Ericsson T68 Specification sheet

SMS Command List
A command line consists of the application name smc; the desired function; your phone
number and your PIN. All separated with *insertions. The command line ends with the #
symbol. An example of a halt command will look as follows;
smc*225*4477660000000*1111#
All commands are to be sent to the application gateway number [phone]
Commands currently available.
222 Registration and subsequent topping up
223 retrieve all contacts
224 Confirm continue restore (also *yes can be used)
225 Halt restore in progress
226 Status enquiry for credit units, number of contacts saved etc
227 Change of phone number notification
228 Retrieve specific contact i.e smc*228*234803000000*1111#jo
will return john, Joan etc.
Setting up Ericsson T68 to synchronise with SaveMyContacts
Please ensure your WAP provider has configured your phone for WAP/GPRS access.
Ericsson T68
SyncML
vCard
quick setup / user guide
SaveMyContacts

SyncML set up (Step by step guide)
Go to Menu and Select connect -
then go to Synchronization - Click sy nchronisation . You should now see ( synchronise, server settings and sound.
Click server settings. You should see six fields. Scroll down to server user id and then click
Type in your mobile number in international format i.e. 447766xxxxxxxx
Go back to server settings, scroll down to server pwd and then click
Type in your 4 digit pin
Go back to server settings and scroll down to server URL
Type in www.
savemycontacts.com/sync.jsp
Go back to server settings and scroll down to phonebook path, then click. You will see three fields under phonebook
path i.e path, server user ID and server pwd. Only the first one needs filling in. Click on path and type in
contacts i.e
Path: contacts
(Please note this is case sensitive)

Sending contacts to application
Go to phonebook then click on business cards
Then click on send contact; you will see find
Find contact you want to back up and press Send as SMS
send to application number + 44 7781 489444
( we recommend you save this number as a contact . Call it SMC ).
Retrieving contacts from application
Compose SMS as in the following example. smc is the application name ; 223 is the
retrieve command, the third field is your phone number starting with country code.
The fourth field is your PIN, the *symbols separate the fields so the application
can understand your request, and the # symbol signals the end of the command
.i.e.
smc*223*447766570001*1111#
We advise that you save command as a text template which you can edit to suit!!!!
The application pauses after sending 10 contacts. To continue, send
smc*224 to
application number. every contact retrieved will deduct a unit from your credit.
For other commands you can send to the application please see next page.

Command List
222 Registration and subsequent topping up
223 retrieve all contacts
224 Confirm continue restore (also *yes can be used)
225 Halt restore
226 Status enquiry credit units contacts etc
227 Change of phone number notification
228 Retrieve specific contact i.e smc*228*447766570001*1111#john