ergoline Beauty Angel 7200 User manual

1024357-00 / en / 01.2020
Operating instructions
Ergoline Beauty Angel 7200
Translation of the original operating instructions

Legal notice
2/68
Legal notice
Manufacturer: JK-Products GmbH
Köhlershohner Straße 60
53578 Windhagen
GERMANY
Tel.: [phone] / 818-140
Fax: [phone] / 818-166
Customer service /
Technical service
(Spare part orders for
components):
JK-International GmbH,
Division JK-Global Service
Köhlershohner Straße 60
53578 Windhagen
GERMANY
Tel.: [phone] / 818-861
Fax: [phone] / 818-205
E-mail: [email protected]
Spare part orders for
consumables:
JK-International GmbH,
Division JK-Licht
Köhlershohner Straße 60
53578 Windhagen
GERMANY
Tel.: [phone] / 818-600
Fax: [phone] / 818-615
E-mail: [email protected]
DANGER!
Failure to observe these instructions:
• can result in serious injury and death,
• can result in damage to the device and the
environment.
– Read these instructions carefully before putting this
device into operation.
– Please observe the instructions and the code of con-
duct required to operate the device safely.
– Please make the instructions and additional information
from the manufacturer available to the personnel at
their workplace.
Copyright
The copyright remains with JK-Holding GmbH.
The contents may not be partially or completely duplicated, distributed or
utilized for competition purposes without authorisation or disclosed to other
parties.
The right to make technical changes in regard to the figures and information
contained in this instruction manual is reserved!

Table of contents
01/2020 1024357-00 Operating instructions – 3/68
Table of contents
1 Safety instructions and warnings................................................5
1.1 General ...........................................................................................5
1.1.1 Definitions .......................................................................................5
1.1.2 Symbol explanation.........................................................................6
1.2 Intended use ...................................................................................7
1.3 Foreseeable misuse........................................................................8
1.4 Beauty system safety information ...................................................8
1.4.1 Collagen device...............................................................................8
1.4.2 Important notes ...............................................................................9
1.4.3 Vibra Shape (Vibration plate) .......................................................... 9
1.5 Application times...........................................................................11
1.6 Safety instructions and warnings ..................................................12
1.6.1 Operator's obligations ...................................................................12
1.6.2 Personnel training .........................................................................12
1.6.3 Scope of delivery...........................................................................12
1.6.4 Transport, assembly and setup.....................................................12
1.6.5 Commissioning..............................................................................15
1.6.6 Operation and maintenance..........................................................15
1.6.7 Decommissioning..........................................................................16
1.6.8 Storage .........................................................................................16
1.6.9 Disposal ........................................................................................16
1.6.10 Directives ......................................................................................17
1.6.11 Export............................................................................................17
1.6.12 AUX (music, optional) ...................................................................17
1.6.13 Technical modifications.................................................................18
1.7 Signs and stickers on the device...................................................19
1.8 Warranty .......................................................................................23
1.9 Warranty and liability exclusions ...................................................23
2 Description ..................................................................................24
2.1 Scope of delivery...........................................................................24
2.1.1 Optional.........................................................................................24
2.2 Equipment.....................................................................................24
2.3 Device description.........................................................................25
2.4 Accessories (optional)...................................................................26
2.5 Functional description ...................................................................27
2.6 Description of the treatment programmes....................................28
2.7 AGEsmart and VibraShape...........................................................29
2.8 Description: vibration programmes ...............................................29

