Esatto EVD700W User manual

Version
V1.4 0223
Everything you need for
your 7kg Vented Dryer
is in this User Mnul
Model/s
EVD700W

User Manual
2
e
everything
you need

esatto.house
3
Pge 4
Welcome
Pge 5
Sfety Instructions
Pge 8
Your Vented Dryer
Pge 9
Accessories
Pge 10
Instlltion
Pge 13
Operting
Instructions
Pge 16
Clening 
Mintennce
Pge 18
Troubleshooting
Pge 19
Technicl
Specictions
Pge 20
Wrrnty
Informtion
Contents
Pge 22
Purchse Detils

User Manual
4
Congratulations on purchasing your new Esatto appliance. The Esatto brand is proudly
distributed within Australia by Residentia Group Pty Ltd.
Please refer to the warranty card at the rear of this manual for information regarding
your product’s parts and labour warranty, or visit us online at: www.residentia.group
At Residentia Group, we are customer obsessed and our Support Team are there to
ensure you get the most out of your appliance. Should you want to learn more about
your vented dryer such as the various drying modes or importantly taking care
of the appliance, our Support Team are here to help.
You can use our online Support Centre at anytime by visiting:
http://support.residentiagroup.com.au
Or you can contact us via phone by dialing: 1300 11 HELP (4357).
It is important that you read through the following use and care manual thoroughly to
familiarise yourself with the installation and operation requirements of your appliance
to ensure optimum performance.
Again, thank you for choosing an Esatto appliance and we look forward to being
of service to you.
Kind Regards,
The Residentia Team
Residentia Group
—
Head Office
165 Barkly Avenue
Burnley, Victoria
Australia 3121
—
ACN
600 546 656
—
Online
residentia.group
www.Esatto.house
@Esatto.house
—
Postage
PO Box 5177
Burnley, Victoria
Australia 3121
—
Telephone
1300 11 4357
Welcome

esatto.house
5
DRYER CARE SYMBOLS
Plese py ttention to use the drying mchine if the
mterils of your clothes cn not be dried by it or contin
the symbols s follows:
IMPORTANT!
CAUTION: RISK OF FIRE!
To prevent ny dmges to your nd others’ life or property,
you hve to follow the sfety notes.
• This product belongs to the ctegory of electricl
pplinces, nd only for drying textiles which hve been
wshed with wter in the household.
Plese py ttention to the sfety of power use during
the opertion!
• The power source with relible erthing must be
used. Its erth wire must be buried under the ground
nd shll not be connected with the public utilities
such s city wter pipe or gs pipe etc. The erth wire
nd null wire shll be distinguished nd shll not be
connected together.
• The mximum mss of dry textile mteril is 7 kilogrms
to be used in the pplince.
• Tht the tumble dryer is not to be used if industril
chemicls hve been used for clening.
• Do not dry unwshed items in the tumble dryer.
• The exhust ir must not be dischrged into  ue
which is used for exhusting fumes from pplince
burning gs or other fuels.
• Adequte ventiltion hs to be provided to void the
bck ow of gses into the room from pplinces
burning other fuels, including open res.
• The pplince must not be instll behind  lockble
door,  sliding door or  door with  hinge on the
opposite side to tht of the tumble dryer. In such  wy
tht  full opening of the tumble dryer door is restricted.
• Keep pets wy from this pplince.
• Oil-ected items cn ignite spontneously, especilly
when exposed to het sources such s in  tumble dryer.
The items become wrm, cusing n oxidtion rection
in the oil. Oxidtion cretes het. If the het cnnot
escpe, the items cn become hot enough to ctch re.
Piling, stcking or storing oil-ected items cn prevent
het from escping nd so crete  re hzrd.
• If it is unvoidble tht fbrics tht contin vegetble
or cooking oil or hve been contminted by hir cre
products be plced in  tumble dryer they should rst
be wshed in hot wter with extr detergent-this will
reduce, but not eliminte, the hzrd.
• The pplince should not be overturned during norml
use or mintennce.
• If the power cble is dmged, it must be replced by
the mnufcturer, its service gent or similrly qulied
persons in order to void  hzrd.
• This pplince is for indoor use only.
• The openings must not be obstructed by  crpet
• Children of less thn 3 yers should be kept wy
unless continuously supervised. If the pplince pper
high temperture bnormlly, plese unplug the
pplince immeditely.
• The pplince is not intended for use by persons
(including children) with reduced physicl, sensory
or mentl cpbilities, or lck of experience nd
knowledge, unless they hve been given supervision
or instruction concerning use of the pplince by 
person responsible for their sfety. Children should be
supervised to ensure tht they do not ply with
the pplince.
To ensure your nd your fmily’s sfety, plese mke
improvement immeditely if ny power use t your
home does not meet the bove-mentioned requirement.
WARNING: ELECTRIC SHOCK HAZARD!
• Do not drw the power cord forcefully to pull out
the mins plug.
• Plese do not plug/drw the mins plug with wet hnds.
• Do not dmge the power cord nd the power plug.
• Plug must be ccessible fter instlltion.
• WARNING: The pplince must not be supplied
through n externl switching device, such s  timer, or
connected to  circuit tht is regulrly switched on nd
o by  utility.
CAUTION: DAMAGE DANGER
1. Do not dry over the rted cpcity.
2. Do not operte the dryer without the door lter.
3. Do not dry the clothes before being spun.
4. Do not expose the dryer directly under the sun, nd
indoor use only.
5. Do not instll the dryer in humid nd wet environments.
6. At clening nd mintennce, plese remember to pull
out the power plug nd do not directly wsh the dryer
with wter.
Sfety Instructions

