Esatto EO9060XL9M User manual

Version
V1.2 1022
Everything you need
for your 90×60cm
9 Function Built-in Oven
is in this User Mnul
Model/s
EO9060XL9M

User Manual
2
Welcome
Congrtultions on purchsing your new Built-in Oven. The Estto brnd is
proudly distributed within Austrli by Residenti Group Pty Ltd.
Plese refer to the wrrnty crd t the rer of this mnul for informtion
regrding your product’s prts nd lbour wrrnty, or visit us online t:
www.residenti.group
At Residenti Group, we re customer obsessed nd our Support Tem re there
to ensure you get the most out of your pplince. Should you wnt to lern more
bout your new oven, it's fetures or importntly tking cre of the pplince,
our Support Tem re here to help.
You cn use our online Support Centre t nytime by visiting:
http://support.residentigroup.com.u
Or you cn contct us vi phone by diling: 1300 11 HELP (4357).
It is importnt tht you red through the following use nd cre mnul
thoroughly to fmilirise yourself with the instlltion nd opertion
requirements of your pplince to ensure optimum performnce.
Agin, thnk you for choosing n Estto pplince nd we look forwrd
to being of service to you.
Kind Regrds,
The Residenti Tem
Residenti roup
—
Head Office
165 Brkly Avenue
Burnley, Victori
Austrli 3121
—
ACN
600 546 656
—
Online
residenti.group
www.estto.house
@estto.house
—
Postage
PO Box 5177
Burnley, Victori
Austrli 3121
—
Telephone
1300 11 4357
www.estto.house

esatto.house
3
Pge 2
Welcome
Pge 4
Sfety Instructions
Pge 8
Instlltion
Instructions
Pge 12
Your Built-in Oven
Pge 13
Technicl
Specictions
Pge 14
Opertion
Instructions
Pge 16
Mintennce
Clening
Pge 20
Troubleshooting
Contents
Pge 23
Purchse Detils
Pge 24
Wrrnty

User Manual
4
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP
FOR FUTURE REFERENCE
Red this mnul thoroughly before rst use,
even if you re fmilir with this type of product.
The sfety precutions enclosed herein reduce
the risk of re, electric shock nd injury when
correctly dhered to. Mke sure you understnd
ll instructions nd wrnings.
Keep the mnul in sfe plce for future
reference, long with the completed wrrnty
crd nd purchse receipt. If you sell or trnsfer
ownership of this product, pss on these
instructions to the new owner.
Alwys follow bsic sfety precutions nd
ccident prevention mesures when using n
electricl pplince. The following sttements you
will see in this booklet hve these menings:
WARNING: Indicting informtion concerning
your personl sfety.
CAUTION: Indicting informtion on how to
void dmging the pplince or cbinetry.
IMPORTANT: Indicting tips nd informtion
bout use of the pplince.
USAGE CONDITIONS AND RESTRICTIONS
• Domestic use only: This pplince is intended
for indoor household use only. It is not intended
for commercil, industril or outdoor use. It is not
intended for use in recretionl vehicle.
• Purpose: Do not use this pplince for nything
other thn its intended purpose. Other uses re
not recommended nd my cuse re, electric
shock or personl injury.
• Attchments: The use of ttchments is not
recommended by the pplince mnufcturer
nd distributor s they my be hzrdous.
• Improper use: Dmge due to improper use,
or repirs mde by unqulied personnel will
void your wrrnty. We ssume no libility
for ny eventul dmges cused by misuse
of the product or noncomplince with these
instructions.
BEFORE USING YOUR APPLIANCE
This mnul explins the proper use of your new
Estto oven. Plese red this mnul crefully
before using the product. This mnul should be
kept in sfe plce for hndy reference.
This oven is domestic pplince which hs been
mnufctured nd tested to comply with Austrlin
nd New Zelnd Stndrds.
This oven must only be instlled in ccordnce with
the instructions provided. Incorrect instlltion my
cuse hrm to persons, dmge property nd void
the product’s wrrnty.
Red the following crefully to void dmge
or injury.
IMPORTANT: Check for ny dmge or mrks.
If you nd the pplince is dmged or mrked,
you must report it within 7 dys if you wish to clim
for dmge/ mrks under the mnufcturer’s
wrrnty. This does not ect your sttutory rights.
Sfety Instructions

