Ergon Crafco SUPER SHOT 125 User manual

Parts Manual - 26635N
Revision E
SUPER SHOT 125 DIESEL COMPRESSOR
70CFM EU ME LT ER

Fill in appropriate fields that apply to this machine
Machine S/N: ________________________________
Hose S/N: __________________________________
Wand S/N: _________________________________
Pump S/N: _________________________________
Engine S/N: ________________________________
Compressor S/N: _____________________________

Super Shot 125 DC 70CFM EU Part Manual
Revisions
Revision
Date
0) Initial Release
1/29/2020
A) Added part number for flow control cartridge valve, Fig 9-10, Table 9-10.
Added information for changing heat transfer oil, section 6.16, table 6-9,
Fig. 6-2
5/05/2020
B) Updated control box part number and schematics
8/3/2020
C) Updated Table 6-5 General Maintenance Parts and Engine parts list
9/2/2020
D) Added Ultra-Low Sulfur note to the diesel, changed to low idle on start
up. Fuel tank changed to a FMCSA compliant tank, updated tables, and
figures (9-1, 9-2, 9-3, 9-16 and 9-17). Added 47247N and 47277N
shoebox covers to the parts list.
5/6/2021
E) Corrected a typo in the material pump troubleshooting Table 8-23 (2a).
Added burner fuel filter change in Table 6-2. Switched to the SS Flex
Boom, added parts breakdown. Added flex boom features to the
maintenance chapter.
1/3/2022

Super Shot 125 Diesel Compressor 70 CFM EU Melter
PN 48300N

Super Shot 125 DC 70CFM EU Part Manual
Table of Contents
1.0 About This Manual.................................................................................................................. 1-1
1.1 How to use this manual....................................................................................................... 1-1
2.0 Safety Precautions.................................................................................................................. 2-1
2.1 General Safety.................................................................................................................... 2-1
2.2 Personal Safety................................................................................................................... 2-1
2.3 Equipment or Operational Safety......................................................................................... 2-1
2.4 California Proposition 65 ..................................................................................................... 2-2
All Crafco, Inc. Equipment........................................................................................... 2-2
All Crafco, Inc. Equipment using a diesel engine......................................................... 2-2
2.5 Towing or Driving for Transporting with Burner On.............................................................. 2-2
2.6 Safety Symbols and Notices................................................................................................ 2-3
3.0 Limited Warranty..................................................................................................................... 3-1
3.1 Warranty Claim Instructions................................................................................................. 3-2
4.0 Machine Specifications ........................................................................................................... 4-1
5.0 Operating Instructions............................................................................................................. 5-1
5.1 Preparing the Machine for Start Up ..................................................................................... 5-1
5.2 Machine Start Up................................................................................................................. 5-3
5.3 Air Compressor................................................................................................................... 5-5
5.4 About the Heated Hose, Wand, Valve, and Tip Guard......................................................... 5-6
5.5 Operating the Electric Hose................................................................................................. 5-7
5.6 Dispensing the Material....................................................................................................... 5-8
5.7 About the Active Screen Pump Protection........................................................................... 5-8
5.8 Loading Material into the Sealant Tank ............................................................................... 5-9
Material Tank Depth Chart......................................................................................... 5-10
5.9 Shutting Down and Cleaning Out the Machine .................................................................. 5-11
5.10 Storing the Electric Hose for Transport............................................................................ 5-12
5.11 Overnight Heater Use...................................................................................................... 5-13
5.12 Mounting a Skid Machine................................................................................................ 5-14
5.13 Shot Timer Option........................................................................................................... 5-15
5.14 Storing the Machine ........................................................................................................ 5-15
6.0 Maintenance Instructions........................................................................................................ 6-1
6.1 Engine................................................................................................................................. 6-1
6.2 Air Compressor ................................................................................................................... 6-1
6.3 Hydraulic System ................................................................................................................ 6-1