User Manual
6
Power supply nd grounding
• The dryer employs lternting current with the rted
voltge nd frequency.
• When the voltge uctutes between 6% of rted
voltge, the dryer cn work normlly.
• A specil power socket with  cpcity 10A for the
dryer hd better be set beside the dryer for convenience
nd sfety. The method of connection of the socket is s
the gure below.
• To be sfe, plese mke improvements s soon s
possible ccording to the rules nd suggestions
mentioned bove.
• The pplince corresponds to protection clss I nd
my only be connected to  plug with  protective
conductor tht hs been instlled properly. When
connecting the pplince to the mins, mke sure
tht the mins voltge is correct. You cn nd more
informtion bout this on the rting plte.
• The electricl sfety of this tumble dryer cn only be
gurnteed when correctly erthed. It is essentil tht
this stndrd sfety requirement is met. If in ny doubt,
plese hve the household wiring system tested by 
qulied electricin. The mnufcturer cnnot be held
lible for the consequences of n indequte erthing
system (e.g. electric shock).
• WARNING: The socket nd the grounding wire
must be instlled by n electricin to prevent
incorrect instlltion or use of the socket nd to
gurntee the sfe use of electricity. No connection
of the grounding wire nd the neutrl wire, otherwise
the cbinet will be chrged, which is likely to cuse
the dnger of electric shock.
CAUTION: INJURY DANGER!
1. Do not disssemble nd instll the dryer under no
instruction or supervision.
2. Do not stck this dryer on wshing mchine without
stcking kits. Stcking kits re vilble to purchse
from Estto.
3. Do not len on the opened door of the dryer.
4. Do not put ny objects on the dryer, such s  cndle or
electric cooker.
WARNING: EXPLOSION & FIRE DANGER!
• Plese do not dry the clothes with some mmble
substnces such s the col oil, lcohol or there will be
the explosion.
• Keep wy from open me And other sources of
ignition.
• The tumble dryer is not to be used if industril
chemicls hve been used for clening.
• Do not dry unwshed items in the tumble dryer.
• Items tht hve been soiled with substnces such s
cooking oil, cetone, lcohol, petrol, kerosene, spot
removers, turpentine, wxes nd wx removers should
be wshed in hot wter with n extr mount of
detergent before being dried in the tumble dryer.
• Items such s fom rubber (ltex fom), shower cps,
wterproof textiles, rubber bcked rticles nd clothes
or pillows tted with fom rubber pds should not be
dried in the tumble dryer.
• Oil-ected items cn ignite spontneously, especilly
when exposed to het sources such s in  tumble dryer.
• The items become wrm, cusing n oxidtion rection
in the oil. Oxidtion cretes het. If the het cnnot
escpe, the items cn become hot enough to ctch re.
Piling, stcking or storing oil-ected items cn prevent
het from escping nd so crete  re hzrd.
• Remove ll objects from pockets such s lighters
nd mtches.
• If it is unvoidble tht fbrics tht contin vegetble
or cooking oil or hve been contminted by hir cre
products be plced in  tumble dryer they should rst
be wshed in hot wter with extr detergent. This will
reduce, but not eliminte, the hzrd.
• WARNING: Never stop  tumble dryer before the end
of the drying cycle unless ll items re quickly removed
nd spred out so tht the het is dissipted.
• Openings must not be obstructed.
• The lint lter must be clened frequently.
• Lint must not to be llowed to ccumulte round
the dryer.
DISPOSAL OF PACKAGING
• The pckging is designed to protect the pplince
from dmge during trnsporttion. The pckging
mterils re environmentlly friendly nd should be
recycled. Recycling the pckging cn reduce the use
of rw mterils in the mnufcturing process nd the
mount of wste in lndll sites.
5
SAFETY INSTRUCTIONS
Power supply and grounding
•
• The dryer employs alternating current with the rated voltage and frequency.
When the voltage fluctuates between 6% of rated voltage, the dryer can work normally.
• A special power socket with a capacity 10A for the dryer had better be set beside the
dryer for convenience and safety. The method of connection of the socket is as the
figure below.
• To be safe, please make improvements as soon as
possible according to the rules and
suggestions mentioned above.
• The appliance corresponds to protection class I and may only be connected to a plug
with a protective conductor that has been installed properly. When connecting the
appliance to the mains, make sure that the mains voltage is correct. You can find more
information about this on the rating plate.
• The electrical safety of this tumble dryer can only be guaranteed when correctly
earthed. It is essential that this standard safety requirement is met. If in any doubt,
please have the household wiring system tested by a qualified electrician.
The manufacturer cannot be held liable for the consequences of an inadequate
earthing system (e.g. electric shock).
The socket and the grounding wire must be installed by an electrician to prevent
incorrect installation or use of the socket and to guarantee the safe use of
electricity. No connection of the grounding wire and the neutral wire, otherwise the
cabinet will be charged, which is likely to cause the danger of electric shock.
≥
Warning!
Grounding
Sfety Instructions (Continued)

