connecting Equipment ..................................... 29
ConnectingtotheProjector......................................31
Connectingacomputer.......................................31
Connectingimagesources.....................................33
ConnectingUSBdevices ....................................... 35
Connectingexternalequipment.................................37
ConnectingaLANcable .......................................39
InstallingthewirelessLANunit ..................................40
ConnectingtotheControlPad....................................41
ConnectingwhenusingthePCInteractivefunction....................41
ConnectingusingUSBDisplay...................................42
ConnectingusingPCFree ......................................43
Connectingaprinter.........................................44
Basic Projection Methods
Projectingimages ......................................... 46
FromInstallationtoProjection.....................................46
Automatically Detect Input Signals and Change the Projected Image (Source Search)
..........................................................47
ProjectingwithUSBDisplay......................................48
Necessarysettings ...........................................48
Systemrequirements .........................................48
Connectingforthefirsttime ....................................49
Uninstalling ...............................................50
AdjustingProjectedImages ................................ 51
CorrectingKeystoneDistortion .................................... 51
H/V-Keystone..............................................51
QuickCorner ...............................................52
AdjustingtheImageSize ........................................54
AdjustingthePositionoftheImage(ImageShift)........................ 54
Adjusting the Vertical Position of the Image (Models Supplied with the Feet Only)
..........................................................55
Raisingtheheightoftheimage ..................................55
Loweringtheheightoftheimage ................................56
Adjusting the Horizontal Position of the Image (Models Supplied with the Feet Only)
..........................................................56
CorrectingtheFocus...........................................56
AdjustingtheVolume..........................................56
Contents
3

AdjustingtheImage ...........................................57
Hue,Saturation,andBrightnessadjustment.........................57
Gammaadjustment..........................................57
SelectingtheProjectionQuality(SelectingColorMode)...................58
SettingAutoIris..............................................59
ChangingtheAspectRatiooftheProjectedImage.......................59
Changingmethods..........................................60
Changingtheaspectmode .....................................60
Interactive Function
Summary of the Interactive Function ........................ 63
PerformingaVarietyofTaskswiththeInteractiveFunction.................63
ThreeModes .................................................64
Before Using the InteractiveFunction ....................... 65
AutoCalibration ..............................................65
ManualCalibration ............................................66
WhenYouNeedtoCalibratethePen ................................67
UsingthePen ................................................67
Drawing .................................................. 69
DrawingonaWhiteboardScreen(WhiteboardMode) .....................69
StartingWhiteboardMode.....................................69
Toolbarfunctions........................................... 70
Bottomtoolbarfunctions......................................72
Readpaperdocumentsfromascanner............................. 73
OpeningfilesandreadingintoWhiteboardMode.....................74
DrawingontheProjectedImage(PCFreeAnnotation)....................75
StartingPCFreeAnnotation....................................75
Toolbarfunctions........................................... 76
Bottomtoolbarfunctions......................................78
UsingDrawingContent .................................... 80
Saving ..................................................... 80
ForWhiteboardMode ........................................ 80
ForPCFreeAnnotation.......................................80
Printing ....................................................81
ForWhiteboardMode ........................................ 81
ForPCFreeAnnotation .......................................82
SendingEmails(WhiteboardModeOnly).............................82
Operating a Computer from the Projected Screen (PC
Interactive) ............................................... 84
PreparingtheProjector .........................................84
InstallEasyInteractiveDriver(MacOSXonly)........................85
ChangingtoPCInteractive.......................................86
AdjustingthePenOperationArea ..................................87
ManualAdjustPenArea .......................................87
Useful Functions
ProjectionFunctions ....................................... 90
ProjectingTwoImagesSimultaneously(SplitScreen).....................90
Inputsourcesforsplitscreenprojection............................90
Operatingprocedures........................................ 91
Whenusingtheinteractivefunction...............................93
Restrictionsduringsplitscreenprojection ...........................95
ProjectingImagesStoredonaUSBStorageDevice(PCFree)................95
Specifications for files thatcanbeprojectedusingPCFree...............95
PCFreeexamples ...........................................97
PCFreeoperatingmethods .....................................97
Projectingtheselectedimagesormovies...........................99
ProjectingPDFfiles......................................... 100
Projectingimagefilesinafolderinsequence(Slideshow)............... 102
Playingascenario.......................................... 103
Operationswhileplayingascenario.............................. 103
ImagefiledisplaysettingsandSlideshowoperationsettings............. 104
HidingtheImageandSoundTemporarily(A/VMute) .................... 105
FreezingtheImage(Freeze) ..................................... 105
PointerFunction(Pointer) ....................................... 105
EnlargingPartoftheImage(E-Zoom) ............................... 107
UsingtheRemoteControltoOperatetheMousePointer(WirelessMouse)...... 108
SavingaUser'sLogo ........................................... 109
Contents
4

