Ergomotion Motiondesk User manual

Motiondesk® Users Guide-Rev B
Welcome!
Congratulations on your purchase of this motiondesk®-electric height adjustable sit to stand
ergonomic desk. With this desk you can adjust the work surface easily, quickly and effortlessly
to your personal needs and tasks.
The motiondesk has many features which are easy to use. This guide provides guidelines on
using your desk and setting it up for your personal use.
Warning
To prevent fire or shock hazard, do not expose the desk to water or moisture.
To avoid electrical shock, do not open the control box. Refer servicing to Ergomotion Pty Ltd.
Main Features: -
•Push button electric adjustment.
•Height range from sit to stand
•Quick, quiet and easy adjustment
•Memory positions available (optional)
Usage instructions: -
Desk without memory option
Your desk has been supplied with a panel that has an up and down buttons only.
1. Plug the mains power into the mains
2. Turn plug on
3. Operate desk up and down with the up down buttons
4. Initialization may be required. See guideline at the end of this guide
Desk with memory panel (without LCD readout)
Setting memory positions
1. Drive the table to its lowest position to initialise the system if necessary (see below).
2. Adjust table to desired height using the ‘Parallel Up” and “Parallel Down” buttons.
3. Press “Store” then “Memory 1”
Memory position “1” is now stored.
4. Repeat steps 1 and 2 for positions “1” and “2”.
Recalling memory position.
1. Press “Memory 1” and hold until desk reaches stored position and stops.
2. Press “Memory 2 or 3” until desk reaches these memory positions and stops.
Memory positioning can be bypassed by pressing “Memory Up” or “Memory Down” until the
correct position is reached.

Desk with memory panel (with LCD readout)
Normal Operation:
To run the table up or down, press the “Parallel Up” or “Parallel Down” button, and keep it
pressed until the table reaches your desired height. The display will count up or down while
running, and after it stops will continuously show the current height of the table.
Store a memory position:
1. Run the desk to the desired height.
2. Press the “Store” button and the display will flash “S” for 2 seconds.
3. Within the 2 seconds press “Memory 1, 2 or 3. The position is now stored.
4. To abort the sequence press the “up” or “Down” whilst the “S” is flashing, or wait 2
seconds until the display automatically returns to show the height of the table.
Recalling a memory position:
1. Press and hold the "memory 1" button until desk reaches stored position and stops.
2. Repeat previous step for memory position 2 and 3.
3. Memory positions can be bypassed by pressing the "parallel up" or "parallel down"
buttons.
Adjusting the display to show the correct height:
Adjusting initial height
It may be necessary to adjust the displayed height due to different thicknesses of desktops. As
a standard it will show 68cm as the default height of the desk.
1. Press /\ and \/ keys at the same time and keep them pressed for 5 seconds. The display
will show three minuses (---) and then the display will revert to showing the height.
2. The height can then be adjusted by either /\ or \/ until the desired height has been
reached.
3. The system will return to normal operation (and give a short blink) after 5 seconds of
inactivity on the keys.
Desk with Bluetooth, memory and reminders (DPG1C)
See following link to download information on setting up and details on this desk panel: -
https://ergomotion.com.au/wp-content/uploads/2019/11/Desk-panels-DP1G-and-Desk-Control-
App-User-Manual.pdf

Guidelines to set up the desk to suit yourself: -
Creating an ergonomically sound workstation is the most important aspect of keeping a healthy
work style. Using the guidelines described here you can create a comfortable and healthy work
environment. This covers how your desk and chair should fit with your working environment.
1. Firstly your chair height should be adjusted so that your feet are flat on the floor and your
thighs are parallel to the floor.
2. Adjust your desk height so that your shoulders are relaxed with your forearms resting on
the desk.
3. Small height adjustments can be made to suit the task being done.
4. When you want to stand adjust the desk to your standing height. As above adjust the
height so that your shoulders are relaxed with your forearms resting on the desk.
5. Small height adjustments can be made to suit the task being done while standing.
6. Adjust your working position between standing and sitting throughout the day to gain the
maximum befits from your desk as well as creating a healthy, productive and enjoyable
working environment. Troubleshooting Guide
Symptom
Check
Try
The desk does not run
Is the mains connected to
the control box?
Connect a lamp or something
similar to check the mains supply is
OK.
Are all the plugs mounted
correctly in to the control
box and to the legs?
Check all connections.
Is there any visible damage
to the cables, controls,
control box or legs?
Damaged parts must be
exchanged-contact Ergomotion.
The desk stops and can
only be run in the opposite
direction
Is the desk in the fully
extracted position?
When the desk has reached is
upper position it can only run down
again.
Is there extra load on the
desk compared to when it
was running normally?
Remove some of the load and try
again.
The desk will only run
downwards even though
the desk is not overloaded
Perform initialization procedure.
The desk does not run its
full extension. It always
stops at the same position
The system has set a new end stop
position. Perform the initialization
procedure to remove this stop.
Initialization of your desk: -
Initialization is only necessary if control boxes are changed or the desk loses its memory
position.
1. Push the arrow down button until the desk will run to its lowest position.
2. Press the “Down” button again for 6 seconds, after the desk has reached its bottom
position.
3. The desk will lower and rise a few mm during these 6 seconds.
4. The desk has now been initialized and can be used normally again.
Enjoy your desk
Ergomotion Pty Ltd
PO Box 234
East Bentleigh
VIC, 3165
(t) 03 9579 1454
(e) [email protected]
(w) www.ergomotion.com.au