esatto.house
7
PRECAUTIONS
• Instll or store the pplince where it will not be exposed to tempertures below freezing or
exposed to wter or wether, which could cuse permnent dmge nd invlidte the wrrnty.
• Thoroughly spin the lundry in wshing mchine before plcing into the dryer.
High spin speed cn reduce the drying time nd sve energy.
• Do not wsh or dry rticles tht hve been clened in, wshed in, soked in or spotted with
mmble, combustible or explosive substnces (such s wx, oil, pint, gsoline, degresers,
dry-clening solvents, kerosene, etc.).
• Keep re round the exhust ventiltion opening nd djcent surrounding res free from the
ccumultion of lint, dust nd dirt. An obstructed port might reduce the irow.
• Mke sure combustible sprys will not be close to the dryer when it is working, nd once the gs
leks, do not touch plug or strt/puse it.
• Never ttempt to operte this pplince if it is dmged, mlfunctioning, prtilly disssembled,or
hs missing or broken prts, including  dmged cord or plug.
• Do not llow children on or in the pplince. Close supervision of children is necessry when the
pplince is used ner children.
• Do not store plstic, pper or clothing tht my burn or melt on top of the dryer during opertion.
• Do not dry rticles contining rubber, plstic or similr mterils such s pdded brs, tennis
shoes, gloshes, bth mts, rugs, bibs, bby pnts, rincots, plstic bgs or pillows tht my melt
or burn. Some rubber mterils, when heted, cn under certin circumstnces produce re by
spontneous combustion.
• Do not use the mchine when your hnds re wet.
• The exhust ir must not be dischrged into  ue which is used for exhusting fumes from
pplinces burning gs or other fuels.
• The door shll be opened only fter the progrm of the drying mchine is completed. Do not open
the door before the progrm nished to void burns by hot stem or the heted pplince.

User Manual
8
YOUR CONTROL PANEL
PRODUCT OVERVIEW
8
Top board
Control panel
Door
Front panel
Side panel
Lint filter
Exhaust duct
Power plug
Door lock
Drum
>10cm
INSTALLATION
Product Description
Installation
Note: Please see the products you purchased in kind prevail.
Dryer should be placed in a ventilated area with
than 10cm distance from the wall. It is suggested there
are no obstacles within 1.5m in front of dryer to assure
ventilation.
not less
• Installation Position Selection
NOTE!
The digrms in this user mnul re for reference only. Your pplince my pper dierently.
Your Vented Dryer
Control Pnel
Door
Top Bord
Power Plug
Exhust Duct
Side Pnel
Door lock
Drum
Lint Filter
Front Pnel
23
1
1. O position: Turn the progrm dil to power on your dryer by selecting ny drying cycle.
2. Progrm dil: Select the cycle most pproprite to your needs for eective drying results.
3. Strt/Puse: Press the button to strt or puse the drying cycling.

esatto.house
9
Accessories
Below re the ccessories included with your Estto Vented Clothes Dryer.
Prt nme Quntity Imge/Digrm
Horizontl Screw Positioning Templte 1
ACCESSORY KIT CONTENTS
Expnsion Screw Bolt 4
ACCESSORY KIT CONTENTS
Hnging Brcket 2
ACCESSORY KIT CONTENTS
Plstic Cover 2
ACCESSORY KIT CONTENTS
Inverted Control Pnel Decl 1
Exhust Duct (1.5m Flex Tube) 1
8
Top board
Control panel
Door
Front panel
Side panel
Lint filter
Exhaust duct
Power plug
Door lock
Drum
>10cm
INSTALLATION
Product Description
Installation
Note: Please see the products you purchased in kind prevail.
Dryer should be placed in a ventilated area with
than 10cm distance from the wall. It is suggested there
are no obstacles within 1.5m in front of dryer to assure
ventilation.
not less
• Installation Position Selection
NOTE: The digrms  imges in this user mnul re for reference only. Your pplince my pper dierently.

User Manual
10
Instlltion
IMPORTANT!
If the power cord is dmged, it must be replced by
Estto or one of it’s uthorised service representtives.
Plese contct 1300 11 HELP (4357) nd ensure the
pplince is completely disconnected from the
power supply.
TRANSPORT
Move cutiously. Do not grsp ny slient prts of
mchine. The mchine door cnnot be used s the hndle
for trnsport.
CAUTION: DAMANGE INJURY DANGER!
Improper hndling of the pplince my result in injury.
• The pplince is very hevy. Never trnsport or crry
the pplince lone; lwys with the ssistnce of
nother person.
• Remove ll obstcles on the trnsport route nd from
the instlltion loction, e.g. open doors nd cler wy
objects lying on the oor.
• Do not use the open door s  hndhold.
• Remove ll pckge mteril before using the dryer.
• Before setting up the tumble dryer, check it for ny
externlly visible dmge.
Do not instll or use  dmged tumble dryer.
• Do not instll the tumble dryer in  room where there
is  risk of frost occurring. At tempertures round
freezing point the tumble dryer my not be ble to
operte properly. There is  risk of dmge if the
condensed wter is llowed to freeze in the pump
nd hoses.
INSTALLATION POSITIONING
• Children cn become entngled in the pckging lm
or swllow smll prts nd suocte.
Do not llow children to ply with the pckging.
• Dryer should be plced in  ventilted re with thn
10cm distnce from the wll. It is suggested there re
no obstcles within 1.5m in front of dryer to ssure
ventiltion.
• The pplince must not be instlled behind  lockble
door,  sliding door or  door with  hinge on the
opposite side to tht of the tumble dryer, in such  wy
tht  full opening of the tumble dryer door is restricted.
• Do not restrict the oor clernce through deep pile
crpets, strips of wood or similr.
This might cuse het built-up which would interfere
with the opertion of the pplince.
• It is recommended tht, for your convenience, the
mchine is positioned close to your wshing mchine.
• Do not stck this dryer on wshing mchine without
 stcking kit. Stcking kits re vilble to purchse
from Estto. Instlltion shll be done by the
mnufcturer, its service gent or similrly qulied
persons to void ny hzrds.
• The tumble dryer must be instlled in  clen plce,
where dirt does not ccumulte. Air must be ble to
circulte freely round the pplince. Do not obstruct
the ir inlet or the ir intke grilles t the bck of the
mchine.
• To keep vibrtion nd noise within minimum level when
the clothes dryer is in use, it must be plced on  rm
nd level surfce.
• Do not remove the feet of the pplince.
Note when instlling:
• Do not instll the dryer in the open ir or  plce where
it cn be dmged esily by rin;
• Do not plce the bck of dryer ner curtin or
something tht cn be moved by wind;
• Do not plce the dryer ner gs or mmble mterils.
LEVEL ADJUSTING
Once in its permnent operting position, check tht the
dryer is bsolutely level with the id of  spirit level. If it is
not, djust the feet by hnd or using  tool.
Note: If the dryer is not plced horizontlly (tilt ngle more
thn 2°), the dryer my not operte correctly.
POWER SUPPLY CONNECTION
• Mke sure tht the voltge of the power supply is the
sme s the electric speciction.
• Do not connect the dryer with the power connection
bord,  universl plug or socket, do not use multi-plug
dpters nd extension cbles.
8
Top board
Control panel
Door
Front panel
Side panel
Lint filter
Exhaust duct
Power plug
Door lock
Drum
>10cm
INSTALLATION
Product Description
Installation
Note: Please see the products you purchased in kind prevail.
Dryer should be placed in a ventilated area with
than 10cm distance from the wall. It is suggested there
are no obstacles within 1.5m in front of dryer to assure
ventilation.
not less
• Installation Position Selection
9
INSTALLATION
work properly.
If the dryer is not placed horizontally (tilt angle more than 2°), the dryer may not
Notice when installing:
• Do not install the dryer in the open air or a place where
it can be damaged easily by rain;
• Do not place the back of dryer near curtain or something
moved by wind;
• Do not place the dryer near gas or flammable materials.
•
• Connect one end of the flex tube to the back vent, then fix it firmly until it's tight.
• The other end of flex tube will be extended to outdoor, for the proper assembly please
refer to the below pictures.
Exhaust duct installation:
Note!
• Level Adjusting
Once in its permanent operating position,
check that the dryer is absolutely level with the aid
of a spirit level. If it is not, adjust the feet with a tool.