SavingUserPattern ........................................... 111
Security Functions ........................................ 113
ManagingUsers(PasswordProtect)................................ 113
KindsofPasswordProtect ..................................... 113
SettingPasswordProtect..................................... 113
EnteringthePassword....................................... 114
RestrictingOperation(ControlPanelLock)........................... 115
Anti-TheftLock .............................................. 117
Installingthewirelock ....................................... 117
Network Functions ....................................... 118
UsingtheInteractiveFunctionoveraNetwork.........................118
Starting ................................................. 118
Restrictions ...............................................118
Projectingwith"ConnecttoaNetworkProjector" ....................... 118
Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point
..........................................................120
Connectionsetupmethod.................................... 120
Monitoring and Controlling ............................... 122
AboutEasyMPMonitor .........................................122
ChangingSettingsUsingaWebBrowser(WebControl) ...................122
Projectorsetup ............................................ 122
DisplayingtheWebControlscreen ...............................123
DisplayingtheWebRemotescreen.............................. 123
SettingCertificates ..........................................125
SecureHTTPNotes..........................................125
Listofsupportedcertificates ................................... 126
UsingtheMailNotificationFunctiontoReportProblems ..................126
ReadingErrorNotificationMail ................................. 126
ManagementUsingSNMP...................................... 127
ESC/VP21Commands ..........................................127
Commandlist............................................. 127
Cablelayouts............................................. 128
AboutPJLink ................................................129
About Crestron RoomView
®
..................................... 129
Operatingaprojectorfromyourcomputer......................... 130
SettingSchedule ............................................. 133
SettingMethods ........................................... 133
Clock ................................................... 134
Schedule ................................................ 134
Configuration Menu
Using the Configuration Menu ............................. 136
ListofFunctions .......................................... 137
ConfigurationMenuTable...................................... 137
Networkmenu ............................................ 138
ImageMenu ................................................ 139
SignalMenu ................................................ 140
SettingsMenu ...............................................142
ExtendedMenu ..............................................144
EasyInteractiveFunctionsettingitems ............................ 146
WhiteboardSettingsscreen................................... 147
NetworkMenu .............................................. 150
NotesonoperatingtheNetworkmenu ............................151
Softkeyboardoperations ..................................... 152
Basicmenu............................................... 152
WirelessLANmenu......................................... 153
Securitymenu ............................................ 155
WiredLANmenu........................................... 157
AdministratorSettingsmenu ...................................158
Resetmenu ............................................... 162
InfoMenu(DisplayOnly)........................................162
ResetMenu.................................................163
Troubleshooting
UsingtheHelp ........................................... 165
ProblemSolving .......................................... 166
ReadingtheIndicators ......................................... 166
WhentheIndicatorsProvideNoHelp............................... 170
Contents
5