esatto.house
5
SAFETY INSTRUCTIONS
• Before the instlltion nd use of the pplince,
crefully red the supplied instructions.
• The mnufcturer is not responsible if n
incorrect instlltion nd use cuses injuries
nd dmges.
• Alwys keep the instructions with your pplince
for future reference.
• Do not use the oven unless you re wering
something on your feet. Do not touch the oven
with wet or dmp hnds or feet.
• Some prts of pplince my keep its het for
long time; it is required to wit for it to cool down
before touching onto the points tht re exposed
to the het directly.
• If you will not use the pplince for long time,
it is dvised to turn the plug o.
WARNING: To prevent ny dmges to your nd
others’ life or property, you hve to follow the
sfety notes.
WARNING: Cution, risk of re!
• Do not store items on the cooking surfces.
• This pplince is intended for cooking.
It should not be used for other purposes
like heting room.
• Ensure tht the oven door is completely closed
fter putting food inside the oven.
CHILDREN VULNERABLE PEOPLE SAFETY
WARNING: Risk of suoction, injury or permnent
disbility.
• This pplince cn be used by children ged
from 8 yers nd bove nd persons with
reduced physicl, sensory or mentl cpbilities
or lck of experience nd knowledge if they hve
been given supervision or instruction for the
opertion of the pplince by person who is
responsible for their sfety.
• The ccessible prts my be hot during use.
• Do not let children ply with the pplince.
• Keep ll pckging wy from children.
• Keep ll detergents wy from children.
• Keep children nd pets wy from the pplince
door when it is open.
• Do not llow children to go ner the oven when it
is operting, especilly when the grill is on.
• Clening nd user mintennce shll not be
mde by children without supervision.
BEFORE INSTALLATION
• Remove ll the pckging.
• Do not instll or use dmged pplince.
• Alwys move the pplince cutiously. Do not
use the mchine door or the hndle of oven, to
lift the pplince.
• When the oven is rst switched on, it my give
o n unplesnt smell. This is due to the
bonding gent used for the insulting pnels
within the oven. Plese run the new empty oven
with the conventionl cooking function, 240 °C
for 45 minutes to clen oil impurities inside
the cvity.
• During the rst time use, it is completely norml
tht the oven will show slight signs of smoke nd
unplesnt odours. Plese wit for the smell to
cler before putting food into the oven.
• Plese use this product under the open
environment.
• The pplince nd its ccessible prts become
hot during use. Cre should be tken to void
touching heting elements.
• If the surfce is crcked, switch o the pplince
to void the possibility of electric shock.
• During use, the pplince becomes very hot.
Cre should be tken to void touching heting
elements inside the oven.
• Ensure tht the pplince is switched o before
replcing the oven lmp to void the possibility of
electric shock.
• The mens for disconnection must be
incorported in the xed wiring in ccordnce
with the wiring specictions.
• Accessible prts my become hot during use.
• An ll-pole disconnection mens must be
incorported in the xed wiring in ccordnce
with the wiring rules.
• Cble xing point shll be protected.
• The pplince must be instlled by n uthorised
technicin nd put into use. The mnufcturer
is not responsible for ny dmge tht might
be cused by defective plcement, nd
instlltion by unuthorised personnel.
Plese contct 1300 11 HELP (4357) to rrnge
n uthorised technicin.

User Manual
6
Sfety Instructions (Continued)
ELECTRICAL CONNECTION
CAUTION: Risk of re nd electricl shock!
• This oven must be instlled nd connected to
its plce correctly ccording to mnufcturer
instructions nd by n uthorised service.
• In the cse of re, NEVER try to put out the
re with wter. Only shut down the device
circuit nd then cover the me with cover
or re blnket.
• Applince must be instlled in n oven enclosure
providing high ventiltion.
• Electricl connections of the pplince must
be mde only vi sockets hving erth system
furnished in complince with rules. Contct
n uthorised electricin if there is no socket
complying with the erthed system t where
pplince will be plced. Mnufcturing
compny is by no mens responsible for dmge
resulting from connection ofnon-erthed sockets
to pplince.
• Plug of your oven must be erthed; ensure
tht socket for the plug is erthed. Plug must
be locted in plce tht cn be ccessed
fter instlltion.
• Your oven hs been mnufctured s
220-240 V 50/60 Hz. AC power supply
complint nd requires 16 Amp fuse. If your
power network is dierent tht these indicted
vlues, refer to n electricin or your uthorised
service.
• When you need to replce the electricl fuse,
plese ensure tht electricl connection is mde
s follows:
• Phse (to live terminl) brown cble
• Blue cble to neutrl terminl
• Yellow-green cble to erth terminl
• Oven disconnecting switches must be in n
ccessible plce for nl user while oven is
in its plce.
• Power supply cble (plug in cble) mustn’t touch
hot prts of the pplince.
• If supply cord (plug in cble) is dmged, this
cord must be replced by the importer or its
service gent or n eqully competent personnel
to prevent hzrdous sitution.
WARNING: If the supply cord is dmged, it must
be replced by the mnufcturer or its service
gent or similrly qulied person in order to void
hzrd.
WARNING: All electricl work must be done in
ccordnce with locl nd ntionl electricl
codes s pplicble nd should be undertken by
licenced nd qulied persons only. Filure to follow
these instructions cn result in deth, re
or electricl shock.
APPLIANCE USE
WARNING: Risk of re, explosion, electric shock or
dmge to the pplince.
• Use this pplince in household only.
• Do not chnge the speciction of this oven.
• Do not sit or stnd on the open door.
• Plese do not close the mchine door with
excessive force
• When the door or drwer of oven is open do not
leve nything on it, you my unblnce your
pplince or brek the door.
• The pplinces re not intended to be operted
by mens of n externl timer or seprte
remote control system.
• The instructions for ovens tht hve shelves shll
include detils indicting the correct instlltions
of the shelves.