Table of contents
4/68
3 Operation .....................................................................................30
3.1 User safety information .................................................................30
3.2 Collagen device.............................................................................30
3.3 Application tips ..............................................................................31
3.4 Operating overview .......................................................................33
3.4.1 Navigation .....................................................................................34
3.5 Functions.......................................................................................35
3.6 Start...............................................................................................37
3.7 AUX (music) ..................................................................................38
4 Cleaning and maintenance.........................................................39
4.1 Safety instructions
when undertaking cleaning or maintenance work .........................39
4.2 Faults.............................................................................................40
4.3 Cleaning ........................................................................................40
4.3.1 Cleaning the surfaces....................................................................41
4.4 Lamps............................................................................................41
4.5 Cleaning plan ................................................................................42
4.6 Maintenance..................................................................................43
4.7 Maintenance plan..........................................................................43
4.8 Instructions for replacing the lamps...............................................47
4.8.1 Low pressure lamps ......................................................................48
4.9 Cleaning or replacing lamps in the doors ......................................49
4.10 Cleaning or replacing lamps on the side walls ..............................54
4.11 Cleaning the filters.........................................................................56
4.12 Cleaning the filter mats..................................................................57
4.13 Changing the AROMA canister .....................................................58
5 Technical data .............................................................................60
5.1 Power, connection rating and noise level......................................60
5.2 Dimensions....................................................................................61
5.3 Lamp sets......................................................................................62
5.3.1 Ergoline Beauty Angel 7200..........................................................62
5.4 Spare parts and accessories.........................................................63
6 Appendix......................................................................................64
6.1 JK timer controls............................................................................64
7 Index.............................................................................................65

Safety instructions and warnings
01/2020 1024357-00 Operating instructions – 5/68
1 Safety instructions and warnings
To ensure safe operation of the device, it is necessary to read the following
safety instructions and warnings carefully and comply with them.
The safety instructions summarized here are repeated in the corresponding
chapters, where necessary.
1.1 General
1.1.1 Definitions
Operator
Person who provides the devices described here to users on a commercial
basis. The operator is responsible for the correct operation of the device as
well as compliance with the maintenance intervals.
User
A person who uses the device at a commercial location.
Personnel
People who are responsible for the operation, cleaning and general mainte-
nance work and who instruct the users in the operation of the devices.
Electrician
A person with suitable professional training, knowledge, experience and
knowledge of the applicable regulations which enable them to identify and
avoid the dangers which can arise from working with electricity.
Authorized, trained and qualified personnel
Qualified staff from an external company who have been trained and author-
ized by the manufacturer to undertake assembly and maintenance work on
specific equipment.

Safety instructions and warnings
6/68
1.1.2 Symbol explanation
The following types of safety notices are employed in these operating instruc-
tions:
DANGER!
Type and source of hazard
This safety notice indicates the existence of a direct danger
to body and life.
DANGER!
Type and source of hazard
This safety notice warns of dangers to body and life which
are caused by electricity.
WARNING!
Type and source of hazard
This safety notice warns of machine, material or environ-
mental damage.
NOTE:
This symbol does not identify any safety notices, but pro-
vides additional information to better understand the pro-
cesses.

Safety instructions and warnings
01/2020 1024357-00 Operating instructions – 7/68
1.2 Intended use
This device provides cosmetic stimulation of the skin with red light (photo-bio-
stimulation). Further information can be found on pages 27 and 28.
This device is intended only for commercial use and not for private use.
Some people are not permitted to use the device, see page 8.
The device may not be used by people with reduced physical, sensory or
mental capabilities or who have insufficient experience and/or knowledge
without supervision. A person responsible for their safety must ensure, either
by supervision or instruction, that the device is used correctly and safely. If
there is any doubt, use of the device by such categories of people must be
forbidden!
This device is only to be operated with the specified lamps or their equivalent.
The usage times given in these operating instructions are valid only for the
specified lamp set.
Any other use shall be considered improper. The manufacturer cannot be
held liable for damage or injuries resulting from this. The operator bears the
sole risk for this.
Proper use also includes compliance with the manufacturer's instructions and
its operating and maintenance conditions. The device may only be operated,
maintained and repaired by people familiar with these tasks and who have
been informed of the dangers involved.
Vibra Shape Function
The vibration plate can be used additionally during the light application. The
vibration plate is used for muscle stimulation of healthy people. If required, the
vibration plate can also be operated independently of the lamps, but not when
in standby.
The vibration plate is not intended for medical applications!
The vibration plate should not be used by pregnant women or by people with
diseases and limited medical conditions. A list of the contra-indications can be
viewed on page 9.

