Erbauer ERS18-Li User manual

MNL_ERS18-Li_V01_180608
ERS18-Li
EAN. 3663602799153
ORIGINAL INSTRUCTIONS

3
2
WARNING! Please read all safety warnings carefully and be sure
that they are fully understood before handling the tool.
x1
x2
Safety instructions
Product description
Assembly
Use
Care & maintenance
Guarantee
Declaration of Conformity

5
4
B
1
2
C1
1
2
C2
1
C3
C4 D
2
1
E1 E2
PRODUCT DESCRIPTION
1
13
2
3
4
5
6
7
8
10
11
12
9
A1 1
2
A2

7
6
SAFETY INSTRUCTIONS
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings, instructions,
illustrations and specications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future
reference. The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or battery
operated (cordless) power tool.”
WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
a. Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
E3 E4
F G
H

9
8
f. Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing away from moving parts. Loose
clothes, jewellery or longhair can be caught in moving parts.
g. If
devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
h. Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety
principles. A careless action can cause severe injury within a
fraction of a second.
POWER TOOL USE AND CARE
a. Do not force the power tool. Use the correct power tool for
your application. The correct power tool will do the job better
and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or remove
the battery pack, if detachable, from the power tool before
making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e. Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power
tools operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained
power tools.
c. Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts.Damaged or
entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
PERSONAL SAFETY
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power tool
while you are tired or under the inuence of drugs, alcohol
or medication. A moment of inattention while operating power
tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the
off- position before connecting to power source and/or
battery pack, picking up or carrying the tool.Carrying power
tools with your nger on the switch or energising power tools
that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.

11
10
f. Do not expose a battery pack or tool to re or excessive
temperature. Exposure to re or temperature above 130 °C
may cause explosion.
g. Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specied in the instructions. Charging improperly or at
temperatures outside the specied range may damage the
battery and increase the risk of re.
SERVICE
a. Have your power tool serviced by a qualied repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
b. Never service damaged battery packs. Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
ADDITIONAL SAFETY WARNINGS FOR RECIPROCATING
SAW
a. Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a “live”
wire may make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
b. Use clamps or another practical way to secure and support
the workpiece to a stable platform. Holding the workpiece by
hand or against your body leaves it unstable and may lead to
loss of control.
c. Keep hands away from the sawing range. Do not reach under
the workpiece. Contact with the saw blade can lead to injuries.
d. Apply the machine to the workpiece only when switched on.
Otherwise there is danger of kickback when the cutting tool
jams in the workpiece.
f. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind and
are easier to control
g. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed. Use
of the power tool for operations different from those intended
could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free
from oil and grease. Slippery handles and grasping surfaces
do not allow for safe handling and control of the tool in
unexpected situations.
BATTERY TOOL USE AND CARE
a. Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type of battery
pack may create a risk of re when used with another battery
pack.
b. Use power tools only with specically designated battery
packs. Use of any other battery packs may create a risk of
injury and re.
c. When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a re.
d. Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs,
ush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
e. Do
not use battery pack or tool that is damaged or
modied. Damaged or modied batteries may exhibit
unpredictable behaviour resulting in re, explosion or risk of
injury.