esatto.house
7
CARE CLEANING
CAUTION: Risk of injury or dmge to the oven.
• Before mintennce, dectivte the pplince
nd disconnect the mins plug.
• Do not use stem clener on the pplince.
• Clen the pplince with moist soft cloth.
Only use neutrl detergents. Do not use brsive
products, brsive clening pds, solvents or
metl objects.
• Do not use hrsh brsive cleners or shrp
metl scrpers to clen the oven door glss since
they cn scrtch the surfce, which my result in
shttering of the glss.
UNPACKING
During trnsporttion, protective pckging ws
used to protect the pplince ginst ny dmge.
After unpcking, plese dispose of ll elements of
pckging in wy tht will not cuse dmge to
the environment.
All mterils used for pckging the pplince re
environmentlly friendly; they re
100% recyclble nd re mrked with the
pproprite symbol.
CAUTION: During unpcking, the pckging
mterils (polythene bgs, polystyrene pieces, etc.)
should be kept out of rech of children.
HANDLING TRANSPORTATION
• Do not use the door nd/or hndle to crry or
move the pplince.
• Crry out the movement nd trnsporttion in
the originl pckging if possible.
• Py mximum ttention to the pplince while
loding/unloding nd hndling.
• Mke sure tht the pckging is securely closed
during hndling nd trnsporttion.
• Protect from externl fctors (such s humidity,
wter, etc.) tht my dmge the pckging.
• Be creful not to dmge the pplince due
to bumps, crshes, drops, etc. while hndling
nd trnsporting nd not to brek or deform it
during opertion.
DISPOSAL OF THE APPLIANCE
• Disconnect the pplince
from the mins supply.
• Cut o the mins cble
nd discrd it.
• Remove the door ctch to prevent children nd
pets to get closed in the pplince.
Old pplinces should not simply be disposed
of with norml household wste nd should be
delivered to collection nd recycling centre for
electric nd electronic equipment. A symbol shown
on the product, the instruction mnul or the
pckging shows tht it is suitble for recycling.
Mterils used inside the pplince re recyclble
nd re lbelled with informtion concerning this.
By recycling mterils or other prts from used
devices you re mking signicnt contribution to
the protection of our environment.
Informtion on pproprite disposl centres for
used devices cn be provided by your locl uthority.
DECLARATION OF COMPLIANCE
When you hve unpcked the oven, mke sure tht
it hs not been dmged in ny wy. If you hve ny
doubts t ll, do not use it: contct professionlly
qulied person. Keep pcking mterils such s
plstic bgs, polystyrene, or nils out of the rech
of children becuse these re dngerous to children.
SAFETY HINTS
Do not use the oven unless you are wearing something on your feet. Do not touch the oven
with wet or damp hands or feet.
For oven: Oven door should not be opened often during the cooking period.
The appliance must be installed by an authorized technician and put into use. The producer is
not responsible for any damage that might be caused by defective placement, and installation
by unauthorized personnel.
When the door or drawer of oven is open do not leave anything on it, you may unbalance your
appliance or break the door.
Some parts of appliance may keep its heat for a long time; it is required to wait for it to cool
down before touching onto the points that are exposed to the heat directly.
If you will not use the appliance for a long time, it is advised to plug i off.
FITTING THE OVEN INTO THE KITCHEN UNIT
Fit the oven into the space provided in the kitchen unit; it may be fitted underneath a work top or into
an upright cupboard. Fix the oven in position by screwing into place, using the two fixing holes in the
frame. To locate the fixing holes, open the oven door and look inside. To allow adequate ventilation,
the measurements and distances adhered to when fixing the oven.
IMPORTANT
If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit
that are next to the oven must be made of a heat resistant material. Ensure that the glues of units
that are made of veneered wood can withstand temperatures of at least 120 ºC. Plastics or glues
that cannot withstand such temperatures will melt and deform the unit, once the oven has been
lodged inside the units, electrical parts must be completely insulated. This is a legal safety
requirement. All guards must be firmly fixed into place so that it is impossible to remove them without
using special tools. Remove the back of the kitchen unit to ensure an adequate current of air
circulates around the oven. The hob must have a rear gap of at least 45 mm.
DECLARATION OF COMPLIANCE
When you have unpacked the oven, make sure that it has not been
damaged in any way. If you have any doubts at all, do not use it:
contact a professionally qualified person. Keep packing materials
such as plastic bags, polystyrene, or nails out of the reach of children
because these are dangerous to children.
t
5