Super Shot 125 DC 70CFM EU Part Manual
Table of Contents
6.4 Heat Transfer Oil.................................................................................................................6-1
6.5 Material Sensor Tube ..........................................................................................................6-1
6.6 Cleaning Material Tank and Sensor Area ............................................................................6-2
6.7 Temperature Control Calibration..........................................................................................6-3
6.8 Cleaning the Melter .............................................................................................................6-3
6.9 Maintenance Chart..............................................................................................................6-4
6.10 Service Instructions ...........................................................................................................6-5
6.11 General Maintenance Parts...............................................................................................6-5
6.12 Recommended Spare Parts...............................................................................................6-6
6.13 Recommended Fluids and Lubricants................................................................................6-7
6.14 Applicable Brands of Heat Transfer Oil..............................................................................6-8
6.15 Typical Heat Transfer Oil Specifications ............................................................................6-8
6.16 Changing the Heat Transfer Oil.........................................................................................6-9
6.17 Material Pump Replacement............................................................................................6-10
6.18 Flex Boom Adjustment.....................................................................................................6-22
Strut Adjustment........................................................................................................6-22
Locked Position of the Flex Boom..............................................................................6-22
Grease Zerk...............................................................................................................6-23
Boom Swing Adjustment Nut.....................................................................................6-23
6.19 Wand Repair Instructions ................................................................................................6-24
Cable Replacement...................................................................................................6-24
Switch Replacement..................................................................................................6-24
Terminal Block Replacement.....................................................................................6-24
Wand Handle Replacement.......................................................................................6-25
6.20 Burner Fuel Filter Replacement.......................................................................................6-28
7.0 How to Use a Multimeter.........................................................................................................7-1
7.1 Checking DC Voltage with a Multimeter...............................................................................7-1
7.2 Checking AC Voltage with Multimeter..................................................................................7-1
7.3 Checking Resistance (Ohms)..............................................................................................7-1
How to Check Wire Continuity .....................................................................................7-1
How to Check RTD Sensor..........................................................................................7-1
7.4 Checking Amperage............................................................................................................7-2
8.0 Troubleshooting......................................................................................................................8-1
8.1 Diesel Burner Troubleshooting ............................................................................................8-1
Symptoms: Burner will Not Ignite.................................................................................8-1

Super Shot 125 DC 70CFM EU Part Manual
Table of Contents
Burner Electrical Troubleshooting................................................................................ 8-2
Excessive Smoke Coming Out of Exhaust Stack......................................................... 8-7
Burner Lights but Shuts Down After 15 Seconds......................................................... 8-7
Testing DC Controller.................................................................................................. 8-8
Burner Fuel Solenoid Testing...................................................................................... 8-8
Burner Ignition Coil Testing ......................................................................................... 8-9
Bleeding the Burner..................................................................................................... 8-9
Sealant is Heating Slowly.......................................................................................... 8-11
8.2 Mixer Troubleshooting....................................................................................................... 8-12
Symptom: Mixer Does Not Rotate ............................................................................. 8-12
Mixer Electrical Troubleshooting................................................................................ 8-13
Mixer Hydraulic Troubleshooting ............................................................................... 8-17
8.3 Hose Troubleshooting ....................................................................................................... 8-20
Symptom: Hose Does Not Heat................................................................................. 8-20
Hose Electrical Troubleshooting................................................................................ 8-20
Symptom: Trigger is not Working............................................................................... 8-25
RTD Sensor Ohms vs. Temperature ......................................................................... 8-26
8.4 Pump Troubleshooting ...................................................................................................... 8-28
Symptom: Material Does Not Dispense When the Pump is Activated........................ 8-28
Pump Electrical Troubleshooting............................................................................... 8-29
Pump Hydraulic Troubleshooting............................................................................... 8-35
8.5 DPF and Regen Modes..................................................................................................... 8-36
8.6 Icons for the Regen Modes ............................................................................................... 8-37
8.7 Engine Diagnostic Trouble Codes (DTC)........................................................................... 8-38
How to use the Diagnostic Trouble Code Table......................................................... 8-38
Engine DTC Table (48000N)..................................................................................... 8-38
9.0 About the Illustrated Parts List ................................................................................................ 9-1
9.1 Ordering Crafco Parts ......................................................................................................... 9-1
9.2 Super Shot 125 Diesel (70 CFM) Compressor Melter Skid................................................... 9-2
9.3 Tank Assembly.................................................................................................................... 9-8
9.4 Control Box Assembly, PN 47252N................................................................................... 9-10
9.5 Engine Assembly: PN 48000N .......................................................................................... 9-12
9.6 Hydraulic Control Valve Assembly: PN 45420................................................................... 9-16
9.7 Material Flow Control Assembly: PN 46060....................................................................... 9-18
9.8 Pump/Mixer Motor Assembly: PN 44832........................................................................... 9-20

