Erde 102.2 User manual

AB
ERDE
SACHET DE VIS / NUTS AND BOLTS CONTENT
x4 x4 x10 x4 x4
HM 10x25 HM 8x25 HM 8x20 EQUERRE
SQUARE HM 6x12
x4 x 8 x1
10 10 TRL 8x16
OUTILS NECESSAIRES POUR LE MONTAGE NON FOURNIS
NECESSARY TOOLS FOR ASSEMBLY. NOT PROVIDED
x1
13
17
10
1/6
COLIS/PACK COLIS/PACK
17
WWW.ERDE.EU
x1
10
NOTICE DE MONTAGE
ASSEMBLY INSTRUCTIONS
ERDE
- 102.2
ERDE
WEEK-END
DAXARA by erde
- 107.2
N 58419998/B
PORTER DES GANTS POUR LE MONTAGE.
IT IS RECOMMENDED TO WEAR GLOVES
FOR ASSEMBLY.
0.8 daN.m
1.8 daN.m
3.6 daN.m
6 daN.m
0.8 daN.m
x1
x1 x1
x1 x1 x2
x2 x1
x1

FR HM 10 10 HM 10x70
x1 x1 x1
HM 8x20
x2
B
C
C1: CLIPPER LE FAISCEAU
C2: JAUNE/YELLOW
C3: VERT/GREEN
2/6
A1: NE PAS BLOQUER LES FIXATIONS
B1: DEVISSER A FOND SANS DEMONTER
x4 HM 10x25
x4 10
A
DO NOT TIGHTEN NUTS AND BOLTS AT THIS STAGE
UNSCREW THE KNOB ENTIRELY WHILE KEEPING IT IN PLACE
CLIP THE WIRES
C4: BLOQUER TOUTES LES FIXATIONS
TIGHTEN ALL NUTS AND BOLTS

ECROU DE ROUE
D2: WHEEL NUT
x8
TRL 8x16
x1
DE
F
D1: FACE BOMBEE DE L'ECROU
CONTRE LA JANTE
E1
E2
CHEK THAT THE FRAME IS PROPERLY LOCKED
1
SERRER FERMEMENT
2
RETOURNER LA REMORQUE
SERRER LES ROUES
E4
3/6
POSITIONNER LA GOUPILLEE3
1 2 3
DOMED HEAT AGAINST
THE WHEEL RIM TURN UP THE TRAILER ON ITS WHEELS
TIGHTEN FIRMLY
PUT THE PIN IN PLACE
TIGHTEN THE WHEEL
E5: VERIFIER QUE LA CAISSE EST BIEN VERROUILLEE

HM 6x12
Qte: 2
HM 8x20
x2
HM 8x20
x2
H
G
4/6
G1: NE PAS BLOQUER LES FIXATIONS DES OPERATIONS SUIVANTES
DO NOT TIGHTEN NUTS AND BOLTS AT THE FOLLOWING STEPS

HM 6x12
x2
HM 8x20
x4
HM 8x25 K1:EQUERRE
SQUARE
x4 x4
J1: CLE A PIPE
NON FOURNIE
J
I
K
5/6
K2: PLAQUER L'EQUERRE
CONTRE L'AILE
BOX SPANNER
NOT SUPPLED
APPLY THE SPLICING PLATE
AGAINST THE MUDGUARD

6/6
L1: ERGOT
M1: BLOQUER TOUTES LES FIXATIONS
DES OPERATIONS PRECEDENTES
L
M
TIGHTEN ALL NUTS AND BOLTS
OF THE OPERATION ABOVE
PIN