User Manual
8
INSTALLATION WARNINGS
Ensure tht electricl instlltion is suitble
for the opertion the pplince. If not, cll n
electricin nd plumber to mke necessry
rrngements. Mnufcturing rm cn't be hold
responsible for dmges to rise due to opertions
by unuthorised people nd product wrrnty
becomes void.
WARNING: It is customer's responsibility to
prepre the loction the product shll be plced on
nd lso hve power utility prepred.
WARNING: The rules bout electricl locl
stndrds must be dhered to during product
instlltion.
WARNING: Check for ny dmge on the product
before instlling it. Do not hve product instlled if
it's dmged. Dmged products pose dnger for
your sfety.
INSTALLATION CONSIDERATIONS:
• Cooling fn shll tke extr stem out nd
prevent outer surfces of pplince from
overheting during opertion of oven.
This is necessry condition for better pplince
opertion nd better cooking.
• Cooling fn shll continue opertion fter
cooking is nished. Fn shll utomticlly stop
fter cooling is completed.
• A clernce must be left behind the enclosure
where you'll plce the pplince for ecient nd
good opertion.
• This clernce shouldn't be ignored s it's
required for ventiltion system of the pplince
to operte.
INSTALLATION LOCATION
• Product hs been designed to be mounted to
worktops procured from mrket. A sfe distnce
must be left between the product nd kitchen
wlls or furniture. See the digrms on the
following pges for proper distnces (vlues
in mm).
• Used surfces, synthetic lmintes
nd dhesives must be het resistnt.
(minimum 100°C)
• Kitchen cupbords must be level with product
nd secured.
• If there is drwer below the oven, rck must
be plced between oven nd drwer.
WARNING: Do not instll the product next to
refrigertors or coolers. The het emitted by the
product increses the energy consumption of
cooling devices.
WARNING: Do not use door nd/or hndle to crry
or move the product.
Figure 1
Instlltion Instructions
16
Important Warnings for Installation:
Cooling fan shall take extra steam out and
prevent outer surfaces of appliance from
overheating during operation of oven.
This is a necessary condition for better
appliance operation and better cooking.
Cooling fan shall continue operation after
cooking is nished. Fan shall automatically
stop after cooling is completed. A clearance
must be left behind the enclosure where
you'll place the appliance for efcient
and good operation.
This clearance shouldn't be ignored as it's required for ventilation
system of the appliance to operate.
Right Place For Installation
Product has been designed to be mounted to worktops procured from
market. A safe distance must be left between the product and kitchen
walls or furniture. See the drawing provided on the next page for proper
distances. (values in mm).
• Used surfaces, synthetic laminates and adhesives must be heat
resistant. (minimum 100°C)
• Kitchen cupboards must be level with product and secured.
• If there is a drawer below the oven, a rack must be placed between
oven and drawer.
WARNING: Do not install the product next to refrigerators or coolers. The
heat emitted by the product increases the energy consumption of cooling
devices.
WARNING: Do not use door and/or handle to carry or move the product.
Figure 1

esatto.house
9
INSTALLATION AND MOUNTING
• Plce of use for product must be locted before
strting instlltion.
• Product mustn't be instlled in plces which re
under the eect of strong ir ow.
• Crry the product with minimum two people.
Do not drg the product so tht oor isn't
dmged.
• Remove ll trnsporttion mterils inside
nd outside the product.
• Remove ll mterils nd documents from
within the product.
INSTALLATION REQUIREMENTS
• Product dimensions re provided in the Figure 2.
• Cbinetry surfces for mounting nd mounting
mterils to be used must hve minimum
temperture resistnce of 100 °C.
• Mounting cbin must be secured nd its oor
must be plne for product not to tilt over.
• Cbin oor must hve minimum strength tht
would hndle lod of 60 kg.
Figure 2
PLACING AND SECURING THE OVEN
• Plce the oven into the cbin with two or
more people.
• Ensure tht oven's frme nd front edge
of the cbinetry mtch uniformly.
• Supply cord must not be under the oven,
squeezed in between oven nd cbinetry
or bent.
• Fix the oven to the furniture by using the screws
provided with the product. Screws must be
mounted s shown in Figure 3 by pssing them
through plstics ttched to frme of the
product. Screws must not be overtightened.
Otherwise, screw sockets might be worn.
• Check tht oven doesn't move fter mounting.
If oven isn't mounted in ccordnce with
instructions, there is risk of tilt over
during opertion.
Figure 3
ELECTRICAL CONNECTION
• Mounting plce of the product must hve
pproprite electricl instlltion.
• Network voltge must be comptible with
the vlues provided on type lbel of product.
• Product connection must be mde in ccordnce
with locl nd ntionl electricl requirements.
• Before strting the mounting disconnect network
power. Do not connect the product to network
until its mounting is completed.
19
Figure 2
810
30 30
870
600
35
840
545
565
896
595
Figure 3
840
896
595
565
545
21
CONTROL PANEL
WARNING: The control panel above is only for illustration purposes.
Consider the control panel on your device.
Figure 5
A
1. Function button
2. Mechanical or digital timer
3. Thermostat
1 2 3
A

