American Dryer Corp. SL2020 User manual

ADC Part No. 450275
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: [phone] / Fax: [phone]
e-mail: [e-mail]
www.amdry.com
SL2020 Parts Manual
Phase 8 / HSI

Retain This Manual
In A Safe Place For Future Reference
This product embodies advanced concepts in
engineering, design, and safety. If this product
is properly maintained, it will provide many years
of safe, efficient, and trouble free operation.
ONLY properly licensed technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment
or specified in the installation manual included with the dryer.
The following “FOR YOUR SAFETY” caution must be posted
near the dryer in a prominent location.
We have tried to make this manual as complete as possible and hope you will
find it useful. The manufacturer reserves the right to make changes from time to
time, without notice or obligation, in prices, specifications, colors, and material,
and to change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ________________________________________________ MODEL NO. _________________
RESELLER’S NAME ________________________________________________________________________________
Serial Number(s) ____________________________________________________________________________________
___________________________________________________________________________________________________
___________________________________________________________________________________________________
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
FOR YOUR SAFETY
Do not store or use gasoline
or other flammable vapors
and liquids in the vicinity of
this or any other appliance.
SL2020

NOTES _______________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
Replacement parts can be obtained from your reseller
or the ADC factory. When ordering replacement parts from
the factory, you can FAX your order to ADC at [phone]
or telephone your order directly to the ADC Parts Department
at [phone]. Please specify the dryer model number
and serial number in addition to the description and part number,
so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict
your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the
descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier
on the instructions to be followed if the user smells gas.
These instructions must be posted in a prominent location
near the dryer.

4 American Dryer Corporation 450275-2
Parts Diagram

450275-2 www.amdry.com 5
Illus. No. Part No. Qty.Description
1 818659 1 Outer Top Assembly
2 818807 1 Right Side Panel Assembly
3 818808 1 Left Side Panel Assembly
4 818806 1 Back Guard Assembly
185024 1 Exhaust Bracket
150331 18 #8-18 x 1/2” T20 TORX
5 819392 1 Door Right Hand
6 170233 1 Door Handle
7 818115 1 Tumbler Assembly
115906 1 Tumbler Felt
401010 1 Adhesive (For Felt)
8 818805 2 Rear Tumbler Support
122200 2 Sail Switch
819188 2 S.A.F.E. Temperature Sensor Harness
819323 2 Phase 8 Hot Surface Ignition Sail Switch Assembly
9 153048 4 Inner Friction Pad
10 318891 2 Backup Washer 2 Screws
11 150445 4 1/4-20 x 3/4” Bolt, Black
12 818728 2 Left Rear Wheel Assembly
818729 2 Right Rear Wheel Assembly
180050 2 Support Wheel
13 100197 1 Belt
14 818655 2 Front Tumbler Support Assembly
819362 2 Front Tumbler Support Assembly with Auto Cycle
819357 2 Moisture Sensor Assembly
15 818713 2 Front Right Wheel Assembly
818714 2 Front Left Wheel Assembly
180050 2 Support Wheel
16 819196 2 Phase 8 Door Switch Assembly
17 818853 1 Top Trim PanelAssembly
154061 16 U-Nut Retainer
183129 16 #10-32 x 1/2” T20 Truss Head
112375 1 Solaris Oval Logo
18 818899 1 Phase 8.4 Coin Control Panel Assembly
819326 1 Phase 8.4 Non-Coin Control Panel Assembly
19 185108 1 Toe Panel with Slots
DETAIL 1
20 181125 2 1/4 hp Reversing 8-Pin Motor
819304 2 Drive Motor Assembly
21 153002 4 5/16” Split Lock Washer
22 152004 4 5/16-18 Hex Nut
23 153001 4 5/16” Flat Washer
24 185001 2 60 Hz 4-Pole Motor Sheave
154321 2 Allen Setscrew
25 318548 2 Motor Base
DETAIL 2
26 818213 1 Phase 8 Coin Acceptor Assembly
818661 1 Coin Vault Assembly
27 819308 1 Phase 8 Display Mount Stud Assembly
28 137280 1 Computer Board
136116 1 3-Amp Fast-Acting Fuse
136054 2 15-Amp / 250V / 3ab Slo-Blo Fuse
29 319187 1 Cover
30 318929 1 Control Panel Hinge (Left)
318930 1 Control Panel Hinge (Right)
154200 4 5/32” Rivet for 1/8-5/16”
31 818899 1 Coin Control Panel Assembly
32 883978 1 Lock with Cam (No Key)
160140 1 X4451 Key
33 112586 2 Non-Coin Membrane Keypad
112587 2 Coin Membrane Keypad
Parts List