Super Shot 125 DC 70CFM EU Part Manual
Table of Contents
9.9 Diesel Burner Assembly: PN 46380...................................................................................9-22
9.10 Hydraulic Diagram: PN 26663 .........................................................................................9-24
9.11 Diesel Fuel Line Schematic .............................................................................................9-30
9.12 Electrical Schematic ........................................................................................................9-34
9.13 Air Compressor Assembly: PN 45345..............................................................................9-36
9.14 Hydraulic Compressor Valve Assembly: PN 45425 .........................................................9-38
9.15 High Output Air Lance PN: 47483N (standard)................................................................9-40
9.16 High Output Air Lance with Water Separator PN: 47491N (optional) ...............................9-41
9.17 Wand Assembly PN 52200..............................................................................................9-42
9.18 Super Shot Flex Boom.....................................................................................................9-44
9.19 Engine Cover Assembly PN: 48120N (optional)...............................................................9-46
9.20 Hot Air Lance (optional)...................................................................................................9-48
10.0 Tools and Accessories........................................................................................................10-1

Super Shot 125 DC 70CFM EU Part Manual
List of Figures
Fig. 5-1 Hydraulic Fluid Level and Temp. Gauge.......................................................................... 5-2
Fig. 5-2 Heat Transfer Oil Dip Stick............................................................................................... 5-2
Fig. 6-1 Temperature Control Calibration...................................................................................... 6-3
Fig. 6-2 Heat Transfer Oil Drain and Fill Ports .............................................................................. 6-9
Fig. 6-3 Agitator and Pump Shaft Alignment............................................................................... 6-10
Fig. 6-4 Removal of Motor Mount Assembly ............................................................................... 6-11
Fig. 6-5 Supporting the Agitator Away from the Material Pump................................................... 6-12
Fig. 6-6 Unbolting the Material Pump.......................................................................................... 6-13
Fig. 6-7 Cleaning of the Pump Mounting Plate............................................................................ 6-14
Fig. 6-8 Pump Drive Shaft Dry Fit to Material Pump.................................................................... 6-15
Fig. 6-9 New Material Pump Mounting........................................................................................ 6-16
Fig. 6-10 Agitator Shaft and Paddles Mounting........................................................................... 6-17
Fig. 6-11 Pump Shaft Placement................................................................................................ 6-18
Fig. 6-12 Pump Shaft to Hydraulic Pump Motor Placement ........................................................ 6-19
Fig. 6-13 Agitator Connecting Link.............................................................................................. 6-20
Fig. 6-14 Agitator Chain Tightening Steps................................................................................... 6-21
Fig. 6-15 Flex Boom Adjustment................................................................................................. 6-22
Fig. 6-16 Switch Wire Location ................................................................................................... 6-25
Fig.6-17 Wire Routing................................................................................................................. 6-25
Fig.6-18 Terminal Block Wiring................................................................................................... 6-26
Fig.6-19 Actuator Spring Location............................................................................................... 6-26
Fig.6-20 Actuator / Trigger Assembly.......................................................................................... 6-27
Fig. 7-1 Standard Multimeter......................................................................................................... 7-2
Fig. 7-2 Clamp –On Amp Meter/Multimeter.................................................................................. 7-3
Fig. 8-1 Diesel Burner Schematic ................................................................................................. 8-6
Fig. 8-2 Diesel Burner Electrode Adjustment .............................................................................. 8-10
Fig. 8-3 Diesel Burner Air Settings.............................................................................................. 8-10
Fig. 8-4 Checking Din Plug Voltage ............................................................................................ 8-15
Fig. 8-5 Mixer Schematic............................................................................................................ 8-16
Fig. 8-6 Hydraulic Valve Pressure Setting................................................................................... 8-18
Fig. 8-7 Din Plug Layout ............................................................................................................. 8-19