User Manual
10
INSTALLATION UNDER COUNTER
• Cbin must mtch the dimensions provided in
Figure 4
• A clernce must be provided t the rer prt
of the cbin s indicted in Figure 4 so tht
necessry ventiltion cn be chieved.
• After mounting, the clernce between lower
nd upper prt of the counter is indicted in
Figure 3 with "A". It's for ventiltion nd shouldn't
be covered.
Figure 4
19
Figure 2
810
30 30
870
600
35
840
545
565
896
595
Figure 3
19
Figure 2
810
30 30
870
600
35
840
545
565
896
595
Figure 3
870
810
30 30
600 35
Instlltion Instructions (Continued)
START
STOP/Clear
KitchenTimer/Clock
Microwave/Grill/
Combi.Conve.
Weight/TimeDefrost
88:88
MOUNTING UNDER COUNTER

esatto.house
11
20
590
870
35
550
810
30 30
Figure 4
INSTALLATION IN AN ELEVATED CABINET
• Cbin must mtch the dimensions provided in
Figure 5.
• The clernces with the dimensions indicted
in the gure must be provided t the rer prt
of cbin, upper nd lower sections so tht
necessry ventiltion cn be chieved.
Figure 5
19
Figure 2
810
30 30
870
600
35
840
545
565
896
595
Figure 3
810
30 30
35
START
STOP/Clear
KitchenTimer/Clock
Microwave/Grill/
Combi.Conve.
Weight/TimeDefrost
88:88
MOUNTING IN AN ELEVATED CABINET
590
870
550

User Manual
12
EO9060XL9M
1. Control pnel
2. Bking try
3. Wire shelf
4. Oven Door
5. Hndle
CONTROL PANEL
A. Function Knob
B. Timer Knob
C. Temperture Knob
ACCESSORIES
Your Estto Built-in Oven is supplied with:
• 1 × Bking Try
For cooking food such s rosts, ckes, pstries, frozen food etc,
or for collecting ft/spillge nd met juices.
• 1 × Wire Shelf
For rosting, grilling nd bking.
• 1 × Inner Try Wire Shelf
Prevents food such s stek from sticking to the Bking Try.
Your Built-in Oven
Note: The images in this user manual are for reference only. Your appliance may appear dierently.
F T
90
10
20
30
40
50
60
M
70
80
ºC
40
80
180
120
220
240
1 32
2
3
1
4
5

esatto.house
13
Model EO9060XL9M
Volume: 129L
Product Dimensions (W × D × H): 896 × 565 × 595mm
Weight (Net/Gross): 50.8kg / 52.5kg
Supply Voltge 220-240V AC 50/60 Hz
Rted Power 3.6kW
No. of Functions 9
Lmp Power 15 W
Thermostt 40-240 / Mx °C
Lower Heting Element 2000 W
Upper Heting Element 1500 W
Fn Forced 1 × 2200 W / 2 × 1250 W / 2 × 1800 W
Grill Heting Element 3250 W
• Technicl specictions cn be chnged without prior notice to improve product qulity.
• The vlues provided with the pplince or its ccompnying documents re lbortory redings in
ccordnce with the respective stndrds.
• These vlues my dier depending on the use nd mbient conditions.
• Figures in this guide re schemtic nd my not be exctly mtch your product.
Technicl Specictions

User Manual
14
Operting Instructions
OVEN FUNCTIONS
SYMBOL FUNCTION DESCRIPTION
Oven Light: Enbles the user to observe the progress of cooking without opening the door.
Bke (Conventionl): Idel for ckes, pizz cookies.
Stem Clening: Loosen dirt grese with stem before clening your oven.
Plese red the instructions on pge 15 before using this function.
Upper Het: Idel for heting pre-bked pstries nd smll mounts of food,
or if you wnt to grtinte your dish.
Grill: This cooking method is norml grilling, utilising the grill element only.
Grill Fn: Suitble for grilling lrge mount of met on lower rck within the oven.
Fn Bke: Evenly distributes het within the cvity for bking rosting on single try.
Fn Forced: Evenly distributes het within the cvity for cooking on multiple shelves.
Suitble for bking & rosting t tempertures lower thn the Bke (Conventionl) function.
Fn Assist: Circultes the ir within the oven cvity.
BEFORE FIRST USE
• Before using the oven for the rst time, red this mnul thoroughly, even if you re fmilir with this
type of pplince. Py prticulr ttention to the sfety instructions, instlltion instructions nd
operting instructions.
• Remove lbels or ccessories ttched inside the oven. If ny, tke out the protective lm on front side of
the pplince.
• Remove dust nd pckging residues by wiping inside of the oven with dmp cloth. Inside of oven must
be empty.
• After the pplince hs been properly instlled, nd before rst use, you should burn o ny dust,
oil or other remnnts tht my hve been left inside the cvity from the mnufcturing process or
trnsporttion. Plese run the new empty oven with the conventionl cooking function t 240º C
for t lest 45 minutes. If possible, open few nerby windows s smoke nd smell my occur
(which is norml). If the smell persists fter the cycle, repet the process once more.
• Wipe inside of the oven with slightly wrm wter with detergent fter it cooled followed by dry clen
cloth. Now you cn use your oven is redy for use.
• Prior to plcing food in your oven, we recommend preheting your oven for best results.