ProblemsRelatingtoImages.....................................171
Noimagesappear .......................................... 171
Moving images are not displayed (only the moving image portion turns black)
........................................................172
Projectionstopsautomatically.................................. 172
ThemessageNotsupportedisdisplayed...........................172
ThemessageNoSignalisdisplayed .............................. 172
Imagesarefuzzy,outoffocus,ordistorted......................... 173
Interferenceordistortionappearinimages ......................... 174
Themousecursorflickers(onlywhenprojectingUSBDisplay)............ 174
The image is truncated (large) or small, the aspect is not suitable, or the image has
beenreversed.............................................175
Imagecolorsarenotright .....................................175
Imagesappeardark ......................................... 176
ProblemswhenProjectionStarts .................................. 177
Theprojectordoesnotturnon................................. 177
ProblemswiththeInteractiveFunction..............................177
Cannotusetheprojector'sdrawingfunction ........................ 177
Cannotoperateasamouseanddrawbyconnectingtoacomputer........ 178
The message An error occurred in the Easy Interactive Function. is displayed
........................................................178
Computer'smousedoesnotworkcorrectly.........................178
TheEasyInteractivePendoesnotwork ............................179
TheresponsetimefortheEasyInteractivePenisslow ..................179
Thedotdoesnotmovetothenextposition.........................179
Thedotmovesautomatically ...................................180
Cannotperformoperationswhilecapturing,printing,orsaving........... 180
Cannotpastethecaptureoftheprojectedscreencorrectly.............. 180
Cannotprintnormally ....................................... 180
Cannotscannormally........................................181
The time is out of sync, settings for the internal storage are not reflected correctly
........................................................181
Cannotchangethesource.................................... 181
OtherProblems ..............................................182
Nosoundcanbeheardorthesoundisfaint........................ 182
Thereisnoiseintheaudio(onlywhenprojectingUSBDisplay)............182
Theremotecontroldoesnotwork ............................... 183
Iwanttochangethelanguageformessagesandmenus ................ 183
TheauthenticationsettingofwirelessLANfails ...................... 183
Mail is not received even if an error occurswiththeprojector .............184
The message The battery that saves your clock settings is running low. is displayed
........................................................184
ImagefilenamesarenotdisplayedcorrectlyinPCFree.................184
Cannotchangesettingsusingawebbrowser....................... 185
AboutEventID ........................................... 186
Maintenance
Cleaning ................................................. 189
CleaningtheProjector'sSurface ...................................189
CleaningtheProjectionWindow .................................. 189
CleaningtheObstacleSensor.................................... 189
CleaningtheAirFilter ..........................................190
ReplacingConsumables ................................... 191
ReplacingtheLamp........................................... 191
Lampreplacementperiod .....................................191
Howtoreplacethelamp ......................................192
Resettingthelamphours..................................... 194
ReplacingtheAirFilter......................................... 194
Airfilterreplacementperiod................................... 194
Howtoreplacetheairfilter .................................... 194
Appendix
Optional Accessories and Consumables .................... 198
OptionalAccessories .......................................... 198
Consumables ............................................... 198
Screen Size and Projection Distance ........................ 199
SupportedMonitorDisplays ............................... 201
SupportedResolutions......................................... 201
Computersignals(analogRGB)................................. 201
ComponentVideo .......................................... 201
Contents
6

Compositevideo ........................................... 201
InputsignalfromtheHDMIportandDisplayPort ..................... 201
Specifications ............................................ 203
ProjectorGeneralSpecifications...................................203
Appearance .............................................. 207
Glossary ................................................. 209
GeneralNotes ............................................ 211
WirelessTelegraphyActRegulations............................... 211
AboutNotations ............................................. 211
GeneralNotice: .............................................. 212
Index .................................................... 213
Contents
7

Introduction
This chapter explains the projector's features and the part names.

Interactive Function (Easy Interactive Function)
You can perform the following operations with the electronic pen (Easy
Interactive Pen).
•Draw on plain screens such as whiteboards
•Draw on documents being projected
•Perform computer mouse operations on the projected screen
•Read paper documents from a scanner
•Save the projected screen
•Print the projected screen
•Attach the projected screen to an email and send
s"Interactive Function" p.62
Easily Perform Operations from the Control Pad
By installing the Control Pad supplied, you can easily perform frequently
used operations such as turning the projector on or off and changing the
source. You can also connect a USB storage or USB cables for a printer and
so on.
s"Control Pad" p.23
s"Connecting to the Control Pad" p.41
Connecting to a Network and Projecting Images
from the Computer's Screen
When connected to the network, you can perform the following operations.
You can connect the projector to a computer on
a network and project the computer's screen
using the supplied EasyMP Network Projection
(application software).
sEasyMP Network Projection Operation
Guide
Content drawn using the interactive function
can also be projected from projectors in other
conference rooms.
s"Using the Interactive Function over a
Network" p.118
Project Two Images Simultaneously (Split Screen)
This function divides the projected screen in
two and projects two types of image side-by-
side. By simultaneously projecting images from
two sources on one screen, you can raise the
impact of your message or proposition during
video conferences or presentations.
s"Projecting Two Images Simultaneously
(Split Screen)" p.90
Projector Features
9