esatto.house
11
EXHAUST DUCT INSTALLATION
• Connect one end of the ex tube to the bck vent, then
x it rmly until it's tight.
• The other end of ex tube cn be extended externlly
outdoors, for the proper ssembly plese refer below.
WALL HANGING INSTALLATION
Step 1: Included Accessories
Conrm the following components re ll within
the included ccessories:
A. 2 × Hooks
B. 2 × Holders
C. 4 × Expansion bolts
D. 1 × Horizontal Screw Positioning Template
Step 2: Hnging Procedure
1 Conrm the construction type of the wll nd the
suitble position for instlltion.
. The wll must be solid concrete. Tip: Knock the wall
with the shank end of a rubber hammer. If the wall is
solid concrete, the sound will be crisp; if it is cavity
wall, the sound will be mued. For  cvity wll,
tlk to  professionl builder before ttempting
instlltion.
b. Do not hng the dryer on the wll if the wll is
not solid.
c. CAUTION: Ensure power cord nd plug is ccessible
nd reches  power source.
2 The distnce in front of the wll must be more
thn 150cm.
3 Pste the instlltion positioning pper to the solid
concrete wll.
. Drw  line with  level, nd ttch the positioning
pper bsed on the line. Note: Ensure the screw holes
do not overlap with power outlets or taps nearby.
b. The bottom edge of the positioning pper must be
45cm+ higher thn the oor. Remove the dhesive
pper behind the positioning pper, nd pste the
positioning pper to the wll horizontlly.
4 Fix the hook to wall and then x the hook with an
expansion bolt to the wall.
a. Take out the expansion bolt from the accessories.
Insert the bolt and expansion tubular into the drilled
holes. Insert one nut into the bolt. To prevent the
thread being damaged, don't expose the end-thread
of the bolt. Then hammer the 4 bolts into the
holes orderly.
b. After the bolts are hammered into the wall, screw
o the nuts and expose the bolts. Then insert one
auxiliary tube to the bolt, and hammer the tube until
the expansion tubular is ush with the wall surface.
The expansion tubular should now be fully expanded.
c. Next, take out the hook and insert it to the bolt.
Fasten the hook with a socket or a wrench.
9
INSTALLATION
work properly.
If the dryer is not placed horizontally (tilt angle more than 2°), the dryer may not
Notice when installing:
• Do not install the dryer in the open air or a place where
it can be damaged easily by rain;
• Do not place the back of dryer near curtain or something
moved by wind;
• Do not place the dryer near gas or flammable materials.
•
• Connect one end of the flex tube to the back vent, then fix it firmly until it's tight.
• The other end of flex tube will be extended to outdoor, for the proper assembly please
refer to the below pictures.
Exhaust duct installation:
Note!
• Level Adjusting
Once in its permanent operating position,
check that the dryer is absolutely level with the aid
of a spirit level. If it is not, adjust the feet with a tool.
A B C D