13
12
e. Do not expose battery to water or salt water, or allow the
battery to get wet.
f. Do not disassemble or modify the battery.
g. Do not place the battery in or near re, on stoves or other
high temperature locations. Do not place the battery in direct
sunlight, or use or store the battery inside cars in hot weather.
h. Do not place the battery in microwave ovens, high-pressure
containers or on induction cookware.
i. If you intend to store a battery for a period without use then store
battery at room temperature (19°C to 25°C), charged to about
30 – 50% of capacity. When storing for very long periods boost
charge the battery once per year to prevent over discharge.
The following information applies to professional users only but is
good practice for all users:
ADDITIONAL SAFETY WARNING FOR CONSTRUCTION DUST
The updated Control of Substances Hazardous to Health
Regulations 1st October 2012 now also targets to reduce the
risks associated with silica, wood and gypsumdusts. Construction
workers are one of the at-risk groups within this because of the
dust that they breathe: silica dust is not just a nuisance; it is a real
risk to your lungs!
Silica is a natural mineral present in large amounts in things like
sand, sandstone and granite. It is also commonly found in many
construction materials such as concrete and mortar. The silica is
broken into very ne dust (also known as Respirable Crystalline
Silica or RCS) during many common tasks such as cutting, drilling
and grinding. Breathing in very ne particles of crystalline silica
can lead to the development of: Lung cancer Silicosis Chronic
Obstructive Pulmonary Disorder/Chronic obstructive pulmonary
disease (COPD) And breathing in ne particles of wood dust can
lead to the development of Asthma. The risk of lung disease is
linked to people who regularly breathe construction dust over a
period of time, not on the odd occasion.
e. When sawing, the guide plate must always face against the
workpiece. The saw blade can become wedged and lead to
loss of control over the machine.
f. When the cut is completed, switch off the machine and then
pull the saw blade out of the cut only after it has come to a
standstill. In this manner you can avoid kickback and can place
down the machine securely.
g. Use only undamaged saw blades that are in perfect condition.
Bent or dull saw blades can break, negatively inuence the cut,
or lead to kickback.
h. Do not brake the saw blade to a stop by applying side pressure
after switching off. The saw blade can be damaged, break or
cause kickback.
i. Do not support the workpiece with your hand or foot. Do not
touch objects or the oor with the saw running. Danger of
kickback.
j. Use suitable detectors to determine if utility lines are hidden in
the work area or call the local utility company for assistance.
Contact with electric lines can lead to re and electric shock.
Damaging a gas line can lead to explosion. Penetrating a water
line cause property damage or may cause an electric shock.
k. When working with the machine, always hold it rmly with both
hands and provide a secure stance. The power tool is guided
more secure with both hands.
ADDITIONAL SAFETY WARNINGS FOR BATTERY
a. Do not connect the positive terminal and negative terminal of
the battery to each other with any metal object (such as wire).
b. Do not carry or store battery together with necklaces, hairpins
or other metal objects.
c. Do not pierce the battery with nails, strike the battery with a
hammer, step on the battery or otherwise subject it to strong
impacts or shocks.
d. Do not solder directly onto the battery.

15
14
WARNING! Some dust particles created by power
sanding, sawing, grinding, drill and other construction
jobs contain chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other
masonry products.
• Arsenic and chromium from chemically treated timber.
• Your risk from these exposures varies, depending
upon how often you do this type of work. To reduce
your exposure to these chemicals:
• Work in a well-ventilated area.
• Work with approved safety equipment, such as those dust
masks that are specially designed to lter microscopic
particles
VIBRATION
The European Physical Agents (Vibration) Directive has been
brought in to help reduce hand arm vibration syndrome injuries to
power tool users. The directive requires power tool manufacturers
and suppliers to provide indicative vibration test results to enable
users to make informed decisions as to the period of time a power
tool can be used safely on a daily basis and the choice of tool.
SEE TECHNICAL SPECIFICATIONS IN THE INSTRUCTION
MANUAL FOR THE VIBRATION LEVELS OF YOUR TOOL.
The declared vibration emission value should be used as a
minimum level and should be used with the current guidance on
vibration.
Calculating the actual period of use can be difcult and the HSE
website has further information.
Toprotect the lung, the COSHH Regulations sets a limit on the
amount of these dusts that you can breathe (called a Workplace
Exposure Limit or WEL) when averaged over a normal working
day. These limits are not a large amount of dust: when compared
to a penny it is tiny – like a small pinch of salt: This limit is the legal
maximum; the most you can breathe after the right controls have
been used.
HOW TO REDUCE THE AMOUNT OF DUST?
1. Reduce the amount of cutting by using the best sizes of building
products. Use a less powerful tool e.g. a block cutter instead of
angle grinder.
2. Using a different method of work altogether – e.g. using a nail
gun to direct fasten cable trays instead of drilling holes rst.
3. Please always work with approved safety equipment, such
as those dust masks that specially designed to lter out
microscopic particles and use the dust extraction facility at all
time.
For more information please see the HSE website: http://www.hse.
gov.uk/construction or http://www.hse.gov.uk/pubns/cis69.pdf

