Ergotron 45-304-026 User manual

1 of 18
888-45-255-W-01 rev. J • 09/19
CAUTION!
MAXIMUM SCREEN SIZE
CAUTION!
MAXIMUM WEIGHT CAPACITY
70 LBS
31.8 KG
60+"
Interactive TV ArmVHD
www.ergotron.com | USA: 1-800-888-8458 | Europe: [phone] | China: 400-120-3051 | Japan: [email protected]
User Guide

2 of 18
888-45-255-W-01 rev. J • 09/19
CONTENTS
Part Quantity Description
11 Wall Plate
21 Arm/Wall Plate Hardware
32 Wall Plate Covers
41 Rear Arm Cover
51 CFT Arm
61 200x200VESA Monitor Plate
74 Spider Adapters
1
3
4
56
7
P-F
P-J
P-K
Wall Kit 697-688-00
Part Quantity Description
W-A 3 Lag Bolts M8x80mm
W-B 3 RoundWashers M8
W-C 3 Wall Anchor M8
Specialty Hardware Kit 697-640-00
Part Quantity Description
P-A 1 Philips Screw M6 x8mm
P-B 4 Round Head Screws M6x13mm
P-C 8 Hex Nuts M6
Screws/Hardware For Flat Panel 697-613-00
Part Quantity Description
M-A 4 Philips screws M4 x 15mm
M-B 4 Philips screws M4 x 30mm
M-C 4 Philips screws M5 x 15mm
M-D 4 Philips screws M5 x 30mm
M-E 4 Philips screws M6 x 15mm
M-F 4 Philips screws M6 x 30mm
M-G 4 Philips screws M8 x 15mm
M-H 4 Philips screws M8 x 30mm
M-I 4 Round spacers M6-M8 x 5mm
M-J 4 Round spacers M6-M8 x 10mm
M-K 4 Round washers M4-M5
M-L 4 Round washers M6-M8
P-I
P-H
P-G
P-M
Cable Wrap Kit 697-701
Part Quantity Description
P-D 1 CableWrap
BOP 699-633
Part Quantity Description
P-L 2 CableTies
10mm
8mm Socket Kit 697-743
Part Quantity Description
P-Q 1 8mm Socket (1/4" Drive)
8mm
2

3 of 18
888-45-255-W-01 rev. J • 09/19
CAUTION!
MAXIMUM SCREEN SIZE
CAUTION!
MAXIMUM WEIGHT CAPACITY
70 LBS
31.8 KG
60+”
Tools Needed
Herramientas necesarias
Outils requis
Benötigte Werkzeuge
Benodigde gereedschappen
Strumenti necessari
Potrzebne narzędzia
Potřebné nástroje
Szükséges eszközök
Απαιτούμενα εργαλεία
Ferramentas necessárias
Nødvendigt værktøj
Tarvittavat työkalut
Verktyg som krävs
Instrumente necesare
Необходими уреди
Vajalikud tööriistad
Nepieciešamie rīki
Reikalingi įrankiai
Potrebno orodje
Potrebné náradie
Необходимые инструменты
Gerekli Aletler
Nødvendige verktøy
الأدوات اللازمة
需要的工具
必要なツール
TOOLS NEEDED
13mm
Deepsocket

