Epson PowerLite 1835 System manual

INSTALLATION HANDBOOK
Remote Control Information
Epson PowerLite 1835
1
Remote Control Operation
The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m)
away. You can point it at the screen, or the front or back of the projector.
Make sure that you aim the remote control at the projector's receivers within the angles listed here.
1 30º
2 19.7 feet (6 m)
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Using the Remote Control as a Wireless Mouse
You can use the projector's remote control as a wireless mouse so you can control your computer
presentation from a distance.
Note: You cannot use the remote control's wireless mouse function when you use your projector's USB
Type B port to project video. However, you can use the Up and Down Page buttons to move through a
presentation.
1. Connect the projector to a computer using the projector's Computer or HDMI port.
2. Using a USB cable, connect the projector's USB TypeB port to a USB port on your computer (for
wireless mouse support).
3. Press the Menu button, select the Extended menu, and select Wireless Mouse as the USB Type B
setting.
4. Start your presentation.
5. Use the following buttons on the remote control to control your presentation:

INSTALLATION HANDBOOK
Remote Control Information
Epson PowerLite 1835
2
•To move through PowerPoint slides, press the Up and Down Page buttons.
•To move the cursor on the screen, use the arrow buttons.
•To left-click, press the Enter button once (press it twice to double-click).
•To right-click, press the Esc button.
•To drag-and-drop, hold the Enter button as you move the cursor with the arrow buttons, then
release Enter at the destination.
Using the Remote Control as a Presentation Pointer
You can use the projector's remote control as a pointer to help you call out important information during
a presentation. The default pointer shape is an arrow, but you can select an alternative shape using the
Settings menu.
1. Press the Pointer button on the remote control.
2. Use the arrow buttons on the remote control to move the pointer on the screen.
3. Press Esc to clear the pointer from the screen.

INSTALLATION HANDBOOK
Remote Control Information
Epson PowerLite 1835
3
Selecting an Image Source
If you connected multiple image sources to the projector, such as a computer and DVD player, you may
want to switch from one image source to the other.
1. Make sure the connected image source you want to use is turned on.
2. For video image sources, insert a DVD or other video media and press Play (if necessary).
3. Do one of the following:
•Press the Source Search button on the projector or remote control until you see the image from
the source you want.
•Press the button for the source you want on the remote control. If there is more than one port for
that source, press the button again to select the other source.
1 Computer port sources
2 Video and HDMI sources
3 USB port sources (computer display and external devices)
4 Network source (PowerLite 93/95/96W/905/915W/1835)
4. If you see a blank screen or a "No Signal" message, try the following:
•Check that the device cables are securely connected to the projector and the device.
•Make sure the projector is turned on and its lens cover is open.
•For laptop computers, make sure you have set up your laptop to output its display properly.