Front/Top
Name Function
ARemote receiver Receives signals from the remote control.
BLamp cover Open when replacing the projector's lamp.
s"Replacing the Lamp" p.191
CLamp cover fixing
screw
Screw to fix the lamp cover in place.
s"Replacing the Lamp" p.191
DAir exhaust vent Exhaust vent for air used to cool the projector internally.
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent. Hot air from the air exhaust vent could
cause burns, warping, or accidents to occur.
ECable cover fixing
screws
Screws to fix the cable cover in place.
Name Function
FCable cover Open by loosening both of the screws when connecting to
an input port or installing the wireless LAN unit.
GControl panel Operates the projector.
s"Control Panel" p.15
HSpeaker Outputs audio.
Part Names and Functions
10

Side
Name Function
AAir filter cover
open/close lever
Opens and closes the air filter cover.
BSecurity cable
installation point
Pass a commercially available wire lock through here and
lock it in place.
s"Installing the wire lock" p.117
Name Function
CWireless LAN indicator Indicates the access status to the supplied wireless LAN
unit.
DEasy Interactive
Function receiver
Receives signals from the Easy Interactive Pen.
s"Interactive Function" p.62
EObstacle sensor Detects obstacles that are interfering with the projection
area.
s"Cleaning the Obstacle Sensor" p.189
FRemote receiver Receives signals from the remote control.
GProjection window Projects images.
Warning
•Do not look into the projection window while
projecting.
•Do not place any objects or put your hand near
the projection window. It could cause burns,
fire, or the object to warp because this area rea‐
ches a high temperature due to the concentrated
projection light.
HSecurity slot The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s"Anti-Theft Lock" p.117
IAir filter cover Open when changing the air filter or operating the focus
lever.
JAir intake vent
(air filter)
Takes in air to cool the projector internally.
s"Cleaning the Air Filter" p.190
s"Replacing the Air Filter" p.194
KFocus lever Adjusts the image focus.
Open the air filter cover to operate.
Part Names and Functions
11

Interface
The following ports are available under the cable cover.
Name Function
AWireless LAN unit
installation section
Install the supplied wireless LAN unit here.
s"Installing the wireless LAN unit" p.40
BAudio1 port •Inputs audio from equipment connected to the
Computer port.
•Inputs audio from other devices when projecting
images from the device connected to the USB-A port.
CComputer port Inputs image signals from a computer and component
video signals from other video sources.
DAudio Out port Outputs audio from the currently projected image to an
external speaker.
Name Function
EUSB-B port •Connects the projector to a computer via the supplied
USB cable, and projects the images on the computer.
s"Projecting with USB Display" p.48
•Connects the projector to a computer via the supplied
USB cable to use the Wireless Mouse function.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.108
•Connects the projector to a computer via the supplied
USB cable to use the Easy Interactive Pen as a mouse or
as a pen to draw on the projected screen.
s"Operating a Computer from the Projected
Screen (PC Interactive)" p.84
•By connecting the projector to the Control Pad via the
supplied USB cable, you can connect to a computer
from the Control Pad.
s"Connecting to the Control Pad" p.41
FMonitor Out port Outputs analog RGB signals input from the Computer
port to an external monitor. You cannot output signals
input from other ports or component video signals.
GLAN port Connects a LAN cable to connect to a network.
HHDMI port Inputs video signals from HDMI compatible video
equipment and computers. This projector is compatible
with HDCP
g .
s"Connecting Equipment" p.29
IDisplayPort Inputs video signals from DisplayPort compatible
computers. This projector is compatible with HDCP
g .
JAudio3 port Inputs audio for the specific source set in Extended -
Audio Input Setup.
KRS-232C port When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s"ESC/VP21 Commands" p.127
LPower inlet Connects the power cord to the projector.
s"From Installation to Projection" p.46
Part Names and Functions
12

Name Function
MUSB-A port •Connects a USB memory device or a digital camera and
projects PDFs, movies, or images using PC Free.
s"Projecting Images Stored on a USB Storage
Device (PC Free)" p.95
•By connecting a USB memory, you can store and view
content drawn using the interactive function.
s"Using Drawing Content" p.80
•You can connect USB printers.
•By connecting the projector to the Control Pad via the
supplied USB cable, you can connect to a USB memory
or a printer from the Control Pad.
s"Connecting to the Control Pad" p.41
NUSB-A port Projects images from the optional Document Camera.
You cannot project using other devices from this port.
OVideo port Inputs composite video signals from video sources.
PAudio2 port Inputs audio from equipment connected to the Video
port.
QRemote port Connects to the Control Pad.
s"Control Pad" p.23
Base
Name Function
ACeiling mount fixing
points (five points)
Attach the optional Ceiling Mount here when suspending
the projector from a ceiling.
s"Installing the Projector" p.27
s"Optional Accessories" p.198
BSecurity cable
installation point
Pass a commercially available wire lock through here and
lock it in place.
s"Installing the wire lock" p.117
Part Names and Functions
13