Safety instructions and warnings
8/68
1.3 Foreseeable misuse
The following uses of the device are explicitly prohibited:
 The device is only to be used by one person at a time.
 People with a body weight of more than (150 kg) kg may not use the
device.
 Persons taking medication that increase light sensitivity should not use
this device. Review medication listings and labeling prior to use.
 Extending the specified application times can place excessive demands
on the skin due to the emitted light. A minimum period of 48 hours should
lapse between each 15-20 minute application.
 No other persons are permitted in the vicinity of the cabin when using the
device.
 ONLY NON-UV lamps may be used in this device!
 People under 18 years of age may not use the device.
1.4 Beauty system safety information
1.4.1 Collagen device
NOTE:
Extending the specified application times cannot place ex-
cessive demands on the skin due to the emitted light. How-
ever we recommend a 48 hour break after a 15-20 minute
treatment.
The following people are not allowed to use the equipment:
 Pregnant women
 People younger than 18
 People with epilepsy
 People with illnesses which cause light sensitivity
 People who take medication or herbal remedies which cause light sensi-
tivity (e.g. antibiotics, antirheumatic agents, antifungal agents or
St. Johns wort)
– Seek medical advice immediately if in doubt!

Safety instructions and warnings
01/2020 1024357-00 Operating instructions – 9/68
1.4.2 Important notes
An application is not recommended in the following circumstances:
 If you have utilized an oxygen facial pack in the last 24 hours,
 If your facial skin has been electronically tightened in the last 24 hours,
 If your skin has been scoured,
 If you have received a facial injection in the last 24 hours.
Behaviour before, during and after an application:
 During the application no other people may remain in the cabin, in partic-
ular no children.
 Remove all jewellery (including piercings) before the application.
 Remove cosmetics before using the device and do not use sun screen
products.
 Wear protective eyewear that limits or reduces the intensity of bright light
and these wavelengths during use.
 Always comply with the recommended application times.
1.4.3 Vibra Shape (Vibration plate)
Contra-indications
Risks of damage to health!
Vibrations can cause or aggravate health problems.
The following people are not allowed to use the equipment:
 Pregnant women
 People with DVT (Deep Vein Thrombosis)
 People with fresh wounds following an operation or surgery
 People with epilepsy
 People with acute illnesses / inflammations
 People with pacemakers
 People suffering from retinal detachment
 People with acute osteoporosis
People with the following illnesses may only use the device after con-
sultation with their doctor:
 Cardiovascular diseases
 Hip and knee implants
 Severe diabetes
 Severe migraine attacks
 Tumour diseases
 Gallstones or kidney stones
 Acute thrombosis
 Acute inflammation of the muscular-skeletal system
 New fractures to well-trained limbs
 New infections

Safety instructions and warnings
10/68
 Acute hernia / intervertebral disc diseases / spondylolysis
 Rheumatoid arthritis
 Arthritic or arthropathic conditions (joint diseases)
People with recently implanted intrauterine devices (contraceptive coils),
metal pins, screws or plates are also only to use the device after consultation
with their doctor.
Side effects
The use of the vibration plate may lead to the following side effects:
 Itching in regions of the body being trained
 Nausea and vertigo
 Rapid and brief drop in blood pressure
 Rapid hyperglycaemia in the event of diabetes
Diabetics should always have dextrose on hand! The side effects of nau-
sea, vertigo, drop in blood pressure and skin irritations are generally
harmless. Older users should be especially warned about the possibility
of vertigo and a sudden drop in blood pressure. People who have skin in-
juries such as blisters or wounds on the soles of their feet are not allowed
to use the vibration plate.

Safety instructions and warnings
01/2020 1024357-00 Operating instructions – 11/68
1.5 Application times
NOTE:
The vibration programmes each run for 10 minutes and can
be utilized simultaneously either with or independently of the
light application.
AGEsmart AGEsmart application – Treatment recommendations
Applications
per week
PROTECT
Light
15-20 min
Intensive
15-20 min
VITALIZE
Light
15-20 min
Intensive
15-20 min
RENEW
Light
15-20 min
Intensive
15-20 min
[Number] [Number ] [Number] [Number] [Number] [Number]
1st week 2 2 2 2 2 2
2nd week 2 2 2 2 2 2
3rd week 2 2 2 2 2 2
4th week 2 2 2 2 2 2
5th week 1 2 2 2 2
6th week 1 2 2 2 2
7th week 1 2 2
8th week 1 2 2
9th week 1 2
10th week 1 2
11th week 1
12th week 1
After the end of light
application:
1-2 x per month 1-2 x per month 1-2 x per month

