Equinox Systems EPSILON5 MKII User manual

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: [email protected] Website: www.integrated-circuit.com
Excellent Integrated System Limited
Excellent Integrated System Limited
Stocking Distributor
Stocking Distributor
Click to view price, real time Inventory, Delivery & Lifecycle Information:
Click to view price, real time Inventory, Delivery & Lifecycle Information:
Equinox Technologies
Equinox Technologies
EPSILON5-A1
EPSILON5-A1
For any questions, you can email us directly:
For any questions, you can email us directly:
[email protected]
[email protected]
1 / 86
1 / 86

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: [email protected] Website: www.integrated-circuit.com
User Guide
Portable ISP Programmer for
Atmel, Atmel Wireless (Temic) and
Philips FLASH Microcontrollers
2 / 86
2 / 86

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: [email protected] Website: www.integrated-circuit.com
EPSILON5 MKII Programmer - User Guide V1.12 – 1st August 2007 i
Contents
Copyright Information............................................................................................................iii
Equinox Warranty Information..............................................................................................iv
Electromagnetic Compatibility (EMC) Compliance.............................................................vi
RoHS Compliance...................................................................................................................vi
Technical Support..................................................................................................................vii
Product Documentation.......................................................................................................viii
1.0 Programmer Overview ......................................................................................................1
1.1 System Contents ............................................................................................................1
1.2 Hardware Overview (external layout).............................................................................2
1.3 Hardware Overview (internal layout)..............................................................................3
1.4 Push Button Functions....................................................................................................4
1.5 Programmer Specifications ............................................................................................5
1.5.1 Programmer Specifications Overview....................................................................5
1.5.2 Voltage range.........................................................................................................8
1.5.3 Current Consumption / Parameters.......................................................................9
1.5.4 DC Power Input Connector (CON1).....................................................................10
1.5.5 DC Power Cable Specification.............................................................................10
1.5.6 J5 – RS-232 Communications Port & Serial Cables ...........................................11
1.6 Device Support.............................................................................................................14
1.6.1 Devices supported by the programmer................................................................14
1.6.2 Programming Interface to Target Device.............................................................15
2.0 Getting Started Guide......................................................................................................17
2.1 Overview.......................................................................................................................18
2.2 Hardware Installation Procedure..................................................................................19
2.3 Software Overview and Installation..............................................................................22
2.3.1 Software Overview...............................................................................................22
2.3.2 Programmer Control Mechanisms.......................................................................23
2.3.3 Software Installation.............................................................................................24
2.4 Operating the programmer...........................................................................................25
2.5 Development Mode (EDS)............................................................................................27
2.5.1 Overview ..............................................................................................................27
2.5.2 Creating a new EDS (Development Mode) Project.............................................27
2.5.3 Testing an existing Programming Project in a Project Collection in EDS
(Development Mode).....................................................................................................28
2.5.4 Overview of EDS – Development Mode ..............................................................29
2.5.5 Buffer Window - Control Buttons..........................................................................31
2.5.6 Example of using EDS.........................................................................................32
2.6 Standalone Mode..........................................................................................................33
2.6.1 Overview ..............................................................................................................33
2.6.2 Steps required before operating the programmer in Standalone Mode..............33
2.6.3 How to export your Development (EDS) project to Project Builder.....................33
2.6.4 Executing a Programming Project in Standalone Mode......................................34
2.7 Script Mode...................................................................................................................35
2.8 ConsoleEDS – Command Line control.........................................................................35
3 / 86
3 / 86

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: [email protected] Website: www.integrated-circuit.com
EPSILON5 MKII Programmer - User Guide V1.12 – 1st August 2007
ii
3.0 Programmer / Target System Power Supply Scenarios + Standalone Mode
Programming Instructions....................................................................................................37
3.1 Overview.......................................................................................................................37
3.2 Programmer / Target System Power Supply Schematic..............................................38
3.3 Earthing requirements...................................................................................................40
3.3.1 Overview...............................................................................................................40
3.3.2 Laptop earthing issues.........................................................................................40
3.3.3 Desktop PC earthing issues.................................................................................40
3.3.4 Earthing recommendations ..................................................................................41
3.4 Programmer Powers the Target System ......................................................................42
3.4.1 Overview...............................................................................................................42
3.4.2 Hardware Setup - Programmer powers the Target System.................................42
3.4.3 Circuit Schematic - Programmer powers the Target System...............................43
3.4.4 Set up instructions - Programmer powers the Target System.............................44
3.4.5 Programming Instructions (Standalone Mode) - Programmer powers the Target
System...........................................................................................................................46
3.5 Target System powers the Programmer.......................................................................48
3.5.1 Overview...............................................................................................................48
3.5.2 Hardware Setup - Target System powers the Programmer.................................48
3.5.3 Circuit Schematic - Target System powers the Programmer...............................49
3.5.4 Setup instructions - Target System powers the Programmer..............................50
3.5.5 Programming Instructions (Standalone Mode) - Target System powers the
programmer...................................................................................................................51
3.6 Programmer and Target System are independently powered......................................53
3.6.1 Overview...............................................................................................................53
3.6.2 Hardware Setup - Programmer and Target System independently powered......53
3.6.3 Circuit Schematic - Programmer and Target System independently powered....54
3.6.4 Set up instructions - Programmer and Target System independently powered..55
3.6.5 Programming Instructions ....................................................................................56
4.0 ISP Header Selection .......................................................................................................57
4.1 Overview.......................................................................................................................57
4.2 ISP Header Selection Chart (by header)......................................................................58
4.3 ISP Header Selection Chart (by Device) ......................................................................60
4.4 J3 - Atmel 6-way ISP Header (SPI Interface)...............................................................61
4.5 J6(a) - Equinox 10-way Header (Generic SPI Interface)..............................................63
4.6 J6(b) - Equinox 10-way Header (ATtiny11/12/15 HV Interface)...................................66
4.7 J6(c) - Equinox 10-way Header (UART Boot Loader)..................................................68
4.8 J7 - Atmel 10-way Header (SPI Interface)....................................................................70
4.9 J8 - Atmel 10-way JTAG Header (JTAG Interface)......................................................72
4.10 ISP Cable considerations............................................................................................74
4 / 86
4 / 86