esatto.house
15
MANUAL COOKING MODE
In mnul cooking mode, the cooking durtion is controlled by the user
without timer.
1. Rotte the Timer Knob counter clockwise to the “ M ” position to engge Mnul Cooking
mode. This will stop the oven from utomticlly powering o while in the “ M ” position.
2. Then turn the Temperture Knob nd the Function Knob to your required settings.
3. Once you hve nished cooking, turn ll knobs bck to their originl “ ● ” o positions.
MINUTE MINDER MODE
Use the timer control knob to set the oven to power o fter your set number of minutes.
Follow these steps to operte the oven in timer mode:
1. Rotte the Timer Knob clockwise to set your desired number of minutes
(between 10 nd 90 minutes).
2. Then turn the Temperture Knob nd the Function Knob to your desired settings.
3. At the completion of the set durtion, n lrm will sound to indicte tht cooking is
complete nd the oven will utomticlly power o.
USING THE GRILL
• When you place the grill on the top rack, the food on the grill shall not touch the grill.
• You can preheat for 5 minutes while grilling. If necessary, you may turn the food upside down.
• Food shall be in the center of the grill to provide maximum air ow through the oven.
To turn on the grill:
1. Plce the function button over the grill symbol.
2. Then, set it to the desired grill temperture.
To turn o the grill:
1. Set the function button to the o position.
WARNING: Keep the oven door closed while grilling
RECOMMENDATIONS FOR ENERGY SAVING
Following detils will help you use your product ecologiclly nd economiclly.
• Use drk coloured nd enmel continers tht conduct the het better in the oven.
• As you cook your food, if the recipe or the user mnul indictes tht pre-heting is required,
pre-het the oven.
• Do not open the oven door frequently while cooking to mintin temperture.
• Try not to cook multiple dishes simultneously in the oven. You my cook t the sme time
by plcing two pots on the wire shelf.
• Cook multiple dishes successively. The oven will not lose het.
• Turn o the oven few minutes before the expirtion time of cooking. Do not open the door.
• Defrost the frozen food before cooking.

User Manual
16
PRIOR TO CLEANING YOUR OVEN
WARNING:
• Before ny mintennce nd clening, turn o the pplince nd disconnect the power.
• Set ll controls in the OFF position.
• Wit until the inside of the unit is not hot but only slightly wrm—clening is esier thn
when wrm.
• Clen the surfce of the unit with dmp cloth, soft brush or ne sponge nd then
wipe dry.
• In cse of hevy soiling, use hot wter with non-brsive clening product.
• For clening the oven door glss, do not use brsive cleners or shrp metl scrpers,
s these cn scrtch the surfce or led to the glss being dmged.
• Never leve cidic substnces (lemon juice, vinegr) on stinless steel prts.
• Do not use high pressure clener for clening the unit.
• The bking try nd wire shelving my be wshed in mild detergent.
USING THE STEAM CLEANING FUNCTION
This function will ssist with loosening dirt grese with stem before clening your oven.
• Remove ll the ccessories in the oven.
• Pour hlf litre of wter into the try nd Plce the try t the bottom of the cvity.
• Set the switch to the Stem Clening function.
• Set the thermostt to 70 °C degrees nd operte the oven for 30 minutes.
• After operting the oven for 30 minutes, open the oven door nd wipe the inner surfces
with wet cloth.
• Use dish-wshing liquid, wrm wter nd soft cloth for stubborn dirt, then dry o the
re you hve just clened with dry cloth.
Mintennce Clening

esatto.house
17
1. To remove the door, open the door fully towrds
yourself. Then perform the unlock opertion by
pulling the hinge lock upwrds with the id of
screwdriver s shown below.
2. Set the hinge lock to the widest ngle shown
below nd djust both hinges connecting oven
door to the oven to the sme position.
3. Close the opened oven door so tht it will be
in position to mke contct with hinge lock
shown below.
4. For esier removl of oven door, when it comes
close to closed position, hold the cover with two
hnds shown below. Lift up nd slowly pull the
door upwrds out from the oven.
REMOVING THE OVEN DOOR
The removble door llows for full ccess to the entire interior of the oven for esier nd
quicker mintennce. Follow these instructions crefully if you wish to remove the oven door.