Safety instructions and warnings
12/68
1.6 Safety instructions and warnings
1.6.1 Operator's obligations
As the operator you are responsible for providing clear operating, cleaning
and maintenance instructions and ensuring the intended use and the proper
operation of the device by means of training and instruction for the personnel.
Your operating instructions must enable the safe use and safe operation of
the device and take into account the characteristics and expertise of your
company and also the national work safety and environmental protection
regulations (within the European Union, the EU directive 89/391/EEC).
1.6.2 Personnel training
As the operator you are obliged to train your personnel and instruct them in
the established legal and accident prevention regulations. Ensure that your
personnel have understood and observe these operating instructions. This
applies in particular to the
 information in 'Intended use' and 'Foreseeable misuse'
 safety instructions in the 'Operation' chapter
 operating instructions
 cleaning and maintenance instructions
– Please make the instructions and additional information from the manu-
facturer available to the personnel at their workplace.
– Regularly check your personnel's safety consciousness and awareness
of the risks, taking into account your operating instructions.
– Please ensure that the cleaning intervals are complied with, in particular
cleaning after every application.
– Please ensure that your personnel provide your customers with appropri-
ate advice, in particular regarding application times, possible risks and
the operation of the device.
– People under 18 may not use the device. Please instruct your personnel
to check the customer's identification in the event of doubt.
1.6.3 Scope of delivery
Information regarding the scope of delivery is contained in the 'Description'
chapter on page 24.
1.6.4 Transport, assembly and setup
The device is delivered by a specialist company and assembled and set up by
the manufacturer's own service personnel or by an authorized service com-
pany.
As an operator you are responsible for complying with the on-site ventilation
and electrical requirements at the setup location, see page 13.

Safety instructions and warnings
01/2020 1024357-00 Operating instructions – 13/68
Assembly
DANGER!
Personal danger due to electric shock or burns!
– The assembly and electrical connection must comply
with the national regulations.
– The on-site electrical installation must be fitted with an
easily accessible all-pole isolating device (master
switch), complying with overvoltage category III. This
means that each pole must have a contact opening
width complying with the conditions of overvoltage cat-
egory III for full isolation.
– If the connection is established via a plug-in connection
then the connection system according to EN 60309
must be utilized.
–
A
ssembl
y
, installation, up
g
radin
g
or repair of the device
may only be carried out by specially trained and author-
ized personnel.
Information regarding the disassembly and assembly of the device is availa-
ble in the separate assembly instructions. These assembly instructions are
intended solely for use by the manufacturer's service personnel or by qualified
specialists authorized by the manufacturer.
Ventilation
WARNING!
Risk of overheating due to air flow problems!
Operating faults possible.
– Do not change, obstruct or block the air inflow and
outflow to the device or make any unauthorized chang-
es to the device. The manufacturer shall bear no liabilit
y
for damage or injuries resulting from such actions.
– Observe the ventilation system data.
– Do not set up and operate the device on the transport
pallet!
> 32°C 15-32°C
> 89,6°F 59-89,6°F
Data regarding the air supply and ventilation planning is available in the plan-
ning manual (www.ergoline.de, available in English and German). You can
also obtain this data from your dealership or the customer service department
(see page 2).

Safety instructions and warnings
14/68
Setup location
WARNING!
Salty air! Contaminated air!
Device damage due to corrosion of the housing and electri-
cal components.
– Do not install the device at swimming pools.
– Do not operate the device in locations with aggressive
environmental conditions (e.g. air containing chlorine).
Damage to device possible!
Where there are great differences in temperature between
the transport route and the installation site the device may
not be put into operation immediately after being set up.
– Wait at least 2 hours before connecting the device to
the power supply.
Risk of overheating due to air flow problems!
Operating faults possible.
– Do not change, obstruct or block the air inflow and
outflow to the device or make any unauthorized chang-
es to the device. The manufacturer shall bear no liabilit
y
for damage or injuries resulting from such actions.
– Observe the ventilation system data.
– Do not set up and operate the device on the transport
pallet!
Environmental conditions
 Optimum ambient temperature: Between +15 °C and +32 °C
 Storage temperature: Between -15 °C and +60 °C
The device is not to be used outdoors.
Adaptation of the unit is required for operating altitudes greater than 2000 m
above sea level in order to guarantee trouble-free operation.
The device is not suitable for operation in mobile facilities (ships, buses,
trains). Adaptation of the unit is required in order to guarantee trouble-free
operation when used in mobile facilities.
Please contact the customer service department without fail before putting the
device into operation - see page 2.

