Worx WA0863 User manual

get started
WA0863
(compatible with Landroid models WR130E/WR141E/WR142E/WR143E/WR153E/WR)
WA0892
(compatible only with Landroid L1000 model WR147E)

Table of contents EN
2
Welcome
Contact information
Safety first
Important safety instructions
Get familiar with
What’s in the box
How it works
Getting started
Installation
Quick reference
Trouble shooting
Technical data
Declaration of Conformity
p. 03
p. 04
p. 05
p. 06
p. 07
p. 15
p. 15
p. 16
TABLE OF CONTENTS

Welcome EN
3
Thank you for purchasing a Worx Off Limits.
Support
www.worx-europe.com/support
Landroid Owner’s Site
https://account.worxlandroid.com/login
We’re here to help:

Safety first EN
4
WARNING:
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Carefully read the instructions for the safe operation of the machine.
Save all warnings and instructions for future reference.
Symbols
Warning
Read the operator’s manual.
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authorities or retailer for recycling advice.

Get familiar with EN
WHAT’S IN THE BOX
5
8 connectors
24 pegs
A
B
4 magnetic strip coils
Off Limits module
C
D
B
A C
D

Get familiar with EN
HOW IT WORKS
6
The Off Limits option allows you to define a no-mow zone in your lawn without using the boundary wire.
Laying out an island in the middle of the garden, far away from the borders, can often be complicated, and it usually requires a
great length of wire. With the Off Limits option you just have to install the magnetic strip around the object you want to exclude
from mowing, and you’re good to go.
It’s particularly useful if you have seasonal equipment like paddling pools or trampolines, or if you’ve just finished sowing a part of
the lawn and you want it to settle before allowing Landroid to mow it. Off Limits is also useful if you decide to change the layout
of your garden sometimes after deploying the boundary wire - for example, if you decide to add a flowerbed - so you don’t need
to redo the whole perimeter.
Off Limits comes in two pieces: a box with a sensor to install on your Landroid and a magnetic strip to surround forbidden areas.
The strip does not need to be connected to the perimeter wire, nor to be powered. The sensor detects the magnetic field emitted
by the band and bounces away.
Please be advised that the Cut To Edge function won’t work around the Off Limits strip.
Landroid L 1000 (WR147E and WR147E.1 models) is only compatible with a specific Off Limits module - the WA0892
model. This model is only compatible with Landroid L 1000 (WR147E and WR147E.1 models).

7
Getting started EN
INSTALLATION
Before proceeding with the installation please make sure your Landroid’s firmware is updated to the last version. For more information on
firmware upgrade please refer to the “Maintenance” section of the Landroid-o-pedia (https://support.worx-europe.com).
Follow the steps below according to the Landroid model you own
1. Turn off Landroid
OK
START
SET
1
2. Remove Landroid blades using a screwdriver – wear gloves to
avoid injury
3
3. Take out the slot cover using a screwdriver 4. Plug the cables of the Off Limits until you hear a “click” and
insert the module in its slot
CLICK!
4
5
5. Put the cover back and secure it with
the included screws.
6
6. Screw Landroid blades back in and
turn Landroid on.
Landroid S 300 (WR130E)
Landroid M 500 (WR141E)

EN
8
7. Deploy the magnetic strip around the area.
Lay it out at least 32cm away from the area, on its at side and in
a circular or elliptic shape (avoid straight lines and corners).
32cm
7
8. Secure it with the provided pegs. The distance between the
pegs should be around 80cm.
9
9. Use the connector to close the circuit. The ends of the strip inside
the connector need to be at least 2cm long. You can join as many
magnetic strips as you want by using the connectors.
There is no size limit.
32cm 32cm
10
> 2 m > 2 m > 2 m
10. The magnetic strip needs to be laid down at least 2 meters
away from the boundary wire or another Off Limits area.
8
80 cm
Getting started
Remember that you can’t cross the boundary wire with the
magnetic strips!
Avoid lying the magnetic strip in areas where Landroid
can slip (eg. areas with slopes).
11.The Off Limits icon is now active. Touch it to see the status
and to activate/disactivate the option. If the Status shows
“error” contact our support team at https://support.worx-eu-
rope.com
11

EN
9
Landroid M 700 (WR142E)
Landroid M 1000 (WR143E)
1. Turn off Landroid 2. Remove Landroid blades using a screwdriver – wear gloves to
avoid injury
3. Take out the slot cover using a screwdriver 4. Plug the cables of the Off Limits until you hear a “click” and insert
the module in its slot
5
5. Put the cover back and secure it with
the included screws.
6. Screw Landroid blades back in and
turn Landroid on.
6
Getting started

EN
10
Getting started
7. Deploy the magnetic strip around the area.
Lay it out at least 32cm away from the area, on its at side and in
a circular or elliptic shape (avoid straight lines and corners).
32cm
7
8. Secure it with the provided pegs. The distance between the
pegs should be around 80cm.
9
9. Use the connector to close the circuit. The ends of the strip inside
the connector need to be at least 2cm long. You can join as many
magnetic strips as you want by using the connectors.
There is no size limit.
32cm 32cm
10
> 2 m > 2 m > 2 m
10. The magnetic strip needs to be laid down at least 2 meters
away from the boundary wire or another Off Limits area.
8
80 cm
Remember that you can’t cross the boundary wire with the
magnetic strips!
Avoid lying the magnetic strip in areas where Landroid can
slip (eg. areas with slopes).
11.The Off Limits icon is now active. Touch it to see the status
and to activate/disactivate the option. If the Status shows
“error” contact our support team at https://support.worx-eu-
rope.com
11