User Manual
18
REMOVING THE INNER GLASS
5. Plce the glss door t on soft surfce (eg. crdbord or blnket) with door top cover
towrds yourself.
6. Lift by pressing on plstic ltches on left nd right side s shown below.
7. Then pulling the prole towrd yourself shown below.
8. The glss is relesed fter prole is removed. Remove the relesed glss by pulling towrd
yourself crefully. Outer glss is xed to oven door prole. You cn perform glss clening
esily fter glsses re relesed.
9. When clening is completed, reverse the bove procedures to return the door
to its originl position. Ensure tht prole is seted properly in plce.
WARNING:
• Do not forcefully pull out the door to prevent the glss from breking during the
dismntling process.
• The hinge springs could come loose nd cuse personl injury.
• Do not lift or crry the oven door by the door hndle.
30
Cleaning Oven Glass
Lift by pressing on plastic latches on left and right side as shown in gure
10 and pulling the profile toward yourself as in figure 11. Glass is
released after prole is removed as shown in gure 12. Remove the
released glass by pulling toward yourself carefully. Outer glass is xed to
oven door prole. You can perform glass cleaning easily after glasses are
released. You can mount glasses back by performing the operations
reversely after cleaning and maintenance are completed. Ensure that prole
is seated properly in place.
Catalytic Panel *
It is located behind the wire racks of the oven, at the right and left walls
of oven cavity. Catalytic panel removes offensive odour and provides using
your appliance at its best performance. Over time, oil and food odours
permeate into enamelled oven walls and heating elements. Catalytic panel
absorbs any food and oil odours, and burns them during cooking to clean
your oven.
Detaching catalytic panel
To remove catalytic panel; rst remove the wire racks. Once wire racks
are removed, catalytic panel will be free. It is advised to replace the
catalytic panel once every 2-3 years.
Figure 10 Figure 11 Figure 12
30
Cleaning Oven Glass
Lift by pressing on plastic latches on left and right side as shown in gure
10 and pulling the profile toward yourself as in figure 11. Glass is
released after prole is removed as shown in gure 12. Remove the
released glass by pulling toward yourself carefully. Outer glass is xed to
oven door prole. You can perform glass cleaning easily after glasses are
released. You can mount glasses back by performing the operations
reversely after cleaning and maintenance are completed. Ensure that prole
is seated properly in place.
Catalytic Panel *
It is located behind the wire racks of the oven, at the right and left walls
of oven cavity. Catalytic panel removes offensive odour and provides using
your appliance at its best performance. Over time, oil and food odours
permeate into enamelled oven walls and heating elements. Catalytic panel
absorbs any food and oil odours, and burns them during cooking to clean
your oven.
Detaching catalytic panel
To remove catalytic panel; rst remove the wire racks. Once wire racks
are removed, catalytic panel will be free. It is advised to replace the
catalytic panel once every 2-3 years.
Figure 10 Figure 11 Figure 12
30
Cleaning Oven Glass
Lift by pressing on plastic latches on left and right side as shown in gure
10 and pulling the profile toward yourself as in figure 11. Glass is
released after prole is removed as shown in gure 12. Remove the
released glass by pulling toward yourself carefully. Outer glass is xed to
oven door prole. You can perform glass cleaning easily after glasses are
released. You can mount glasses back by performing the operations
reversely after cleaning and maintenance are completed. Ensure that prole
is seated properly in place.
Catalytic Panel *
It is located behind the wire racks of the oven, at the right and left walls
of oven cavity. Catalytic panel removes offensive odour and provides using
your appliance at its best performance. Over time, oil and food odours
permeate into enamelled oven walls and heating elements. Catalytic panel
absorbs any food and oil odours, and burns them during cooking to clean
your oven.
Detaching catalytic panel
To remove catalytic panel; rst remove the wire racks. Once wire racks
are removed, catalytic panel will be free. It is advised to replace the
catalytic panel once every 2-3 years.
Figure 10 Figure 11 Figure 12
Mintennce Clening (Continued)

esatto.house
19
RACK POSITIONS
It is importnt to plce the wire grill into the oven
properly. Do not llow wire rck to touch rer wll
of the oven. Rck positions re shown in the next
gure. You my plce deep try or stndrd
try in the lower nd upper wire rcks.
Instlling nd removing wire rcks
• To remove wire rcks, press the clips shown with
rrows in the gure, rst remove the lower, nd
thn the upper side from instlltion loction.
• To instll wire rcks; reverse the procedure for
removing wire rck.
BULB REPLACEMENT
WARNING: To void electric shock, disconnect
power from the mins outlet or switch o the circuit
breker of the unit’s mins outlet.
For replcement, follow the below process:
1. First disconnect the power of pplince nd
ensure tht pplince is cooled.
2. Remove the glss protection by turning s
indicted in the gure below. If you hve
diculty in turning, then using gloves will help
you in turning.
3. Then remove the lmp by turning, instll the new
lmp with sme specictions.
4. Reinstll glss protection, plug the power cble
of pplince into electricl socket nd complete
replcement. Now you cn use your oven.
Type G9 Lmp
220-240 V, AC
15-25 W
Type E14 Lmp
220-240 V, AC
15 W
WARNING: This product contins light source
of energy eciency clss G.
31
Rack Positions
It is important to place the wire grill into
the oven properly. Do not allow wire rack to
touch rear wall of the oven. Rack positions
are shown in the next gure. You may place
a deep tray or a standard tray in the lower
and upper wire racks.
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the gure,
rst remove the lower, and than the upper side from installation location.
To install wire racks; reverse the procedure for removing wire rack.
Replacing Oven Lamp
WARNING: To avoid electric shock, ensure that the appliance circuit is
open before changing the lamp. (having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
Remove the glass protection by turning as indicated in the gure on the
left side. If you have difculty in turning, then using plastic gloves will
help you in turning.
Then remove the lamp by turning, install the new lamp with same
specications.
Reinstall glass protection, plug the power cable of appliance into electrical
socket and complete replacement. Now you can use your oven.
Type G9 Lamp Type E14 Lamp
WARNING: This product contains a light source of energy efciency class G.
Rack 4
Rack 3
Rack 2
Rack 1
220-240 V, AC
15-25 W
Figure 13
220-240 V, AC
15 W
Figure 14
Rck 1
Rck 2
Rck 3
Rck 4
31
Rack Positions
It is important to place the wire grill into
the oven properly. Do not allow wire rack to
touch rear wall of the oven. Rack positions
are shown in the next gure. You may place
a deep tray or a standard tray in the lower
and upper wire racks.
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the gure,
rst remove the lower, and than the upper side from installation location.
To install wire racks; reverse the procedure for removing wire rack.
Replacing Oven Lamp
WARNING: To avoid electric shock, ensure that the appliance circuit is
open before changing the lamp. (having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
Remove the glass protection by turning as indicated in the gure on the
left side. If you have difculty in turning, then using plastic gloves will
help you in turning.
Then remove the lamp by turning, install the new lamp with same
specications.
Reinstall glass protection, plug the power cable of appliance into electrical
socket and complete replacement. Now you can use your oven.
Type G9 Lamp Type E14 Lamp
WARNING: This product contains a light source of energy efciency class G.
Rack 4
Rack 3
Rack 2
Rack 1
220-240 V, AC
15-25 W
Figure 13
220-240 V, AC
15 W
Figure 14
31
Rack Positions
It is important to place the wire grill into
the oven properly. Do not allow wire rack to
touch rear wall of the oven. Rack positions
are shown in the next gure. You may place
a deep tray or a standard tray in the lower
and upper wire racks.
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the gure,
rst remove the lower, and than the upper side from installation location.
To install wire racks; reverse the procedure for removing wire rack.
Replacing Oven Lamp
WARNING: To avoid electric shock, ensure that the appliance circuit is
open before changing the lamp. (having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
Remove the glass protection by turning as indicated in the gure on the
left side. If you have difculty in turning, then using plastic gloves will
help you in turning.
Then remove the lamp by turning, install the new lamp with same
specications.
Reinstall glass protection, plug the power cable of appliance into electrical
socket and complete replacement. Now you can use your oven.
Type G9 Lamp Type E14 Lamp
WARNING: This product contains a light source of energy efciency class G.
Rack 4
Rack 3
Rack 2
Rack 1
220-240 V, AC
15-25 W
Figure 13
220-240 V, AC
15 W
Figure 14