17
16
PRODUCT DESCRIPTION
1. Guide plate
2. LED work light
3. Gripping surface
4. Lock button
5. On/off switch
6. Main handle
7. Battery pack (not included)
8. Power bar button
9. Battery pack release button
10. Tool-free blade change lever
11. Tool-free guide plate adjustment lever
12. Blade socket
13. Blade
01 TECHNICAL SPECIFICATIONS
Reciprocating saw
Rated voltage: 18V d.c.
Rated no load speed: 0-3100/min
Stroke length 29mm
Cutting Capacity:
in wood:
in metal:
in aluminum:
180mm
12mm
20mm
Weight (without battery): 2.9 kg
Ambient temperature range for tool and battery use: -10oC to 40oC
For use with battery pack and charger as below:
Battery pack model: EBAT18-Li-2 / EBAT18-Li-4 / EBAT18-Li-5
Charger model: EC18-Li / EFC18-Li / EMC18-Li
NOISE DATA
A weighted sound pressure: LpA=85.6dB(A)
A weighted sound power: LwA=96.6dB(A)
Uncertainty: KPA & KWA=5dB(A)
While working with this power tool, hand/arm vibrations occur.
Adopt the correct working practices in order to reduce the
exposure to vibration. This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
Helping to minimise your vibration exposure risk.ALWAYSuse sharp
chisels, drills and blades. Maintain this tool in accordance with
these instructions and keep well lubricated (where appropriate).
Avoid using tools in temperatures of 10ºC or less. Plan your work
schedule to spread any high vibration tool use across a number of
days.
NOTE: The use of other tools will reduce the users’ total
working period on this tool.
HEALTH SURVEILLANCE
All employees should be part of an employer’s health surveillance
scheme to help identity any vibration related diseases at an early
stage, prevent disease progression and help employees stay in
work.
RESIDUAL RISKS
Even if you are operating this product in accordance with all
the safety requirements, potential risks of injury and damage
remain. The following dangers can arise in connection with
the structure and design of this product:
1. Injuries and damage to property due to broken attachments or
the sudden impact of hidden objects during use.
2. Danger of injury and property damage caused by ying objects
or poor power tool accessories.

19
18
ASSEMBLY
01 SYMBOLS
Read the instruction manual
Wear eye protection
Wear hearing protection.
Wear a dust mask.
Do not dispose of battery packs in rivers or immerse in water.
Do not dispose of battery packs in re. They will explode and
cause injury.
Do not expose battery packs to heat in excess of 40°C
For wood cutting
For metals cutting
Brushless motor
Keep Cool Battery Technology
Quick Change Accessory Technology
yyWxx Manufacturing date code: Year of manufacturing (20yy) and week
of manufacturing (Wxx)
The noise for the operator may exceed 80 dB(A) and ear protection measures are
necessary.
VIBRATION DATA
Cutting boards with the supplied saw blade ah,B= 11m/s²
Cutting wooden beams with the supplied saw blade ah,WB= 11.3m/s²
Uncertainty K=1.5m/s2
The declared vibration total values and the declared noise emission values have been
measured in accordance with a standard test method (EN62841-1/EN62841-2-11) and
may be used for comparing one tool with another; they may also be used in a preliminary
assessment of exposure.
WARNING! The vibration and noise emissions during actual use of the
power tool can differ from the declared values depending on the ways in
which the tool is used especially what kind of workpiece is processed; and
need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all
parts of the operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time).
RATING LABEL EXPLANATION
ERS18-Li = MODEL NUMBER E = ERBAUER
RS = RECIPROCATING SAW
18 = 18 V d.c.
Li = LITHIUM ION

21
20
SAW BLADES (B)
Different saw blades can be used with this product depending on the workpiece material.
WARNING! Always use saw blades according to the intended use! For
example, never use a saw blade intended for working on wood for working
on metal or vice versa!
Observe the technical requirements of this product (see section Technical
specications) when purchasing and using saw blades!
Some saw blades are very sharp and become hot during use! Handle them
carefully! Wear protective gloves when handling saw blades in order to
avoid injuries like burns and cuts!
Pull out and hold the tool-free blade change lever (10).
Insert a suitable saw blade (13) all the way into the blade socket (12) up to the stop and
release the lever (10).
NOTE: The blade can be tted and used in upwards or downwards going
direction.
Pull on the saw blade (13) to test that it is rmly located in place. It should not be possible
to pull it out.
Repeat the rst step above to remove the saw blade (13) and insert a new one if
required.
02 UNPACKING
Unpack all parts and lay them on a at, stable surface.
• Remove all packing materials and shipping devices, ifapplicable.
• Make sure the delivery contents are complete and free of any damage. If you nd that parts
are missing or show damage do not use the product but contact your dealer. Using an
incomplete or damaged product represents a hazard to people and property.
• Ensure that you have all the accessories and tools needed for assembly and operation. This
also includes suitable personal protective equipment.
WARNING! The product and the packaging are not children’s toys!
Children must not play with plastic bags, sheets and small parts! There is a
danger of choking and suffocation!
03 ASSEMBLING THE MACHINE
CHARGING YOUR BATTERY PACK
The battery has been shipped in a low charge condition. Charge it fully before rst use.
Refer to the charger instruction manual for the details.
TO REMOVE OR INSTALL THE BATTERY PACK (A1, A2)
Depress the battery pack release button to release and slide the battery pack out from
your tool. After recharge, slide it back into your tool. A simple push and slight pressure will
be sufcient.
BATTERY PACK POWER BAR
The Li-Ion battery pack (7) is equipped with a POWER BAR which is used to give an
indication of the battery pack’s remaining charge. Press the POWER BAR button (8) to
check battery charge as below. The LED will stay lit for approximately 5 seconds.
8
76-100% Charge
51-75% Charge
26-50% Charge
5-25% Charge
under 5% Charge
Flash On Off