Super Shot 125 DC 70CFM EU Part Manual
List of Figures
Fig. 8-8 Junction Box Voltage Testing.........................................................................................8-22
Fig. 8-9 Hose Circuit Schematic..................................................................................................8-23
Fig. 8-10 Junction Box Wiring .....................................................................................................8-24
Fig. 8-11 Pump Schematic..........................................................................................................8-34
Fig. 8-12 Engine Control Display DTC ........................................................................................8-38
Fig. 9-1 Super Shot 125 Diesel (70 CFM) Compressor Melter Skid...............................................9-2
Fig. 9-2 Super Shot 125 Diesel (70 CFM) Compressor Melter Skid (continued).............................9-4
Fig. 9-3 Super Shot 125 Diesel (70 CFM) Compressor Melter Skid (continued).............................9-6
Fig. 9-4 Tank Assembly: All Models..............................................................................................9-8
Fig. 9-5 Control Box Assembly, PN 47252N................................................................................9-10
Fig. 9-6 Engine Assembly: PN 48000N.......................................................................................9-12
Fig. 9-7 Engine Assembly: PN 48000N (continued) ....................................................................9-14
Fig. 9-8 Hydraulic Control Valve Assembly: PN 45420................................................................9-16
Fig. 9-9 Material Flow Control Assembly: PN 46060 ...................................................................9-18
Fig. 9-10 Pump/Mixer Motor Assembly: PN 44832......................................................................9-20
Fig. 9-11 Diesel Burner Assembly: PN 46380.............................................................................9-22
Fig. 9-12 Hydraulic Diagram: PN 26663......................................................................................9-24
Fig. 9-13 Hydraulic Diagram: PN 26663 (continued)...................................................................9-26
Fig. 9-14 Hydraulic Diagram: PN 26663 (continued) ...................................................................9-28
Fig. 9-15 Diesel Fuel Line Schematic..........................................................................................9-30
Fig. 9-16 Diesel Fuel Line Schematic (continued).......................................................................9-32
Fig. 9-17 Electrical Schematic.....................................................................................................9-34
Fig. 9-18 Air Compressor Assembly: PN 45345..........................................................................9-36
Fig. 9-19 Hydraulic Compressor Valve Assembly: PN 45425......................................................9-38
Fig. 9-20 High Output Air Lance PN: 47483N (standard).............................................................9-40
Fig. 9-21 High Output Air Lance with Water Separator PN: 47491N (optional)............................9-41
Fig. 9-22 Wand Assembly PN 52200 ..........................................................................................9-42
Fig. 9-23 Super Shot Flex Boom.................................................................................................9-44
Fig. 9-24 Engine Cover Assembly PN: 48120N (optional)...........................................................9-46
Fig. 9-25 Hot Air Lance (optional) ...............................................................................................9-48

Super Shot 125 DC 70CFM EU Part Manual
List of Tables
Table 2-1 Safety Symbols and Notices......................................................................................... 2-3
Table 2-2 Safety Symbols and Notices (continued)....................................................................... 2-4
Table 4-1 Machine Specifications................................................................................................. 4-1
Table 5-1 Preparing the Machine for Start Up............................................................................... 5-1
Table 5-2 Starting the Burner........................................................................................................ 5-3
Table 5-3 Starting the Burner for Electric Hose (continued).......................................................... 5-4
Table 5-4 Operating the Electric Hose.......................................................................................... 5-7
Table 5-5 Dispensing the Material ................................................................................................ 5-8
Table 5-6 Loading Material into the Sealant Tank......................................................................... 5-9
Table 5-7 Material Tank Depth Chart.......................................................................................... 5-10
Table 5-8 Shutting Down and Cleaning Out the Machine............................................................ 5-11
Table 5-9 Hose for Transport Instructions................................................................................... 5-12
Table 5-10 Overnight Heater Use............................................................................................... 5-13
Table 5-11 Mounting a Skid Machine.......................................................................................... 5-14
Table 6-1 Air Compressor Maintenance Chart.............................................................................. 6-1
Table 6-2 Maintenance Chart........................................................................................................ 6-4
Table 6-3 Service Instructions....................................................................................................... 6-5
Table 6-4 General Maintenance Parts .......................................................................................... 6-5
Table 6-5 General Maintenance Parts (continued)........................................................................ 6-6
Table 6-6 Recommended Spare Parts.......................................................................................... 6-6
Table 6-7 Recommended Fluids and Lubricants........................................................................... 6-7
Table 6-8 Applicable Brand of Heat Transfer Oil........................................................................... 6-8
Table 6-9 Changing the Heat Transfer Oil..................................................................................... 6-9
Table 6-10 Material Pump Replacement..................................................................................... 6-10
Table 6-11 Material Pump Replacement (continued).................................................................. 6-11
Table 6-12 Material Pump Replacement (continued).................................................................. 6-12
Table 6-13 Material Pump Replacement (continued).................................................................. 6-13
Table 6-14 Material Pump Replacement (continued).................................................................. 6-14
Table 6-15 Material Pump Replacement (continued).................................................................. 6-15
Table 6-16 Material Pump Replacement (continued).................................................................. 6-16
Table 6-17 Material Pump Replacement (continued).................................................................. 6-17