6 American Dryer Corporation 450275-2
Parts Diagram

450275-2 www.amdry.com 7
Illus. No. Part No. Qty.Description
DETAIL 3
34 143025 1 3/8” x 3/4” N.P.T. Nylon Hose Adaptor
35 143155 2 3/8” Brass Street Elbow
36 143152 2 1/4” Comp x 1/8” M.P.T. Straight Connection
37 319231 2 S.A.F.E. Valve Bracket
38 150331 2 #8-18 x 1/2” T20 TORX
39 165120 2 S.A.F.E. Valve 24V DC
40 319231 2 S.A.F.E. Valve Bracket
41 143581 2 S.A.F.E. 3/8” N.P.T. Spray Nozzle
42 143155 1 3/8” Brass Street Elbow
43 143183 1 7/16-20 x 3/8” N.P.T. Adaptor Brass
44 143236 1 3/8” Brass Pipe Cross
143099 1 3/8” Copper Tubing
143303 1 3/8” N.P.T. Brass Locknut
136987 1 Water Pressure Switch
819337 1 Phase 8 Deltrol S.A.F.E. Assembly
DETAIL 4
45 185023 2 Gas Pipe Bracket
46 154356 2 U-Bolt with Nuts
47 185179 2 Hot Surface Ignition Gas Pipe
48 130500 2 Radiant Control Sensor
49 183145 2 #8-32 x 7/8” Hex Conical
50 318979 2 Gas Train Support Bracket
51* 140873 2 #30 Burner Orifice (Natural Gas)
140874 2 #49 Burner Orifice (Liquid Propane Gas)
52 185061 2 Hot Surface Ignition Burner Base
53 143318 2 Brass Adaptor
54 128944 2 25m Gas Valve 120 VAC 60 Hz
* 884253 2 ‘M’ Valve 80k Btu Liquid Propane Kit
55 183144 2 Inshot Burner Tube Hot Surface Ignition
56 185063 2 Hot Surface Ignition Ignitor Bracket
57 128910 2 Hot Surface Ignitor 80V
58 183112 2 Thermostat
59 150331 16 #8-18 x 1/2” T20 TORX
60 185066 2 Burner Cone
818891 2 120V 60 Hz Gas Train Assembly
132029 2 350VAAutotransformer (208-240)
DETAIL 5
61 819347 2 Lint Box Top Stud Assembly
62 130112 2 Thermostat 225º Automatic
63 122002 2 Door Switch
64 818804 2 Lint Coop Blower Assembly
65 318866 2 4 Circuit Connection Plate
66 150331 2 #8-18 x 1/2” T20 TORX
67 318224 2 Blower Housing Rear Support Bracket
68 818725 2 Blower Housing
181139 Blower Housing
(for models mfd. as of April 2006)
319904 Blower Housing Mount
(for models mfd. as of April 2006)
818975 120V Blower Motor Assembly
819277 2 230V Blower Motor Assembly (Phase 8)
69 153049 4 Washer
70 153024 4 #10 Split Lock Washer
71 152008 8 #10-32 Hex Nut
72 100623 2 25MFD Capacitor 440 VAC 50-60 Hz
73 117604 20 1/8” Thick x 3/8” Wide Neoprene Sponge Tape
74 818803 2 Lint Box Assembly
75 818986 2 Phase 8 Exhaust Temperature SensorAssembly
76 154007 4 1/4” Push-On Fastener
77 117604 2 1/8” Thick x 3/8” Wide Neoprene Sponge Tape
DETAIL 6
78 130123 2 300º F Temperature Sensor
79 120089 2 5.4 kW/240V 8.1 kW/416V Element
80 –––––– – Oven Contactor
81 318361 2 Electric Oven Bracket
82 819345 4 Cold Rolled Steel Lint DrawerAssembly
819287 4 Lint Drawer Handle Plate Assembly
* Contact factory for elevations above 2,000 feet.
Parts List

ADC Part No. 450275 2 - 05/03/06 - 0