User Manual
12
Instlltion (Continued)
5 Fix the holder to the machine. Place the unpackaged
dryer on the oor. Unscrew the two screws* at the back
of the machine with a cross screwdriver. Take out the
holder in the kit. Press the screws* into the holes on the
holder and then fasten them into the original screw holes.
6 Transfer nozzle and air outlet extension pipe installation
steps (when the machine is mounted upside down)
a. Take out the nozzle, aligning with the rear air outlet,
and then push the nozzle into the air outlet.
b. Align one end of the air outlet extension pipe with
the card slot of the rotary nozzle, and force the air
outlet extension pipe into the rotary nozzle while
rotating. Install the air outlet extension pipe correctly
to prevent machine anomalies and hidden dangers
caused by incorrect installation.
7 Lift the dryer (two people) and direct the slots at the
back of the washing machine to the hooks. Lastly, insert
the hooks with some force to the slots.
CAUTION: WEIGHT HAZARD!
Two or more people required to lift nd instll the dryer.
Step 8: When ll of the instlltion procedures re nished,
test the mchine by powering it on.
IMPORTANT!
Plese ensure tht the dyer is only ever instlled in
n internl environment only (nd not outside), or n
environment where the dryer could become wet. Never
plce the dryer ner combustible surfces (such s curtins)
nd ensure the dryer isn’t operting ner gs or other
mmble mterils. Refer to Sfety Instructions within this
user mnul.
NOTE: The imges in this user mnul re for reference
only. Your pplince my pper dierently.
Wall Hanging Installation Manual
1. Accessories include components:
hooks (2), holders (2), expansion bolts (4), installation
positioning paper (1), and installation manual (1).
Hook Holder Expansion
Bolt
Installation
Positioning Paper
When hang
straight,Hang the
hooks into the
two holes.
When hang
upside down,
Hang the hooks
into these two holes.
When hang upside
down, Fix the holder
at the position of the
two screws.
When hang straight,
Fix the holder at the
position of the two
screws.
(Applicable to 6kg and 7kg models)
Wall Hanging Installation Manual
1. Accessories include components:
hooks (2), holders (2), expansion bolts (4), installation
positioning paper (1), and installation manual (1).
Hook Holder Expansion
Bolt
Installation
Positioning Paper
When hang
straight,Hang the
hooks into the
two holes.
When hang
upside down,
Hang the hooks
into these two holes.
When hang upside
down, Fix the holder
at the position of the
two screws.
When hang straight,
Fix the holder at the
position of the two
screws.
(Applicable to 6kg and 7kg models)
Hng the hooks
into these two holes
for inverted wll
mount instlltion.
Hng the hooks
into these two holes
for upright wll
mount instlltion.
Wall Hanging Installation Manual
1. Accessories include components:
hooks (2), holders (2), expansion bolts (4), installation
positioning paper (1), and installation manual (1).
Hook Holder Expansion
Bolt
Installation
Positioning Paper
When hang
straight,Hang the
hooks into the
two holes.
When hang
upside down,
Hang the hooks
into these two holes.
When hang upside
down, Fix the holder
at the position of the
two screws.
When hang straight,
Fix the holder at the
position of the two
screws.
(Applicable to 6kg and 7kg models)
Fix the holders t
these two screw
positions for inverted
wll mount instlltion.
Fix the holders t
these two screw
positions for upright
wll mount instlltion.
a b