Super Shot 125 DC 70CFM EU Part Manual
List of Tables
Table 6-18 Material Pump Replacement (continued) ..................................................................6-18
Table 6-19 Material Pump Replacement (continued) ..................................................................6-19
Table 6-20 Material Pump Replacement (continued) ..................................................................6-20
Table 6-21 Material Pump Replacement (continued) ..................................................................6-21
Table 6-22 Burner Fuel Filter Replacement.................................................................................6-28
Table 8-1 Basic Visual Troubleshooting........................................................................................8-1
Table 8-2 Basic Visual Troubleshooting (continued) .....................................................................8-2
Table 8-3 Burner Electrical Troubleshooting .................................................................................8-2
Table 8-4 Burner Electrical Troubleshooting (continued)...............................................................8-3
Table 8-5 Burner Electrical Troubleshooting (continued)...............................................................8-4
Table 8-6 Smoke Coming Out of Exhaust Stack ...........................................................................8-7
Table 8-7 Burner Lights but Shuts Down After 15 Seconds...........................................................8-7
Table 8-8 Testing the DC Controller..............................................................................................8-8
Table 8-9 Burner Fuel Solenoid Test.............................................................................................8-8
Table 8-10 Burner Ignition Coil Test..............................................................................................8-9
Table 8-11 Sealant is Heating Slowly..........................................................................................8-11
Table 8-12 Basic Visual Troubleshooting....................................................................................8-12
Table 8-13 Mixer Electrical Troubleshooting ...............................................................................8-13
Table 8-14 Mixer Electrical Troubleshooting (continued).............................................................8-14
Table 8-15 Mixer Hydraulic Troubleshooting...............................................................................8-17
Table 8-16 Basic Visual Hose Troubleshooting...........................................................................8-20
Table 8-17 Hose Electrical Troubleshooting................................................................................8-20
Table 8-18 Hose Electrical Troubleshooting (continued).............................................................8-21
Table 8-19 Trigger is Not Working...............................................................................................8-25
Table 8-20 RTD Sensor Ohms vs. Temperature.........................................................................8-26
Table 8-21 RTD Sensor Ohms vs. Temperature (continued).......................................................8-27
Table 8-22 Basic Visual Pump Troubleshooting..........................................................................8-28
Table 8-23 Pump Electrical Troubleshooting...............................................................................8-29
Table 8-24 Pump Electrical Troubleshooting (continued)............................................................8-30
Table 8-25 Pump Electrical Troubleshooting (continued)............................................................8-31
Table 8-26 Pump Electrical Troubleshooting (continued)............................................................8-32