Safety instructions and warnings
01/2020 1024357-00 Operating instructions – 15/68
1.6.5 Commissioning
DANGER!
Damaged mains power cable!
Danger to persons through electric shock or burns.
– Only the manufacturer or specialist companies are
permitted to replace the mains power cable.
Initial commissioning will be undertaken by the manufacturer's own service
personnel or by an authorized service company. The device will be handed
over ready for use.
If the device has not been used for a longer period of time, then it must first
be inspected by our customer service department or by another authorized
company before being put back into operation again.
The device is operated with an external time-control unit.
A time control unit must be attached so that the device automatically switches
off at the latest after <110 % of the selected running time even if the controller
fails. The device running time must be secured with a timer control that com-
plies with the standard EN 60335-2-27).
Dependent on the local power supply company, the devices can transmit
interference to the power system of the building that impair the audio-
frequency remote control system used by the power supply company. This
can, for example, interfere with the function of night-storage heaters.
If faults occur due to the operation of the devices, then the operator is re-
sponsible for the installation of an audio frequency blocking device in the
building electrical installation. Please contact your electrician. The electrician
is familiar with the technical connection conditions of your local utility compa-
ny so that the audio-frequency blocking device can be matched to the power
system of your power supply company.
1.6.6 Operation and maintenance
Error-free operation, maintenance and service are required in order to ensure
that the health and safety of the users is not endangered during operation and
to ensure that the device is in a fault-free operating condition.
Please observe the information and recommendations provided in these op-
erating instructions. Please ensure that the intervals for the inspection,
maintenance and service are complied with. Please ensure that the lamps are
replaced after the specified usage time.
Unauthorized modifications and changes to the device and its control unit are
prohibited. Failure to comply with this invalidates the operating licence!
To avoid hazards, the device must not be used if the mains power cable is
damaged. A damaged mains power cable must be replaced by the manufac-
turer or their customer services, or by trained and qualified specialist person-
nel.

Safety instructions and warnings
16/68
1.6.7 Decommissioning
The device must be disconnected from the power supply in order to tempo-
rarily or permanently decommission it.
You must abide by the legal disposal requirements when permanently de-
commissioning the device.
1.6.8 Storage
Store the devices in a dry location with a stable temperature. Once the device
has cooled off, pack it in plastic wrapping to protect it against scratches.
 Storage temperature: Between -15 °C and +60 °C
1.6.9 Disposal
Environmental regulations –
disposal of lamps and batteries
Lamps contain fluorescent materials and other waste containing mercury.
Batteries contain heavy metal compounds.
Within the European Union the national implementation of the Waste Frame-
work Directive 2018/851/EG applies. According to the national waste disposal
laws and in accordance with the municipal waste regulations, proof must be
provided of the proper disposal of lamps and batteries.
Your local sales agency will be happy to assist you with the disposal of lamps
and batteries:
– Inform your local agency of the number of lamps and batteries by tele-
phone or in writing.
The agency will then provide you with the name of a free delivery point for
your lamps or will take care, in conjunction with a disposal company, of the
collection and proper disposal of the lamps. This service is available for a fee.
Outside Germany, the respective national legislation applies. Please contact
your local sales agency.
Packaging
All packaging consists of 100 % recyclable materials. Packaging brought into
circulation by the JK Corporate Group that is no longer required can be re-
turned to the JK Corporate Group. Your partner agency or dealer will be hap-
py to advise.
Disposal of old devices
The device has been manufactured using recyclable materials. The JK Corpo-
rate Group will provide you with information on the content or potential haz-
ards of the materials used.
The manufacturer is obliged to take back and dispose of certain electrical and
electronic components in accordance with the 2012/19/EC Directive.