Name Function
CRear foot fixing points
(two points)
Attach the feet when using the projector on a surface such
as a desk. (Only models with feet supplied)
s"Attaching the feet (Only models with feet supplied)"
p.14
DWall mount fixing
points (four points)
Attach the setting plate when mounting on a wall. (Only
models with setting plate supplied)
sInstallation Guide
s"Optional Accessories" p.198
EFront foot fixing point Attach the foot with a spacer when using the projector on a
surface such as a desk. (Only models with feet supplied)
s"Attaching the feet (Only models with feet supplied)"
p.14
Attaching the feet (Only models with feet supplied)
Insert the feet into the foot fixing points.
AInsert the foot with the spacer into the front foot fixing point.
BInsert the rear feet (x2) into the foot fixing points.
a
You can install this projector vertically on a desk.
s"Installation Methods" p.27
Part Names and Functions
14

Control Panel
Name Function
AStatus indicators Indicates the projector's status using color, and by being lit
or flashing.
s"Reading the Indicators" p.166
B[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s"Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.47
C[Enter] button
[]
•When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
•If pressed while projecting analog RGB signals from the
Computer port, you can automatically optimize
Tracking, Sync., and Position.
Name Function
D[w][v] button •Displays the Keystone screen.
s"H/V-Keystone" p.51
•If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s"Using the Configuration Menu" p.136
s"Using the Help" p.165
E[Help] button Displays and closes the help screen which shows you how
to deal with problems if they occur.
s"Using the Help" p.165
F[Esc] button •Stops the current function.
•If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s"Using the Configuration Menu" p.136
G[Tele]/[Wide] buttons •Adjusts the size of the projection screen. Press the [Tele]
button to reduce the size of the projection screen and
press the [Wide] button to increase the size of the
projection screen.
•Corrects keystone distortion in the horizontal direction
when the Keystone screen is displayed.
s"H/V-Keystone" p.51
•If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s"Using the Configuration Menu" p.136
s"Using the Help" p.165
H[Menu] button Displays and closes the Configuration menu.
s"Using the Configuration Menu" p.136
I[t] button Turns the projector power on or off.
s"From Installation to Projection" p.46
Part Names and Functions
15

Remote Control Name Function
A[t] button Turns the projector power on or off.
s"From Installation to Projection" p.46
B[Capture] button Takes a snapshot of the projected screen. After taking the
snapshot, the image is pasted onto a new page in
Whiteboard Mode. (This button cannot be used in
Whiteboard Mode.)
s"Using Drawing Content" p.80
C[Print] button Prints the projected screen.
s"Using Drawing Content" p.80
DNumeric buttons •Enter the Password.
s"Setting Password Protect" p.113
•Use this button to enter numbers in Network settings
from the Configuration menu.
E[Auto] button If pressed while projecting analog RGB signals from the
Computer port, you can automatically optimize Tracking,
Sync., and Position.
F[Aspect] button Each time the button is pressed, the aspect mode changes.
s"Changing the Aspect Ratio of the Projected Image"
p.59
G[Num] button Hold down this button and press the numeric buttons to
enter passwords and numbers.
s"Setting Password Protect" p.113
H[Menu] button Displays and closes the Configuration menu.
s"Using the Configuration Menu" p.136
Part Names and Functions
16