esatto.house
13
Operting Instructions
BEFORE FIRST USE
Before rst use, plese use some soft fbric to clen the inside drum.
1. Put some clen rgs into the drum
2. Plug the power
3. Rotte the progrm dil to select the 15 minute drying cycle.
4. Press Start/Pause button
5. After nishing this progrm, plese refer to the “Mintennce nd Clening” section to clen the door lter.
BEFORE USING THE DRYER
1. Before drying, thoroughly spin the lundry in wshing mchine.
High spin speed shortens the drying time nd sves energy.
2. For uniform drying result, sort the lundry ccording to fbric type nd select the pproprite drying progrm.
3. Before drying, plese close zips, hooks nd eyelets, button, tie fbric belts, etc.
4. Remove ll objects from pockets such s lighters nd mtches.
5. Sew in or remove under wiring from brs.
6. Close duvet covers nd pillow cses to prevent smll items from being rolled up inside them.
7. Leve jckets open nd undo ny long zips so tht textiles dry evenly.
8. Do not over dry the clothes, becuse over dried clothes cn dmge fbric or crese clothing.
9. Do not dry the rticles contining rubber or similr elstic mterils.
10. Keep the re round the tumble dryer clen. Col dust or our my cuse n explosion.
11. The door shll be opened only fter the progrm of the tumble dryer is nished to void burns.
12. Clen the lint lter fter ech use to void extension of drying time nd increse of energy consumption.
13. Do not dry clothes fter dry-clen process.
APPROXIMATE WEIGHTS OF DRY CLOTHES
Note:
• Do not overlod the dryer.
• Do not put more clothing in the dryer thn the rted 7kg cpcity.
• Do not dry dripping wet lundry, it my dmge the dryer or lundry nd my even cuse  re.
• Not suitble for silk or woolen textiles.
Only dry lundry suitble for tumble drying. Regrd the lundry cre lbels:
14
OPERATION
• Do not dry dripping wet laundry. The dryer might get damaged
• Do not put more load than rated.
Note!
The reference weight of dry clothes (weight per item)
Sweater
(mixed 800g)
Jacket
( 800g ) cotton
Jeans
(800g)
Bath Towel
( 900g )cotton
Single bedsheet
( 600g )cotton
T-Shirt
( 180g )cotton
Work clothes
( 1120g)
Underwear
(cotton 70g )
Pyjamas
( 200g)
Socks
( 50g )mixed-weave
Shirt
( 300g )cotton
Only dry laundry suitable for tumble drying. Regard the laundry care labels:
Suitable for tumble drying
Normal drying process: Drying in the tumbler is possible under normal load and
temperature 80°.
Mild drying process: Caution is appropriate when tumble drying. Select mild
process with reduced thermal action.
Do not tumble dry: Articles unsuitable for drying in the tumbler.
Suitble for tumble drying
14
OPERATION
• Do not dry dripping wet laundry. The dryer might get damaged
• Do not put more load than rated.
Note!
The reference weight of dry clothes (weight per item)
Sweater
(mixed 800g)
Jacket
( 800g ) cotton
Jeans
(800g)
Bath Towel
( 900g )cotton
Single bedsheet
( 600g )cotton
T-Shirt
( 180g )cotton
Work clothes
( 1120g)
Underwear
(cotton 70g )
Pyjamas
( 200g)
Socks
( 50g )mixed-weave
Shirt
( 300g )cotton
Only dry laundry suitable for tumble drying. Regard the laundry care labels:
Suitable for tumble drying
Normal drying process: Drying in the tumbler is possible under normal load and
temperature 80°.
Mild drying process: Caution is appropriate when tumble drying. Select mild
process with reduced thermal action.
Do not tumble dry: Articles unsuitable for drying in the tumbler.
Norml drying process:
Drying in the tumbler is possible under norml lod nd temperture 80°.
14
OPERATION
• Do not dry dripping wet laundry. The dryer might get damaged
• Do not put more load than rated.
Note!
The reference weight of dry clothes (weight per item)
Sweater
(mixed 800g)
Jacket
( 800g ) cotton
Jeans
(800g)
Bath Towel
( 900g )cotton
Single bedsheet
( 600g )cotton
T-Shirt
( 180g )cotton
Work clothes
( 1120g)
Underwear
(cotton 70g )
Pyjamas
( 200g)
Socks
( 50g )mixed-weave
Shirt
( 300g )cotton
Only dry laundry suitable for tumble drying. Regard the laundry care labels:
Suitable for tumble drying
Normal drying process: Drying in the tumbler is possible under normal load and
temperature 80°.
Mild drying process: Caution is appropriate when tumble drying. Select mild
process with reduced thermal action.
Do not tumble dry: Articles unsuitable for drying in the tumbler.
Mild drying process:
Cution is pproprite when tumble drying. Select mild process with reduced therml ction.
14
OPERATION
• Do not dry dripping wet laundry. The dryer might get damaged
• Do not put more load than rated.
Note!
The reference weight of dry clothes (weight per item)
Sweater
(mixed 800g)
Jacket
( 800g ) cotton
Jeans
(800g)
Bath Towel
( 900g )cotton
Single bedsheet
( 600g )cotton
T-Shirt
( 180g )cotton
Work clothes
( 1120g)
Underwear
(cotton 70g )
Pyjamas
( 200g)
Socks
( 50g )mixed-weave
Shirt
( 300g )cotton
Only dry laundry suitable for tumble drying. Regard the laundry care labels:
Suitable for tumble drying
Normal drying process: Drying in the tumbler is possible under normal load and
temperature 80°.
Mild drying process: Caution is appropriate when tumble drying. Select mild
process with reduced thermal action.
Do not tumble dry: Articles unsuitable for drying in the tumbler.
Do not tumble dry: Articles unsuitble for drying in the tumbler.
14
OPERATION
Do not put more load than rated.
• Do not dry dripping wet laundry. The dryer might get damaged
•
Note!
The reference weight of dry clothes (weight per item)
Sweater
(mixed 800g)
Jacket
( 800g ) cotton
Jeans
(800g)
Bath Towel
( 900g )cotton
Single bedsheet
( 600g )cotton
T-Shirt
( 180g )cotton
Work clothes
( 1120g)
Underwear
( 70g )cotton
Pyjamas
( 200g)
Socks
( 50g )mixed-weave
Shirt
( 300g )cotton
Only dry laundry suitable for tumble drying. Regard the laundry care labels:
Suitable for tumble drying
Normal drying process: Drying in the tumbler is possible under normal load and
temperature 80°.
Mild drying process: Caution is appropriate when tumble drying. Select mild
process with reduced thermal action.
Do not tumble dry: Articles unsuitable for drying in the tumbler.

User Manual
14
QUICK START
CAUTION!
Prior to using the dryer, ensure tht it is correctly instlled ccording to the instruction in this user mnul.
AFTER DRYING
The pplince will sound n lert fter the drying cycle is complete.
NOTE: The digrms in this user mnul re for reference only. Your pplince my pper dierently.
Plug in Lod the lundry Close the door
Turn knob to
desired progrm
Press Strt
Open the door
nd tke out
the lundry
Clen the lter Unplug the
mchine
Operting Instructions (Continued)
10
OPERATION
After Drying
Drying
Before use, please make sure the tumble dryer is installed properly.
Buzzer beep.
1
plug in
2
load
3
close the door
Quick Start
Note!
1
unload clean filter
3
unplug
2
Before Drying
start
Turn the knob to
select the program
10
OPERATION
After Drying
Drying
Before use, please make sure the tumble dryer is installed properly.
Buzzer beep.
1
plug in
2
load
3
close the door
Quick Start
Note!
1
unload clean filter
3
unplug
2
Before Drying
start
Turn the knob to
select the program
10
OPERATION
After Drying
Drying
Before use, please make sure the tumble dryer is installed properly.
Buzzer beep.
1
plug in
2
load
3
close the door
Quick Start
Note!
1
unload clean filter
3
unplug
2
Before Drying
start
Turn the knob to
select the program
10
OPERATION
After Drying
Drying
Before use, please make sure the tumble dryer is installed properly.
Buzzer beep.
1
plug in
2
load
3
close the door
Quick Start
Note!
1
unload clean filter
3
unplug
2
Before Drying
start
Turn the knob to
select the program
10
OPERATION
After Drying
Drying
Before use, please make sure the tumble dryer is installed properly.
Buzzer beep.
1
plug in
2
load
3
close the door
Quick Start
Note!
1
unload clean filter
3
unplug
2
Before Drying
start
Turn the knob to
select the program
10
OPERATION
After Drying
Drying
Before use, please make sure the tumble dryer is installed properly.
Buzzer beep.
1
plug in
2
load
3
close the door
Quick Start
Note!
1
unload clean filter
3
unplug
2
Before Drying
start
Turn the knob to
select the program