Super Shot 125 DC 70CFM EU Part Manual
List of Tables
Table 8-27 Pump Electrical Troubleshooting (continued)............................................................ 8-33
Table 8-28 Pump Electrical Troubleshooting (continued)............................................................ 8-34
Table 8-29 Pump Hydraulic Troubleshooting.............................................................................. 8-35
Table 8-30 Engine DTC Table PN 48000N................................................................................. 8-38
Table 8-31 Engine DTC Table PN 48000N (continued)............................................................... 8-39
Table 8-32 Engine DTC Table PN 48000N (continued)............................................................... 8-40
Table 8-33 Engine DTC Table PN 48000N (continued)............................................................... 8-41
Table 8-34 Engine DTC Table PN 48000N (continued)............................................................... 8-42
Table 8-35 Engine DTC Table PN 48000N (continued)............................................................... 8-42
Table 8-36 Engine DTC Table PN 48000N (continued)............................................................... 8-43
Table 9-1 Super Shot 125 Diesel (70 CFM) Compressor Melter Skid............................................ 9-3
Table 9-2 Super Shot 125 Diesel (70 CFM) Compressor Melter Skid (continued).......................... 9-5
Table 9-3 Super Shot 125 Diesel (70 CFM) Compressor Melter Skid (continued).......................... 9-7
Table 9-4 Tank Assembly: All Models........................................................................................... 9-9
Table 9-5 Control Box Assembly, PN 47252N ............................................................................ 9-11
Table 9-6 Engine Assembly: PN 48000N.................................................................................... 9-13
Table 9-7 Engine Assembly: PN 48000N (continued)................................................................. 9-15
Table 9-8 Hydraulic Control Valve Assembly: PN 45420............................................................. 9-17
Table 9-9 Material Flow Control Assembly: PN 46060................................................................ 9-19
Table 9-10 Pump/Mixer Motor Assembly: PN 44832................................................................... 9-21
Table 9-11 Diesel Burner Assembly: PN 46380.......................................................................... 9-23
Table 9-12 Hydraulic Diagram: PN 26663................................................................................... 9-25
Table 9-13 Hydraulic Diagram: PN 26663 (continued)................................................................ 9-27
Table 9-14 Hydraulic Diagram: PN 26663 (continued)................................................................ 9-29
Table 9-15 Diesel Fuel Line Schematic....................................................................................... 9-31
Table 9-16 Diesel Fuel Line Schematic (continued).................................................................... 9-33
Table 9-17 Electrical Schematic.................................................................................................. 9-35
Table 9-18 Air Compressor Assembly: PN 45345....................................................................... 9-37
Table 9-19 Hydraulic Compressor Valve Assembly: PN 45425................................................... 9-39
Table 9-20 High Output Air Lance PN: 47483N (standard) ......................................................... 9-40
Table 9-21 High Output Air Lance with Water Separator PN: 47491N (optional)......................... 9-41

Super Shot 125 DC 70CFM EU Part Manual
List of Tables
Table 9-22 Wand Assembly PN 52200 .......................................................................................9-43
Table 9-23 Super Shot Flex Boom..............................................................................................9-45
Table 9-24 Engine Cover Assembly PN: 48120N (optional)........................................................9-47
Table 9-25 Hot Air Lance (optional).............................................................................................9-49

Super Shot 125 DC 70CFM EU Part Manual
Chapter 1 Introduction
©2022 by Crafco, Inc. All Rights Reserved Introduction 1-1
1.0 About This Manual
This manual is supplied with each new Crafco Super Shot 125 Diesel Melter. The manual assists
your machine operators in the proper use of the melter applicator and provides information about
the machine’s mechanical functions.
Your Crafco Super Shot 125 Diesel Melter is specially made to give excellent service and save
maintenance expense. However, as with all specially engineered equipment, you get best results at
minimum cost if you:
Operate your machine as instructed in this manual.
Maintain your machine regularly as stated in this manual.
1.1 How to use this manual
This manual is formatted to start each new chapter on the right page. There may be a blank page
on the left page if the previous chapter ends on the right page.
If you are viewing this in a digital format (PDF) the following features are available:
1. The Table of Contents, List of Tables, and List of Figures are all hyperlinks; when mouse is left-
clicked on section, table, or figure you will be sent to that page.
2. The blue highlighted text throughout the manual is a hyperlink; when mouse is left clicked you
will be sent to that page, table, or figure.
3. The panel to the left in the PDF is a bookmarks panel, if you left click on any section/heading in
the bookmarks panel you will be sent to that page.