Name Function
I[][ ][ ][ ]
button
•When the Configuration menu or Help screen is
displayed, pressing these buttons selects menu items
and setting values.
s"Using the Configuration Menu" p.136
•When projecting a PC Free, pressing these buttons
displays the previous/next image, rotates the image, and
so on.
s"Projecting Images Stored on a USB Storage
Device (PC Free)" p.95
•During Wireless Mouse function, the mouse pointer
moves in the direction of the button that was pushed.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.108
J[] button •When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
s"Using the Configuration Menu" p.136
•Acts as a mouse's left button when using the Wireless
Mouse function.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.108
K[User] button Select any frequently used item from the seven available
Configuration menu items, and assign it to this button. By
pressing the [User] button, the assigned menu item
selection/adjustment screen is displayed, allowing you to
make one-touch settings/adjustments.
s"Settings Menu" p.142
Auto Calibration is assigned as the default setting.
Name Function
L[Page] buttons
[[][]]
Changes pages in files such as PowerPoint files when using
the following projection methods.
(This button cannot be used in Whiteboard Mode.)
•When using the Wireless Mouse function
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.108
•When using USB Display
s"Projecting with USB Display" p.48
•When connecting to a network
When projecting images using PC Free, pressing these
buttons displays the previous/next screen.
M[E-Zoom] buttons
[z][x]
Enlarges or reduces the image without changing the
projection size.
(This button cannot be used in Whiteboard Mode.)
s"Enlarging Part of the Image (E-Zoom)" p.107
N[A/V Mute] button •Turns the video and audio on or off.
s"Hiding the Image and Sound Temporarily (A/V
Mute)" p.105
•You can change the Projection mode as follows by
pressing the button for about five seconds.
FrontWFront/Upside Down
RearWRear/Upside Down
O[Split] button Each time the button is pressed, the image changes
between projecting two images simultaneously by
splitting the projected screen, or projecting one image as
normal.
(This button cannot be used in Whiteboard Mode.)
s"Projecting Two Images Simultaneously (Split
Screen)" p.90
PStrap attachment hole Allows you to attach a commercially available strap to the
remote control.
Part Names and Functions
17

Name Function
Q[Help] button Displays and closes the help screen which shows you how
to deal with problems if they occur.
s"Using the Help" p.165
R[Freeze] button Pauses or resumes image playback.
s"Freezing the Image (Freeze)" p.105
S[Volume] buttons
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s"Adjusting the Volume" p.56
T[Pointer] button Displays the on-screen pointer.
s"Pointer Function (Pointer)" p.105
U[Esc] button •Stops the current function.
•If pressed when the Configuration menu is displayed, it
moves to the previous level.
s"Using the Configuration Menu" p.136
•Acts as a mouse's right button when using the Wireless
Mouse function.
s"Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.108
V[Pen Mode] button Changes between using the PC interactive function or
drawing for Easy Interactive Pen. (This button cannot be
used in Whiteboard Mode.)
s"Summary of the Interactive Function" p.63
W[Color Mode] button Each time the button is pressed, the color mode changes.
s"Selecting the Projection Quality (Selecting Color
Mode)" p.58
X[Whiteboard] button •Press this when the projector is off to turn on the
projector and start the interactive function in
Whiteboard Mode.
•Press this when the projector is on to change to
Whiteboard Mode. If you press it in Whiteboard Mode,
the image changes to the previous image source.
s"Before Using the Interactive Function" p.65
Name Function
Y[Save] button Saves the projected screen.
s"Using Drawing Content" p.80
Z[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s"Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.47
aRemote control light-
emitting area
Outputs remote control signals.
Part Names and Functions
18

Replacing the remote control batteries
If the remote control becomes unresponsive or inoperable after it has been
used for some time, the batteries may have reached the end of their service
life. When this happens, replace them with new batteries. Obtain two AA
size manganese or alkaline batteries. You cannot use other batteries except
for the AA size manganese or alkaline.
Attention
Make sure you read the following manual before handling the batteries.
sSafety Instructions
a
Remove the battery cover.
While pushing the battery cover catch, lift the cover up.
b
Replace the old batteries with new batteries.
Caution
Check the positions of the (+) and (-) marks inside the battery holder to
ensure the batteries are inserted the correct way.
c
Reattach the battery cover.
Press the battery cover until it clicks into place.
Part Names and Functions
19

Remote control operating range
Easy Interactive Pen
There are two types of Easy Interactive Pens with different colored bottom
sections. You cannot use Easy Interactive Pens with the same colored
bottom sections at the same time.
s"Optional Accessories" p.198
Name Function
APen tip button Hold the pen close to the projected screen, and press to
use.
s"Using the Pen" p.67
s"Optional Accessories" p.198
BStrap attachment hole Allows you to attach a commercially available strap.
Part Names and Functions
20