EN
11
Landroid L1000 (WR147E)
1
2
2. Remove Landroid blades using a screwdriver –
wear gloves to avoid injury
3. Take out the slot cover using a screwdriver 4. Plug the cables of the Off Limits until you hear a “click” and insert
the module in its slot
5. Put the cover back and secure it with
the included screws.
6. Screw Landroid blades back in and
turn Landroid on.
Getting started
3
CLICK!
4
5
1. Turn off Landroid

EN
12
Getting started
7. Deploy the magnetic strip around the area.
Lay it out at least 32cm away from the area, on its at side and in
a circular or elliptic shape (avoid straight lines and corners).
32cm
7
8. Secure it with the provided pegs. The distance between the
pegs should be around 80cm.
9
9. Use the connector to close the circuit. The ends of the strip inside
the connector need to be at least 2cm long. You can join as many
magnetic strips as you want by using the connectors.
There is no size limit.
32cm 32cm
10
> 2 m > 2 m > 2 m
10. The magnetic strip needs to be laid down at least 2 meters
away from the boundary wire or another Off Limits area.
8
80 cm
Remember that you can’t cross the boundary wire with the
magnetic strips!
Avoid lying the magnetic strip in areas where Landroid can
slip (eg. areas with slopes).
11. The Off Limits icon is now active. Touch it to see the sta-
tus and to activate/disactivate the option. If the Status shows
“error” contact our support team at https://support.worx-eu-
rope.com
11

EN
13
5
Landroid L 1500 (WR153E)
Landroid L 2000 (WR155E)
1. Turn off Landroid 2. Remove Landroid blades using a
screwdriver – wear gloves to avoid injury
3. Take out the slot cover using a screwdriver 4. Plug the cables of the Off Limits until you hear a “click” and insert
the module in its slot
5. Put the cover back and secure it with
the included screws.
6. Screw Landroid blades back in and
turn Landroid on.
Getting started

14
EN
Getting started
7. Deploy the magnetic strip around the area.
Lay it out at least 32cm away from the area, on its at side and in
a circular or elliptic shape (avoid straight lines and corners).
32cm
7
8. Secure it with the provided pegs. The distance between the
pegs should be around 80cm.
9
9. Use the connector to close the circuit. The ends of the strip inside
the connector need to be at least 2cm long. You can join as many
magnetic strips as you want by using the connectors.
There is no size limit.
32cm 32cm
10
> 2 m > 2 m > 2 m
10. The magnetic strip needs to be laid down at least 2 meters
away from the boundary wire or another Off Limits area.
8
80 cm
Remember that you can’t cross the boundary wire with the
magnetic strips!
Avoid lying the magnetic strip in areas where Landroid can
slip (eg. areas with slopes).
11. The Off Limits icon is now active. Touch it to see the sta-
tus and to activate/disactivate the option. If the Status shows
“error” contact our support team at https://support.worx-eu-
rope.com
11

EN
15
Troubleshooting
Make sure your Off limits module is securely installed and follow the actions below if your Landroid®does not operate correctly.
If these do not identify and correct the problem, please go to https://account.worxlandroid.com/, access your profile and open a
ticket using the form.
Symptom Cause Action
Landroid®fails to recognize the
magnetic strip and goes across it.
The magnetic strip loop is not closed.Every piece of magnetic strip inside the
connector should be no shorter than 20mm.
The connector is not well joined. Check and make sure the connector is well
joined.
The magnetic strip is buried too deep
under ground, in a hole or under the
concrete.
Reposition the magnetic strip to lie flat on the
ground.
The magnetic strip is not working as
temperature is too high (more than 65°C) Wait until the temperature cools down.
Landroid®stops near the magnetic
strip
Landroid®is trapped after bumping into
the magnetic strip several times.
1. Turn Landroid off and take it to an area free
of obstacles.
2. Check strip layout.
3. Turn Landroid®on. Press START and OK.
Landroid®runs round near the
ring-fence area.
The magnetic strip is too close to the
boundary wire.
Two ring-fence areas are too close to
each other.
Keep a space of at least 2m between the
boundary wire and the magnetic strip or
between two ring-fence areas.
The magnetic strip is overlapping the
boundary wire.
The magnetic strip should be kept 2m away
from the boundary wire.
Some interference may exist in the
working area, due to electric cables or
iron pieces underground.
Check and remove interference.
Landroid®enters into the ring-
fence area.
Landroid®slips when it draws back
and makes a turn after recognizing the
magnetic strip.
Avoid lying the magnetic strip in areas where
Landroid®can slip (eg. areas with slopes).
Technical data
Rated Voltage 5V
Quick reference

EN
16
Quick reference
Declaration of Conformity
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description Fence module
Type WA0863
Function Area isolation
Complies with the following Directives:
2014/30/EU, 2011/65/EU & (EU)2015/863
Standards conform to
EN 55014-1, EN 55014-2
2020/04/08
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd.
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China