23
22
WARNING! Always ensure the guide plate lays at on the workpiece
during operation! Do not try to make cuts with the product only held by hand!
PLUNGE CUTTING (F)
WARNING! Plunge cutting may be used only on soft materials such as
wood, gypsum plaster boards, etc.! Use only short saw blades!
Place the front edge of the guide plate (1) on the workpiece and switch the product on,
wait until it runs at full speed.
Press the product rmly against the workpiece and plunge the saw blade slowly into the
workpiece.
Continue to saw along the cutting line as soon as the complete surface of the guide plate
(1) rests on the workpiece.
POCKET CUTTING (G)
Use the following method to start a cut in the centre of the workpiece.
Use a suitable drill to drill a hole of at least 25 mm on the cutting line.
Insert the saw blade (13) that is tted to the product into the hole and ensure it does not
touch the workpiece.
Switch the product on and wait until it runs at full speed before moving the product.
WARNING! Always ensure the guide plate lays at on the workpiece
during operation! Do not try to make cuts with the product only held by
hand!
USE
01 INTENDED USE
This product is intended for cutting wood and similar material e.g. MDF and chipboard,
plastic and metal using the respective saw blade. The product must be used with the
guide plate laying at against the workpiece. It may not be used as a stationary product
on a work bench.
02 OPERATION
STROKE LENGTH ADJUSTMENT (C1-C4)
Adjust the stroke length according to the saw blade length and workpiece thickness;
always ensure that the saw blade extends beyond the workpiece throughout the stroke.
Pull out the tool-free guide plate adjustment lever (11) to unlock the guide plate (1).
Adjust the guide plate (1) to the required position.
Push the tool-free guide plate adjustment lever (11) back to secure the guide plate (1) in
position.
ON/OFF SWITCH (D)
Press the lock button (4) to the left then press the on/off button (5) to switch the product on.
To switch the product off just release the on/off button (5) When not in use, it is advised to
return the lock button to the locked position(fully right) to avoid accidental re-start.
SPEED CONTROL
The on/ off switch (5) is combined with a speed control. Adjust the speed directly with the
on/ off switch. The speed is controlled by how far the trigger switch is depressed.
AUTOMATIC LED WORK LIGHT (H)
The LED work light (2) will illuminate when the trigger switch is depressed slightly, and
will automatically turn off a short while after the trigger switch is released. This provides
additional light on the surface of the workpiece for operation in lower light situations.
CUTTING (E1-E4)
Insert the saw blade (13) according to the intended application.
Hold the product with one hand on the handle (6), and with the other hand on the
gripping surface (3).
Switch the product on and wait until it runs at full speed before placing it on the
workpiece.
Place the guide plate (1) at on the workpiece and move the product at an even speed.