User Manual
20
OPERATION IN CASE OF EMERGENCY
In the event of n emergency you should:
• Set ll controls in the OFF position nd disconnect the power.
• Cll After Sles Support on 1300 11 4357 or emil support@residentigroup.com.u
Some minor fults cn be fixed by referring to the instructions given in the tble below.
IMPORTANT: If your pplince ppers to be operting incorrectly, then you should disconnect it
from your electricl supply nd then contct After Sles Support.
WARNING: Do not ttempt to repir the oven yourself.
Plese note tht if n service gent is sked to ttend whilst the product is under wrrnty nd finds tht
the problem is not the result of n pplince fult, then you my be lible for the cost of the cll out chrge.
The pplince must be ccessible for the service gent to perform ny necessry repir.
If your pplince is instlled in such wy tht service gent is concerned tht dmge will be cused to
the pplince or your kitchen, then they will not complete repir.
Plese refer to the conditions of tht pper on the wrrnty section t the rer of this user mnul.
ISSUE POSSIBLE CAUSE COMMON RESOLUTIONS
The oven is not
turning on.
Brek in power supply. Check the household fuse box for ny blown fuses
nd replce s necessry. Also ensure tht
sfety switch hsn’t tripped.
The oven light is dim
or is not working.
The light globe is loose
or hs blown.
When the oven hs cooled nd is switched o,
remove the globe cover nd ensure tht the globe
is tightly secured. If blown, refer to the Clening
Mintennce section under Bulb Replcement.
A foreign object is
covering the globe.
When the oven hs cooled nd is switched o,
ensure tht the globe cover is clen.
The oven turns o during
opertion.
Too long continuous
opertion.
Let the oven cool down fter long cooking cycles.
Cooling fn not
operting.
Listen for sound coming from the cooling fn.
Oven not instlled in
loction with good
ventiltion.
Mke sure clernces specied in operting
instructions re mintined.
More thn one plugs in
wll socket.
Use only one plug for ech wll socket.
Outer surfce of the
oven gets very hot during
opertion.
Oven not instlled in
loction with good
ventiltion.
Mke sure clernces specied in operting
instructions re mintined.
Oven door is not opening
properly.
Food residues my be
jmmed between the
door nd internl cvity.
Clen the oven well nd try to re-open the door.
Troubleshooting
Other manuals for EO9060XL9M
1
Table of contents
Other Esatto Oven manuals
Popular Oven manuals by other brands

Kitchen HQ
Kitchen HQ 763206 manual

Smeg
Smeg SE990XKG Operating, maintenance and installation instructions

GE
GE Monogram ZET1 installation instructions

Vees
Vees MO-70MM08FEC Instructions for use - installation advice

Culina
Culina UBEMF619C user manual

VERDER
VERDER CARBOLITE GERO LGP 7/1000 + No Controller Installation, operation and maintenance instructions

NEFF
NEFF B57CS28 0 Series User manual and installation instructions

Premium
Premium PTO91R user manual

Bosch
Bosch HMG636B 1 Series User manual and installation instructions

GE
GE PTD7000 owner's manual

Siemens
Siemens CM836GN 6 Series User manual and installation instructions

The Fire Brick
The Fire Brick D130 Instruction booklet