Safety instructions and warnings
01/2020 1024357-00 Operating instructions – 17/68
The components and devices are labelled with the following symbol:
The device will, if requested, be properly disposed of by the JK Corporate
Group. This service is available free of charge. Your partner agency or dealer
will be happy to advise.
Registration numbers
Companies within the JK Corporate Group are registered as manufacturers in
Germany and accept all obligations in respect of the German Electrical and
Electronic Equipment Act.
Registry number JK-International GmbH, division JK-Licht GmbH (lamps):
WEEE-DE 61515020
Registry number JK-Products GmbH (Devices): WEEE-DE 62655951
1.6.10 Directives
See the included EC Declaration of Conformity.
1.6.11 Export
We emphasize that these devices are only intended for the European market
and must not be exported to or operated in other countries e.g. the USA or
Canada! The manufacturer does not accept any liability in the event of non-
observance! We explicitly emphasize that non-compliance may result in high
liability risks for the exporter and/or the operator.
1.6.12 AUX (music, optional)
If an MP3 player or a smartphone is used privately during the application,
then this does not constitute a public performance in the sense of copyright
law, so that no reporting or fee obligation exists on the part of the studio oper-
ator towards the organisation responsible for issuing the commercial perfor-
mance rights.
For the public use of MP3 music files, the same legislation applies as for all
other music sources: As a studio operator/studio owner, you may only play
original audio CDs, MCs, audio DVDs etc., on your premises and/or play
music via the 'MP3-music modules' which are provided in the devices from
JK-International GmbH if you have acquired the necessary stage rights. You
can acquire these from the organisation responsible for issuing commercial
performance rights in your country (in Germany: GEMA/GVL).
Copy-protected audio CDs, MCs, audio DVDs etc., as well as titles contained
on these media, may not be converted to MP3 format and/or saved on HDD,
audio CDs, MCs, audio DVDs etc., if software is used to do this, which disa-
bles or circumvents the copy-protection contained on the media.
You must be ready at any time to prove your granting of stage rights by
presentation of the appropriate stage rights certificate when requested by a
representative or another controlling body of the responsible organisation.
As long as you observe all the listed instructions and have acquired the nec-
essary rights for use of the 'MP3-music module', you may convert your origi-
nal audio CDs, MCs, audio DVDs etc. into the MP3 format required by the
player. Only one copy (duplicate or MP3 format conversion) of lawfully ac-
quired audio CDs, MCs, audio DVDs etc. may be made. The source media
(original media) must be retained and may not be used simultaneously.

Safety instructions and warnings
18/68
Further details can be found in the information brochure 'Audio Guide' availa-
ble on the Internet at http://www.jk-globalservice.de .
NOTE:
Pre-recorded SD cards which are delivered as accessories
for a JK audio system are also subject to payment obligation
for commercial usage.
1.6.13 Technical modifications
The device has been constructed in accordance with the current state of the
art and the applicable safety regulations. The illustrations and specifications in
these operation instructions are subject to technical modifications which are
required in order to improve the device.
Unauthorized modifications and changes to the device and its control unit are
prohibited. Failure to comply with this invalidates the EC conformity!
Please use only original spare parts. Failure to comply with this invalidates
the EC conformity!

Safety instructions and warnings
01/2020 1024357-00 Operating instructions – 19/68
1.7 Signs and stickers on the device
Danger area warning signs and important information about components are
attached to the device. The signs shown below are examples. Ensure that the
warning signs are always clearly recognisable and legible. Any missing warn-
ing signs or stickers must be replaced.
1
3
2
5
7
4
6
19602 / 0
1: Type plate
11991 / 2
The nameplate is located on the upper left of the lamp cover. It contains im-
portant information for identifying the device (e. g. the serial number = Serial-
No.).

Safety instructions and warnings
20/68
2: Warning sticker (1511942-..)
The sticker is located on the lamp covering on the right side section.
This sticker also includes the language form 1512793-.. (see accessories
Technical Documentation).
3: Sticker EMERGENCY OFF (1018687-..)
18465 / 1
This sticker also includes the language form 1018688-.. (see Technical Doc-
umentation folder).
4: Maintenance instruction sticker (800701-..)
XXXXXXXXXXXX
XXXXXXXXXXXX