25
24
CARE & MAINTENANCE
MAINTENANCE
Your tool requires no additional lubrication or maintenance. There are no user serviceable
parts in your power tool. Never use water or chemical cleaners to clean your power tool.
Wipe clean with a dry cloth.Always store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free of dust.
RECYCLING AND DISPOSAL
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer
for recycling advice.
For further information visit www.recycle-more.co.uk
DISPOSAL OF AN EXHAUSTED BATTERY PACK
To preserve natural resources, please recycle or dispose of the battery pack
properly. This battery pack contains Li-Ion batteries. Consult your local waste
authority for information regarding available recycling and/or disposal options.
Discharge your battery pack by operating your tool,then remove the battery pack
from the tool housing and cover the battery pack connections with heavy-duty
adhesive tape to prevent short circuit and energy discharge. Do not attempt to
open or remove any of the components.
REPAIR
This product does not contain any parts that can be repaired by the consumer. Contact an
authorised service centre or a similarly qualied person to have it checked and repaired.
STORAGE
• Switch the product off and remove the battery pack.
• Clean the product as described above.
• Store the product and its accessories in a dark, dry, frost-free, well- ventilated place.
• Always store the product in a place that is inaccessible to children.
• We recommend using the original package for storage or covering the product with a
suitable cloth or enclosure to protect it againstdust.
TRANSPORTATION
• Switch the product off and remove the battery pack.
• Attach transportation guards, if applicable.
• Always carry the product by its handle.
• Protect the product from any heavy impact or strong vibrations which may occur during
transportation in vehicles.
• Secure the product to prevent it from slipping or falling over.
OVERLOAD, TEMPERATURE AND CHARGING PROBLEM
Problem Tool/ Battery Status Possible cause Solution
Overload
protection
Product suddenly
Stops; The LED
work light (if tted) is
ashing
Extremely high torque,
binding and stalling
situations, overloading
of the tool
Relieve the load
immediately, reset the
tool by switching off and
back on again.
Temperature
extremely high
The rst and the
third LED light of the
POWER BAR will be
ashing alternately
Battery temperature
exceeds 77°C during
operation
Cool down the battery
to below 77°C for
operation and below
57°C for charging.
Low charge Power for the tool will
drop quickly; The rst
LED on the POWER
BAR begins to ash
The battery pack is
under 5% charge
Remove the battery
pack from the tool and
charge it
Other
problems
Short charges Not fully charged Make sure that the
battery is fully charged
every time by allowing
the charger to complete
its full charging cycle
Poor storage condition Always remove battery
from the tool and
charger when not
in use and store in
a dry secure place.
Avoid charging or
storing your battery in
temperatures below
5°C and above 40°C.
Cool down a hot battery
pack from a tool that
has just been operated
for approximately 30
minutes before storage

27
26
DECLARATION OF CONFORMITY
EU Declaration of Conformity
We
Kingsher International Products Limited
3 Sheldon Square
London W2 6PX
United Kingdom
Declare that the product:
Erbauer 18V cordless reciprocating saw ERS18-Li
Serial number 00001-99999
Complies with the essential health and safety requirements of the following directives:
2006/42/EC The Machinery Directive
References to the following harmonized standard were made:
EN 62841-1:2015
EN 62841-2-11:2016
2014/30/EU Electromagnetic Compatibility directive
References to the following harmonized standard were made:
EN55014-1:2017
EN55014-2:2015
(EU) 2015/863 amending 2011/65/EU Restrictions of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment
Authorised signatory and technical le holder:
Kingsher International Products Limited
3 Sheldon Square
London W2 6PX
United Kingdom
on: 18/06/2018
Lisa Davis
Group Quality Director
GUARANTEE
At Erbauer we take special care to select high quality materials and use manufacturing
techniques that allow us to create ranges of products incorporating design and durability.
That’s why we offer a 2 year trade guarantee against manufacturing defects on our
Erbauer power tool products.
This power tool is guaranteed for 2 years from the date of purchase, if bought in store,
delivered or bought online. You may only make a claim under this guarantee upon
presentation of your sales receipt or purchase invoice. Please keep your proof of
purchase in a safe place.
This guarantee covers product failures and malfunctions provided the Erbauer power
tool was used for the purpose for which it is intended and subject to installation, cleaning,
care and maintenance in accordance with standard practice and with the information
contained above and in the user manual. This guarantee does not cover defects and
damage caused by or resulting from:
• Normal wear and tear, including accessory wear
• Overload, misuse or neglect
• Repairs attempted by anyone other than an authorised agent
• Cosmetic damage
• Damage caused by foreign objects, substances or accidents
• Accidental damage or modication
• Failure to follow manufacturer’s guidelines
• Loss of use of the goods
This guarantee is limited to parts recognised as defective. It does not, in any case, cover
ancillary costs (movement, labour) and direct and indirect damage.
If the Erbauer power tool is defective during the guarantee period, then we reserve
the right, at our discretion, to replace the item with a product of equivalent quality and
functionality or to provide a refund.
This guarantee only applies to the country of purchase or delivery and is not transferrable
to any other countries. This guarantee is non-transferrable to any other person or
product. Relevant local law will apply to this guarantee.
Guarantee related queries should be addressed to a store afliated with the distributor
you purchased the Erbauer power tool from.
This guarantee is in addition to and does not affect your statutory rights relating to faulty
goods as a consumer.

Manufacturer • Fabricant • Producent • Hersteller • Producator • Fabricante:
Kingsher International Products Limited
3 Sheldon Square London W2 6PX
United Kingdom
www.kingsher.com/products
DISTRIBUTOR:
B&Q plc,
Chandlers Ford, Hants, SO53 3LE
United Kingdom
www.diy.com
Screwx Direct Limited,
Trade House, Mead Avenue,
Yeovil, BA22 8RT, United Kingdom
www.screwx.com
To view instruction manuals online,
visit www.kingsher.com/products