esatto.house
15
DRYING PROGRAMS TABLE
PROGRAM MAX LOAD RECOMMENDED USE / PROPERTIES
Auto Dry
Auto 5.0kg To utomticlly dry clothing of unknown mteril.
Cotton
7.0kg
To dry clothing of cotton mteril t stndrd dry therml process.
Cotton Extr To dry clothing of cotton mteril t extr dry therml process.
Cotton Light To dry clothing of cotton mteril t light dry therml process.
Synthetics —
3.0kg
To dry synthetic textiles such s synthetics, cotton nd blended fbrics,
tht re not comptible for ironing, t stndrd dry therml process.
Mix —To dry mixed fbrics from cotton nd synthetics t extr dry therml process.
If you cnnot determine wht your lundry mteril is, we recommend this setting.
Delicte —0.6kg To dry delicte lundry tht is suitble for drying or lundry dvised
to be hnd wshed t  low temperture t light dry therml process.
Refresh — — To ir items without heting for 20 minutes. We recommend this setting for
refreshing clothes kept in closed environment for  long periods time.
Time Dry
15' —15 minute drying cycle t stndrd dry therml process.
30' —30 minute drying cycle t stndrd dry therml process.
45' —45 minute drying cycle t stndrd dry therml process.
60' —1 hour drying cycle t stndrd dry therml process.
90' —1.5 hour drying cycle t stndrd dry therml process.
120' —2 hour drying cycle t stndrd dry therml process.
Recommended setting for bed sheets, quilt covers nd other bulky lods.
150' —2.5 hour drying cycle t stndrd dry therml process.
NOTE!
• The progrms bove re only recommendtions.
You my choose the pproprite progrm ccording to your needs nd lifestyle.
• The room temperture nd humidity will ect the drying time.
• Check the clothes cre lbel nd choose the corresponding progrm ccordingly.

User Manual
16
Clening  Mintennce
CLEANING AND CARE
WARNING!
• Disconnect the power cord before cleaning.
• Clean the dryer with a clean damp cloth only.
• Do not use solvents, abrasive cleaners, glass cleaners or all-purpose
cleaners.
These could damage plastic surfaces and other parts.
• Do not rinse water over the machine directly.
CLEANING YOUR DRYER
• Prepare a clean damp cloth using clean water.
• Clean the door, especially the inside window.
• Clean the seal around the door opening.
• Take out the lter, clean the sealing and air ow openings.
• Before starting the dryer, dry all parts with a soft cloth.
CLEANING THE DOOR FILTER
Make sure you clean the door lter after each cycle.
1. Open the door.
2. Take out the door lter by pulling it straight up.
3. Open the lter and remove the lint on the lter.
You can use water, a cloth or your hands to help clean it.
4. If the lter is cleaned by a damp cloth or water, please ensure that the lter is thoroughly dried
before reinstalling it.
WARNING!
• The u accumulated on the lter will block the air circulation.
Not cleaning the lter regularly will increase drying time and energy consumption.
• Disconnect the power cord before cleaning!
• Do not operate the dryer without the lter!
15
Filter clean
•
•
•
Clean the lint filter after each use.
Remove the filter by pulling it straight up.
Filter cleaning
Use a wiping cloth or your hands to remove lint.
Install filter
If the filter is cleaned by damp cloth
or water, please dry thoroughly before installation.
Cleaning cabinet and drum
WARNING!
• Disconnect the power cord before cleaning!
• Clean the dryer with a wet cloth which is
only damped by clean water.
• Do not rinse water over the machine directly.
• Do not use solvents, abrasive cleaners, glass
cleaners or all-purpose cleaners. These could
damage plastic surfaces and other parts.
• Before starting the dryer, dry all parts with a soft cloth.
MAINTENANCE
Cleaning and Care
15
Filter clean
•
•
•
Clean the lint filter after each use.
Remove the filter by pulling it straight up.
Filter cleaning
Use a wiping cloth or your hands to remove lint.
Install filter
If the filter is cleaned by damp cloth
or water, please dry thoroughly before installation.
Cleaning cabinet and drum
WARNING!
• Disconnect the power cord before cleaning!
• Clean the dryer with a wet cloth which is
only damped by clean water.
• Do not rinse water over the machine directly.
• Do not use solvents, abrasive cleaners, glass
cleaners or all-purpose cleaners. These could
damage plastic surfaces and other parts.
• Before starting the dryer, dry all parts with a soft cloth.
MAINTENANCE
Cleaning and Care

esatto.house
17
SAFETY RESET
• This dryer has a safety auto-o switch which is activated by high temperatures.
• If your dryer is not heating this button must be reset, before the dryer can heat again.
You may need to wait 10 minutes for cooling down.
• The safety reset button is located on the backboard.
• The most common reason for the dryer to overheat is a blocked lter.
• Clean the lint lter after each cycle to prevent overheating of the dryer.
The auto-o switch may operate for the following reasons:
• Lint lter is blocked.
• Exhaust outlets blocked at the back of the dryer.
• Open the windows or the door, if there is poor ventilation in the room.
• Lightweight garment (eg. handkerchief) is suck over the lter.
The Safety Reset button
Use your nger or a pencil to press the button in until you feel a click.
16
Safety reset
1. This dryer has a safety cut out switch which is activated by temperature.
2. If your dryer is not heating this button must be reset, before the dryer can heat again.
You may need to wait 10 minutes for cooling down.
The safety reset button is on the backboard.
3. The most common reason for the dryer to overheat is a blocked filter.
4.Clean the lint filter after each cycle to prevent overheating of the dryer.
The cut out switch may operate for the following reasons:
1. Lint filter is blocked.
2. Exhaust outlets blocked at the back of the dryer.
3. Open the windows or the door, if there is poor ventilation in the room.
4. Lightweight garment eg. handkerchief, sucked over the filter.
MAINTENANCE
Safety Reset Button
Use your finger or a pencil to press the button in until you feel it click.

