Steelcase Avenir Movable Walls PAB-9 Joining Panels User manual

If you have a problem, question,
or request, call your local dealer,
or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people
who want to help you.
(Outside the U.S.A., Canada,
Mexico, Puerto Rico, and the
U.S. Virgin Islands, call:
1.616.247.2500)
Or visit our website
www.steelcase.com
Si vous avez un problème, question,
ou la demande, appellent votre
revendeur local, ou
Ligne 1 de Steelcase à
888.STEELCASE (888,783,3522)
pour l'action immédiate par les
personnes qui veulent vous aider.
(en dehors des Etats-Unis, Canada,
Le Mexique, Porto Rico, et
Les ÉTATS-UNIS. Les Îles Vierges,
appel: 1,616,247,2500)
Ou visiter notre website
www.steelcase.com
Si usted tiene un problema, pregunta,
o la petición, llama a su distribuidor
local, o Línea 1 de Steelcase en
888.STEELCASE (888,783,3522)
para la acción inmediata por la
gente que desea ayudarle.
(fuera de los E.E.U.U., Canadá,
Méjico, Puerto Rico, y Los E.E.U.U..
Islas de la Virgen, llamada:
1,616,247,2500)
O visite nuestro website
www.steelcase.com
©1998 Steelcase Inc.
Rapids Grand, MI 49501
U.S.A.
Les ETATS-UNIS.
Los E.E.U.U.
Printed in U.S.A.
Imprimé aux Etats-Unis.
Impreso en los E.E.U.U.
Avenir
Movable Walls
Model: PAB - 9 Joining Panels of the same height
®
1
of
4
939500736 Rev A
®
3/16” Allen Wrench

2
of
4
939500736 Rev A
FOR STANDARD AND POWER PANELS
1. Remove the top cap by gripping at one end and
liftingstraight up. Refer to Fig A.
FOR POWER PANELS ONLY
1a. Remove tape and slide end cap downinto
place. Refer to Fig B
2. Lay panel “B” on its side. Next secure attaching
bracket to panel “B” with bolts. Refer to Fig C.
FIG A
FIG C
FIG B
TOP CAP
TWO PANEL
ATTACHING
BRACKET
THREE PANEL
ATTACHING
BRACKET
BOLT
PANEL B

3
of
4
3.
4.
3. Lay panels “A” or “C” onto its side. Install pins
into panel assembly. Refer to Fig D.
4. Stand panels upright. Next position panels
together and insert pins into attaching bracket
holes. Refer to Fig. E.
FIG D
FIG E
PIN
PANELS A OR C
PANEL A
PANEL C
PANEL B
939500736 Rev A

4
of
4
939500736 Rev A
5. Position attaching bracket on top of panels and
secure with (4) bolts for a three panel combination.
Refer to Fig. G.
6. (For Power and Standard Panels)
When replacing the top cap, press top cap reveal
sides inward at one end and slide top cap down
over reveal sides.
PANEL A PANEL A
PANEL C
ATTACHING
BRACKET
BOLT
5.
6.
TOP CAP