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: [email protected] Website: www.integrated-circuit.com
EPSILON5 MKII Programmer - User Guide V1.12 – 1st August 2007 iii
Copyright Information
Information in this document is subject to change without notice and does not represent a
commitment on the part of the manufacturer. The software described in this document is furnished
under license agreement or nondisclosure agreement and may be used or copied only in accordance
with the terms of the agreement.
It is against the law to copy the software on any medium except as specifically allowed in the license
or nondisclosure agreement.
The purchaser may make one copy of the software for backup purposes. No part of this manual may
be reproduced or transmitted in any form or by any means, electronic, mechanical, including
photocopying, recording, or information retrieval systems, for any purpose other than for the
purchaser’s personal use, without written permission.
© 2000 - 2007 Copyright Equinox Technologies UK Limited. All rights reserved.
AtmelTM and AVRTM are trademarks of the Atmel Corporation
Microsoft, MS-DOS, WindowsTM, Windows 95TM, Windows 98TM, Windows XPTM and Windows NT4TM
are registered trademarks of the Microsoft Corporation
IBM, PC and PS/2 are registered trademarks of International Business Machines Corporation
Intel, MCS 51, ASM-51 and PL/M-51 are registered trademarks of the Intel Corporation
Every effort was made to ensure accuracy in this manual and to give appropriate credit to persons,
companies and trademarks referenced herein.
Equinox guarantees that its products will be free from defects of material and workmanship under
normal use and service, and these products will perform to current specifications in accordance with,
and subject to, the Company’s standard warranty which is detailed in Equinox’s Purchase Order
Acknowledgment.
5 / 86
5 / 86

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: [email protected] Website: www.integrated-circuit.com
EPSILON5 MKII Programmer - User Guide V1.12 – 1st August 2007
iv
Equinox Warranty Information
This product is guaranteed by Equinox Technologies UK Limited for a period of 12 months (1 year)
after the date of purchase against defects due to faulty workmanship or materials. One guarantee
covers both parts and labour. Service under the guarantee is only provided upon presentation of
reasonable evidence that the date of the claim is within the guarantee period (e.g. completed
registration/guarantee card or a purchase receipt).
The guarantee is not valid if the defect is due to accidental damage, misuse or neglect and in the
case of alterations or repair carried out by unauthorised persons. A number of exceptions to the
warranty are listed in the ‘Exceptions to warranty’ section below. Service (during and after guarantee
period) is available in all countries where the product is distributed by Equinox Technologies UK
Limited.
Exceptions to warranty
Over-voltage damage
This warranty does not cover damage to the programmer due to voltages beyond the specified
voltage limits being applied to the ‘DC Power Input’ (CON1) or any of the ISP Headers. The user must
ensure that sufficient care is taken to avoid over-voltage and static conditions on any of the ‘ISP
Header’ I/O pins.
Over-current damage
This warranty does not cover damage to the programmer due to excessive current being drawn from
the programmer power supply. The user must ensure that there is sufficient over-current protection
within the test fixture to protect against short circuit loads.
Short-circuit damage
This warranty does not cover damage to the programmer due to short-circuit loads being placed
across programmer I/O lines.
Damage to the Programmer Line Driver Circuitry
This warranty does not cover damage to the programmer ‘Line Driver Circuitry’ due to over-
voltage, over-current or short-circuit of any of the programmer I/O lines. It is the responsibility of
the user to make sure that sufficient precautions are taken before plugging the ISP Cable into a
Target System.
Warning!
Any damage caused to the programmer by Electrostatic Discharge (ESD) through inadequate
earthing is not covered under the warranty of the product.
6 / 86
6 / 86