User Manual
18
Troubleshooting
OPERATION IN CASE OF EMERGENCY
In the event of an emergency you should:
• Switch o all controls.
• Switch the washing machine o at the power point or at the fuse box.
• Call the Residentia Support Team on 1300 11 HELP (4357).
Some minor faults can be xed by referring to the instructions given in the Troubleshooting section
below. There is also a self-help section online at https://support.residentiagroup.com.au/
DESCRIPTION POSSIBLE CAUSES SOLUTION
Dryer does not start
• Power cut o.
• The power plug is not plugged tight.
• The dryer is overloaded.
• The temperature fuse is damaged.
• Wait for electricity to be restored.
• Check the power socket, make sure the plug
is inserted tightly.
• The clothes must be spun and drying load
can not exceed the rated capacity.
• Restore the temperature fuse.
Dryer gets hot or produces
a burnt smell
• The lint lter is full.
• The exhaust duct is clogged.
• Ensure that you clean the lint lter after
each cycle.
• Clean the exhaust duct.
Clothes are too dry
• The machine is overloaded
• Clothes are not taken out in time after
the cycle ended.
• Clothes are not sorted properly.
• The selected program temperature is
too high.
• Do not exceed the rated capacity.
• Take clothes out immediately after the cycle
has ended.
• Observe the care labels on your clothing.
Clothes have shrunk • The selected program temperature is
too high.
• Observe the care labels on your clothing.
• If items are sensitive to shrinkage, examine
the clothes when dry. Take our the clothes
when damp and hang them up until they are
completely dry.
Pilling on clothes • Laundry is sensitive to rubbing.
• Use a fabric softener to lubricate bres.
You can spray laundry starch on cu and
neckline when ironing clothes. Turn the
laundry inside out to avoid pilling.
NOTE!
• Hevy wet clothes turning nd bumping will cuse noise ccordingly while to dryer runs.
• During the drying cycle, the mchine will crete irow, which will cuse noise when hitting the drum.

esatto.house
19
ERROR MESSAGES AND SOLUTIONS
WARNING! Never dismantle the dryer.
INDICATION REASON SOLUTION
The indicator light ashes 4
times and turns of for 3 second
intervals.
• Temperature sensor is short
circuited or broken
• PCB failure. Please contact the Residentia Group support
term on 1300 11 HELP (4357).
The indicator light ashes 4
times and turns of for 5 second
intervals.
PCB Fault.
WARNING!
• Only authorised technicians can carry out repairs.
• Please call the Residentia Group support team if you are experiencing a fault.
Technicl Specictions
Below outlines the technical specications for your Esatto Vented Clothes Dryer.
Model EVD700W
Rated Capacity 7.0 kg
Size 595W  555D  840H (mm)
Net Weight 33.5kg
Rated Input Power 2000W
Rated Voltage 220–240V~
Rated Frequency 50Hz
Ambient temperature +5° C – +35° C
Note: The rated capacity is the maximum capacity to be dried at one time.
Make sure that the dry clothes which are loaded into the appliance do not
exceed the rated capacity.

User Manual
20
AUSTRALIA WARRANTY TERMS & CONDITIONS
LAUNDRY APPLIANCES
This document sets out the terms and conditions of the
product warranties for Residentia Group Appliances. It is
an important document. Please keep it with your proof of
purchase documents in a safe place for future reference
should you require service for your Appliance.
1. IN THIS WARRANTY
(a) ‘acceptable quality’ as referred to in clause 10 of this
warranty has the same meaning referred to in the ACL;
(b) ‘ACL’ means Trade Practices Amendment (Australian
Consumer Law) Act (No.2) 2010;
(c) ‘Appliance’ means any Residentia Group product
purchased by you accompanied by this document;
(d) ‘ASR’ means Residentia Group authorised service
representative;
(e) ‘Residentia Group’ means Residentia Group Pty Ltd
of 165 Barkly Ave, Burnley VIC 3121, ACN 600 546 656
in respect of Appliances purchased in Australia;
(f ) ‘major failure’ as referred to in clause 10 of this
warranty has the same meaning referred to in the ACL
and includes a situation when an Appliance cannot
be repaired or it is uneconomic for Residentia Group,
at its discretion, to repair an Appliance during the
Warranty Period;
(g) ‘Warranty Period’ means:
(i) where the Appliance is used for personal,
domestic or household use (i.e. normal
single family use) as set out in the instruction
manual, the Appliance is warranted against
manufacturing defects for 24 months, following
the date of original purchase of the Appliance;
(h) ‘you’ means the purchaser of the Appliance not having
purchased the Appliance for re-sale, and ‘your’ has a
corresponding meaning.
2. This warranty only applies to Appliances purchased
and used in Australia and is in addition to (and does
not exclude, restrict, or modify in any way) any
non-excludable statutory warranties in Australia.
3. During the Warranty Period Residentia Group or its
ASR will, at no extra charge if your Appliance is readily
accessible for service, without special equipment and
subject to these terms and conditions, repair or replace
any parts which it considers to be defective. Residentia
Group or its ASR may use remanufactured parts to
repair your Appliance. You agree that any replaced
Appliances or parts become the property of Residentia
Group. This warranty does not apply to light globes,
batteries, lters, seals or similar perishable parts.
4. Parts and Appliances not supplied by Residentia Group
are not covered by this warranty.
Wrranty Informtion