Super Shot 125 DC 70CFM EU Part Manual
Chapter 1 Introduction
©2022 by Crafco, Inc. All Rights Reserved Introduction 1-2

Super Shot 125 DC 70CFM EU Part Manual
Chapter 2 Safety
©2022 by Crafco, Inc. All Rights Reserved………………………………………..…………………………………Safety 2-1
2.0 Safety Precautions
For more in-depth safety information, please see Safety Manual (PN 26221), which comes with the
machine. Or contact your nearest authorized Crafco Distributor at crafco.com/Distributors.
2.1 General Safety
•Crafco, Inc. assumes no liability for an accident or injury incurred through improper use of
the machine.
•Read this manual thoroughly before operating the machine.
•Obey all CAUTION and WARNING signs posted on the machine.
•Make sure an operator fully knows how to operate the machine before using the machine.
2.2 Personal Safety
•The high operating temperatures of this machine and the sealant it contains requires that
protective clothing, gloves, hard-soled shoes, and safety glasses or a face shield be worn at
all times by operators of the machine.
•Prevent water from going into any part of the machine. If there is indication of water in the
heat transfer oil system, warm heating oil to 250-300°F for 2 to 3 hours.
•Bodily contact with hot sealant or heat transfer oil can cause severe burns.
•If the mixer is not stopped before adding solid material, hot material can get on an operator’s
body and cause severe burns.
•Keep hands, feet, and clothing away from all moving parts.
2.3 Equipment or Operational Safety
•Do not operate the machine in buildings or work areas that do not have sufficient airflow.
•Shut-down the burner and the engine before refilling the fuel tank.
•Make sure the mixer stops before adding solid material to the sealant tank. Lift the lid, place
the material on the lid, and close the lid. The mixer should restart automatically.
•Always keep a correctly maintained fire extinguisher near the machine and know how to use
it.
•DO NOT heat transfer oil to a temperature of more than 525°F.
•DO NOT put too much heat transfer oil in the reservoir. The expansion of oil while it heats
up can cause overflow. Check the oil each day before starting the burner. With the machine
on a level surface, check the heat transfer oil level using the mark on the dipstick closest to
the current oil temperature (0°F, 70°F, or 150°F) See Fig. 5-2 Heat Transfer Oil Dip Stick.
Add oil if required. Use only recommended heat transfer oil. Change the oil after 500 hours
of machine operation, or one year, whichever comes first.
•Follow the operating instructions for starting and shutting down the burner. Instructions are
mounted on the control box on the machine.
•Calibrate the temperature control operation after each 50 hours of machine operation. Refer
to section 6.7 Temperature Control Calibration.
•Replace any hoses that show signs of wear, fraying, or splitting.
•Make sure all fittings and joints are tight and do not leak each time the machine is used.
•Do not leave the machine unattended while the burner is lit.
•Tighten all bolts and screws every 100 hours of machine operation.

Super Shot 125 DC 70CFM EU Part Manual
Chapter 2 Safety
©2022 by Crafco, Inc. All Rights Reserved………………………………………..…………………………………Safety 2-2
2.4 California Proposition 65
The state of California currently maintains a list of chemicals that can cause cancer, birth defects, or
other reproductive harm. your Crafco, Inc. equipment comes with the following warnings:
All Crafco, Inc. Equipment
All Crafco, Inc. Equipment using a diesel engine
2.5 Towing or Driving for Transporting with Burner On
The burner in your Crafco machine is designed for operation only while the unit is parked or towed
at slow speeds while applying sealant at a jobsite. When driving or towing this machine for
transport, the burner shall be turned off. Operating the burner when transporting the machine is a
violation of The Code of Federal Regulations, CFR Title 49, Part 392, Subpart G, 392.67 and may
cause damage to the burner and/or machine.
CAUTION
The burner in your Crafco machine is designed for operation only while the unit is parked or
towed at slow speeds while applying sealant at a jobsite. When driving or towing this
machine for transport, the burner shall be turned off.
! WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
26471N
! WARNING: Breathing diesel engine exhaust exposes you to chemicals
known to the State of California to cause cancer and birth defects or other
reproductive harm.
• Always start and operate the engine in a well-ventilated area.
• If in an enclosed area, vent the exhaust to the outside.
• Do not modify or tamper with the exhaust system.
• Do not idle the engine except as necessary.
For more information go to www.P65warnings.ca.gov/diesel. 26307