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: [email protected] Website: www.integrated-circuit.com
EPSILON5 MKII Programmer - User Guide V1.12 – 1st August 2007 v
Disclaimer
Whilst every effort has been made to ensure that programming algorithms are correct at the time of
their release, it is always possible that programming problems may be encountered, especially when
new devices and their associated algorithms are initially released. It is Equinox’s Company Policy to
endeavour to rectify any programming issues as quickly as possible after a validated fault report is
received.
It is recommended that high-volume users always validate that a sample of a devices has been
programmed correctly, before programming a large batch. Equinox Technologies UK Ltd. can not be
held responsible for any third party claims which arise out of the use of this programmer including
‘consequential loss’ and ‘loss of profit’.
Equinox Technologies UK Ltd. cannot be held responsible for any programming problems which are
‘out of our control’. This type of problem is usually listed in the ‘Errata Sheet’ for the particular device
being programmed and is available from the silicon vendor.
Information contained in this manual is for guidance purposes only and is subject to change. E&OE.
7 / 86
7 / 86

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: [email protected] Website: www.integrated-circuit.com
EPSILON5 MKII Programmer - User Guide V1.12 – 1st August 2007
vi
Electromagnetic Compatibility (EMC)
Compliance
The ‘EPSILON5’ is a CE Approved Product. It is designed for use in an ESD controlled environment
i.e. development or production. This means, therefore, that the user must ensure that there is no
possibility of damage from electrostatic discharge (ESD). Since the devices and equipment to which
this product is likely to be connected may well themselves be susceptible to ESD, this should not
pose any difficulty.
For example, if you are handling microcontrollers and EEPROMS etc. then you will already be used to
appropriate precautions, such as the use of anti-static mats, wrist straps and so on. You should treat
your ‘EPSILON5’ with the same care as you would these types of devices. Always ensure that you
are not yourself carrying a static charge before handling the product. Wearing an earthed anti-static
wrist strap is recommended.
Equinox have taken great care in designing this product to be compliant with the European EMC
directive. When using the equipment be sure to follow the instructions provided. Although RF
emissions are within prescribed limits, care should be taken if you are using the product near to
sensitive apparatus. If you experience any difficulty please refer to Equinox Technical Support.
RoHS Compliance
The ‘EPSILON5’ is a RoHS compliant product.
ESD Points to remember
•Work in a static-free environment.
•Wear an earthed wrist strap when handling either the programmer and/or
any programmable device.
•Ensure that the PC, programmer and Target system are connected to the
same EARTH (0V) potential.
•Do NOT plug the ISP cable of the programmer into a Target System when
the Target power is ON.
Warning!
Any damage caused to the programmer by Electrostatic Discharge (ESD) through inadequate
earthing is not covered under the warranty of the product.
8 / 86
8 / 86

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: [email protected] Website: www.integrated-circuit.com
EPSILON5 MKII Programmer - User Guide V1.12 – 1st August 2007 vii
Technical Support
It is often the case that users experience problems when installing or using a product for the first time.
If you have a technical support problem, please consult the following list for help:
Manual
On-line help
Press <F1> for help at any time when running EQTools or ISP-PRO.
The help system is context-sensitive. Simply press <F1> on any error message and the
Possible causes of the error should be listed. This help system is updated on a regular
basis. Please see software update details for information on keeping up-to-date with
software revisions.
Internet Web Site
The support page for all Equinox ISP Programmers can be found at:
http://www.equinox-tech.com/products/downloadsearch.asp
E-mail
Please e-mail any technical support questions about this product to:
[e-mail]
Fax
Please fax any technical support questions about this product to: [phone]
Equinox will try our best to answer your questions about this product as quickly as
possible. However, we cannot promise an immediate reply. Please consult our web site for new
software updates as the problem that you are enquiring about may have already been fixed in a new
version.
9 / 86
9 / 86

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: [email protected] Website: www.integrated-circuit.com
EPSILON5 MKII Programmer - User Guide V1.12 – 1st August 2007
viii
Product Documentation
This manual provides an overview of the contents of the EPSILON5 Programming System plus
associated hardware and software. References may be made to other hardware and software
products which are not covered in detail in this manual. Please refer to the table below for a list of
sources of documentation and/or browse to:
http://www.equinox-tech.com/products/downloadsearch.asp
Software:
EQTools Script Builder – Manual
This software is used to create and upload ‘Programming Projects’ to
the programmer.
The following sources of documentation are available for this
software:
•Installation and Getting Started Guide (pdf manual)
•Help file
Upload Wizard - Standalone Project Upload Utility
This software utility is used to upload Programming Projects to any
Equinox programmer. These projects can then be used in
Standalone Mode, i.e. without a PC.
•Please follow the on-screen instructions within the Upload
Wizard utility itself.
ASCII Text Communications Protocol – Application Note
This protocol can be used to control the programmer from an
external controller via RS-232.
The following sources of documentation are available for this
protocol:
•Application Note – AN110 for a full description.
ConsoleEDS Pro – Application note
This software utility allows any Equinox programmer to be controlled
via simple Command Line instructions from a Command Window
within Windows.
The following sources of documentation are available for this
software:
•Application Note 111 – ConsoleEDS Manual
10 / 86
10 / 86