4 of 18
888-45-255-W-01 rev. J • 09/19
Placement of Arm on theWall
RANGE OF MOTION
19.16”
(487mm)
20.4”
(518mm)
16.83”
(428mm)
20.13”
(511mm)
.98”
(25mm)
1.38”
(35mm)
10.63”
(270mm)
Front view with arm pushed back against thewall.
Top view showing rangeof motion when pulled out from
thewall.
SPACE REQUIREMENTS
front
front
front
side
top
top
Horizontal Studs
DistancefromtheWall
If there is no availablestud for
desired TV location, you may
want to insert horizontal studs
into yourwall at thedesired
mounting location.
28.8”(640 mm) +
Thickness of TV
25.2”(640 mm) + Thickness
of TV
Horizontal SpaceRequirements
40.49”(1028mm) + Width of TV*
Vertical Space
Requirements
20.49”(520mm) + Height
of TV*
*Spacerequirement dimensions assume mounting holes are centered on theTV.
1. MOUNTING CONSIDERATIONS:
• Wall Mount Bracket MUST beattached to a stud orsolid concrete. DO NOT attach this product to hollow wall orany other conguration.
• Makesure Arm will have desired unobstructed rangeof motion: up-down, side-to-side, in-out (see section RANGE OF MOTION).
• Makesure cables will reach their destinations with enough remaining slack to allow Arm full rangeof motion.
• UsetheRANGE OF MOTION section to familiarizeyourself with themovements of this product. Takeinto account that theTV will change
location fromSide-to-Sidewhen pulled out fromthewall.
• UsetheSPACE REQUIREMENTS section formaximummeasurements of this products full rangeof motion.
• If there is no availablestud fordesired TV location, you may want to insert horizontal studs into yourwall at thedesired mounting
location (see“Horizontal Studs”imagebelow).
2. CHOOSE YOUR DESIRED TV LOCATIONS:
Chooseyourdesired TV locations when stowed and extended. NotetheTV will move side-to-sidewhen pushing it into and pulling it
out fromthewall as well as lifting it up and lowering it down. This step requires an understanding of this products Rangeof Motion (see
section RANGE OF MOTION).

5 of 18
888-45-255-W-01 rev. J • 09/19
1
2
a
a
bc
Wood Stud Mount
cd
W-A
W-B
1
b
7/32 x2.75"
5.5mm x70mm
13mm
Deepsocket

6 of 18
888-45-255-W-01 rev. J • 09/19
Solid Wall Mount
1abc
2a
c
b
d
W-A
W-B
W-C
3/8 x2.75"
9.5 - 10mm x70mm
13mm
Deepsocket

7 of 18
888-45-255-W-01 rev. J • 09/19
3ab
Cd
1
2
5
P-F
P-J
P-K
P-I
16mm Bearing
P-G
25mm Washer
P-L
P-F
65mm Washer
P-M
P-H
Spring Disc
NOTE: Part# P-H must
be concave face down for
proper assembly.
13mm
Deepsocket

8 of 18
888-45-255-W-01 rev. J • 09/19
4
100 x 200
200 x 200
200 x 300
200 x 400
300 x 300
300 x 400
400 x 400
600 x 400
300 x 200
400 x 200
200mm (7-7/8”)
400mm (15-3/4”)
300mm (11-13/16”)
600mm (23-5/8”)
100mm (3-15/16”)
200mm (7-7/8”)
200mm (7-7/8”)
400mm (15-3/4”)
300mm (11-13/16”)
400mm (15-3/4”)
300mm (11-13/16”)
400mm (15-3/4”)
400mm (15-3/4”)
300mm (11-13/16”)
200mm (7-7/8”)
A
B
C
D

9 of 18
888-45-255-W-01 rev. J • 09/19
OR
OR
OR
OR
OR
OR
OR
100 x 200
200 x 200
200mm (7-7/8”)
100mm (3-15/16”)
200mm (7-7/8”)
200mm (7-7/8”)
A
M-A M-B M-C M-D M-E M-F
M-G M-H
M-K
M-L
M-I
M-J
6
WARNING! PLEASE SELECT THE PROPER SCREW LENGTH FOR YOUR FLAT PANEL
BY HAND TIGHTENING TO CHECK YOUR FLAT PANELS THREAD DEPTH.

10 of 18
888-45-255-W-01 rev. J • 09/19
BCD
400mm
300mm
200mm
600mm
400mm
300mm
400mm
300mm 400mm
400mm
300mm
200mm
200 x 300
200 x 400
300 x 300
300 x 400
400 x 400
600 x 400
300 x 200
400 x 200
X8
P-B
P-C
6
7
FRONT of
Monitor Plate
10mm
8mm