Erica Synths HI-HATS A User manual

TONE TONE CV
CH DECAY CV OH DECAY CV
CHTRIG TONECV CHDECCV CH OUT
OH TRIG ACC OH DEC CV OH OUT
CH DECAY OH DECAY
INDEXCL
HI-HATS A
HI-HATS A
Set the master Tone of Hi-Hats. This affects both
Hi-Hats simultaneously, and essentially is the cutoff
control for the VCF after metallic noise generator
This is Tone CV level attenuator
Adjust Closed hat decay time manually
Adjust Open hat decay time manually
This is Closed hat Decay CV level attenuator
This is Open hat Decay CV level attenuator
Use the manual trigger button to check the Hi-Hats
settings and add some beats during live performance
These are Trigger inputs. The LEDs indicate
incoming triggers
This is Tone CV input
This is the Accent input. +10V CV will set the Hi-Hats
to the maximum volume, and it affects both Hi-Hats
simultaneously
These are Decay CV inputs
This is the output of the Closed hat
This is the output of the Open hat. If nothing is patched
in Closed hat output, it is automatically mixed with Open
hat, and you can use one output for both Hi-Hats
TONE
TONE CV
CH DECAY
OH DECAY
CH DECAY CV
OH DECAY CV
TONE CV
CH DEC CV,OH DEC CV
CH TRIG,OH TRIG
CH OUT
ACC
OH OUT

THANK YOU FOR PURCHASING
ERICA SYNTHS DRU ODULE!
Erica Drum Series modules include high-end,
unique functionality and superior quality modules,
which allow you to design extensive, feature rich
modular system for sound design and live
performances. Enjoy!
SAFETY INSTRUCTIONS
Please follow the instructions for use of the Erica Synths module
below, ‘cause only this willguarantee proper operation of the module
and ensure warranty from Erica Synths.
Water is lethal for most of the electric devices, unless they are madewaterproof.
This Erica Synths module is NOT intended for use in a humid or wet environment.
No liquids or other conducting substances must get into the module. Should this
happen, the module should be disconnected from mains power immediately,
dried, examinedand cleaned by a qualified technician.
Transport the instrument carefully, never let it drop or fall over.
Warranty does not apply to modules with visual damages.
Do not expose the module to temperatures above +50° C or below -20° C.
If you have transported module in extreme low temperatures, leave it
in room temperature for an hour before plugging it in.
The module has to be shipped in the original packaging only. Any module
shipped to us for return, exchange and/or warranty repair has to be in its
original packaging. All otherdeliveries will be rejected and returned to you.
Make sure you keep the original packaging and technical documentation.
This device complies to the EU guidelines and is manufactured RoHS conforming
without use of lead, mercury, cadmium and chrome. Nevertheless, this device is
special waste and disposal in household waste is not recommended.
You willfind Erica Synths terms of warranty at www.ericasynths.lv
Items for return, exchange and/or warranty repair have to besent to:
Erica Synths
Andrejostas Str. 43
Riga
Latvia
LV-1045
User manual by Girts Ozolins@Erica Synths.
Design by Ineta Briede@Carre Branding.
Copying, distribution or any commercial use in any way
is prohibited and needs the written permission by Erica Synths.
Specifications are subject to change without notice.
In case of any questions, feel free to contact us through
www.ericasynths.lv or via e-mail [e-mail]
Erica Synths full analogue Hi-Hats A module with accent
and manual and CV control over Tone and Decay (individual
for each hi-hat) allows you to create lot of variations in hi-hats
track. Closed hat and Open hat can be played independently or
exclusively (Open hat will not trigger, if Closed hat is triggered).
The module is developed in collaboration with French company
e-licktronic, developers of NAVA and YOCTO DIY drum machines.
FEATURES
Tone and Decay controls
CV control with an attenuator over Tone and Decay
Independent/Exclusive switch
Manual trigger
Accent for better expression
SPECS
Decay range Closed hat 10ms - 200ms
Decay range Open hat 110ms - 800ms
Audio output level -5…+5V
CV level (full span) -5V - +5V
Accent CV level 10V
Tigger level 5V
Trigger time 1ms
Power consumption 33mA @ +12V, 26mA @ -12V
Module width 10HP
Module depth 50mm