Escalade American legend manhattan User manual

1-888-996-2729

FAX: 1-866-873-3531

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Your Model Number ____________________

have your model number when inquiring about parts.

[email protected]

Please

Date Code ___________________________

2 - AL2005W - - HL

When contacting Escalade Sports please provide your model number, date

code (if applicable) and part number if requesting a replacement part. These

numbers are located on the product, packaging, and this owners manual.

Purchase Date ________________________

PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

AL2005W/F

Make sure you understand the following tips before you begin to assemble your soccer table.

1. Start all bolts by hand before tightening.

2. Some drawings or images in this manual may not look exactly like your product. Please

read and understand the text before starting each assembly step.

TWO ADULTS ARE REQUIRED TO ASSEMBLE

THIS 56'' MANHATTAN FOOSBALL TABLE

Assembly Tips

Tools Required:

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND

SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO

ADULTS ARE NEEDED TO ASSEMBLE THIS SOCCER TABLE.

Allen Wrench (Included)

IMPORTANT! READ EACH STEP

IN THIS MANUAL BEFORE YOU

BEGIN THE ASSEMBLY.

Phillips Screwdriver

Furniture Polish and Cloth

ATTENTION:

IMPORTANT! READ EACH STEP

IN THIS MANUAL BEFORE YOU

BEGIN THE ASSEMBLY.

(26 pcs)

H1 - 4 mm x 25 mm

（28 pcs）

H4 - 8.5 mm x 22 mm

Flat Washer

(1 pc)

(26 pcs)

H3 - 8 mm x 50mm

Allen Head BoltPhillips Round Head Bolt

(12 pcs)

H8 - 8 mm Barrel Nut

T1 - Allen Wrench

HARDWARE IDENTIFIER

(To Scale)

H6 - 3.5 mm x 12 mm

Phillips Round Head Screw

(4 pcs)

H7 - 3.5 mm x 18 mm

(4 pcs)

H5 - 4 mm x 38 mm

Phillips Flat Head Screw

(8 pcs)

H2 - M4 Nylock Nut

(Not to Scale)

（28 pcs）

H9 - M8 Lock Washer

（28pcs）

PARTS IDENTIFIER

(Not to Scale)

P1 - Side Apron

(1 pc)

P3 -Playfield

(2 pcs)

P4 -Playfield Support Brace

(Not laminated)

(2 pcs)

P2A - End Apron

(1 pc)

P5 - Top Leg End Apron

(2 pcs)

P6 - Bottom Leg End Apron

(2 pcs)

P7 - Leg

(4 pcs)

P8 - Manual Scorer

(2 pcs)

P9 - Leg Leveler

(4 pcs)

(2 pcs)

P12 - 5-Hole Player Rod P13 - 2-Hole Player Rod

(2 pcs)

P14 - 3-Hole Player Rod

(4 pcs)

(8 pcs)

P10 - Player Rod Handle

(8 pcs)

P11 - Player Rod End Cap

P2B - End Apron with Logo Emblem

(1 pc)

680mm x 72mm

717mm x 130mm

717mm x 50mm

P15 - Blue Shirt Player

(13 pcs)

P16 - White Shirt Player

(13 pcs)

PARTS IDENTIFIER

(Not to Scale)

ACCESSORIES IDENTIFIER

(Not to Scale)

(2 pcs)

A1 - Soccer Ball

P17 - Player Rod Bumper

(16 pcs)

P19 - Ball Entry Cup

(2 pcs)

P18 - Player Rod

Plastic Washer

PARTS REQUIRED

1pc - P1 Side Apron

1pc - P2A End Apron

1pc - P2B End Apron with Logo Emblem

4pcs - H4 Flat Washer

4pcs - H3 Allen Head Bolt

4pcs - H9 M8 Lock Washer

P2B

P2A

STEP 1

Attach P1 Side Apron onto the P2A End Apron and P2B End Apron with Logo Emblem using the

H4 Flat Washers, H9 Lock Washers and H3 Allen Head Bolts as shown in FIGURE 1.

Do not tighten bolts, snug tighten only.

PARTS REQUIRED

1pc - P3 Playfield

1pc - STEP 1 Assembly

STEP 2

With the help of another adult, slide the P3

Playfield with the graphic facing down into

the grooves of both P2A End Apron, P2B End

Apron with Logo Emblem and the P1 Side

Apron as shown in FIGURE 2.

FIGURE 1

FIGURE 2

All grooves must be aligned

with each other.

Keep Parts Flush.

P2A

P2B

NOTE:

Make sure the P3 Playfield is properly

seated into all 3 grooves.

NOTE:

This assembly is upside down.

THIS STEP REQUIRES TWO OR MORE ADULTS.

IMPORTANT NOTE:

grphic facing down

PARTS REQUIRED

4pcs - P7 Leg

4pcs - P9 Leg Leveler

STEP 4

Attach the P7 Legs onto the P1 Side

Aprons using H3 Allen Head Bolts, H4

Flat washers and H9 Lock washers as

shown in FIGURE 4.

Thread P9 Leg levelers to leg as shown

in FIGURE 4.

Do not tighten H3 Bolts at this time.

PARTS REQUIRED 2pcs - P4 Support Brace

STEP 3

Attach the other P1 Side Apron to P2A End Apron and P2B End Apron with Logo Emblem using the

H4 Flat Washers, H9 Lock washers and H3 Allen Head Bolts as shown in FIGURE 3.

NOTE: Playfield Must Properly Fit In All 4 Apron Grooves for Correct Assembly.

FIGURE 4

4pcs - H4 Flat Washer

8pcs - H4 Flat Washer

8pcs - H3 Allen Head Bolt

8pcs - H5 Phillips Flat Head Screw

4pcs - H3 Allen Head Bolt

4pcs - H9 M8 Lock Washer

8pcs - H9 M8 Lock Washer

1pc - P1 Side Apron

P2B

P2A

FIGURE 3

Keep Parts Flush.

NOTE: These H5 Screws

do countersink into their

predrilled holes.

NOTE: These H5 Screws

do countersink into their

predrilled holes.

NOTE: Legs Attach to the outside of P1

Side Aprons.

Tighten, but do not strip out H5 Screws.

Attach the P4 Support Braces to the P1 Side Aprons using H5 Phillips Flat Head Screws.

Tighten H3 bolts using the T1 Allen Wrench.

FIGURE 5

PARTS REQUIRED

2pcs - P6 Bottom Leg End Panel

STEP 5

Carefully install H8 Barrel nuts into parts P5 & P6 Leg End Panel aprons as per diagram.

Attach end panels to the inside of the legs using H3 bolts , H4 flat washers , and H9 lock washers as

per diagram . Snug tighten this hardware using the T1 Allen wrench . Do not overtighten.

Tighten all Leg bolts now using the T1 Allen wrench – tight.

12pcs - H4 Flat Washer 12pcs - H3 Allen Head Bolt

12pcs - H9 M8 Lock Washer12pcs - H8 Barrel Nut

2pcs - P5 Top Leg End Panel

CAUTION: Two strong adults are recommended to flip

the table as shown.

1. Grab the table on the ground.

2. Turn the table over.

3. Place it on all four feet at the same time on the ground.

NOTE: The threaded hole in barrel nut must

align with the hole in the end of the leg end

panel for correct H3 bolt installation .

P11

P2B

FIGURE 6

STEP 6

Slide P12 5-Hole Rod, P13 2-Hole Rod, P14 3-Hole Rod through Rod Bushing of P1 Side

Apron, P17 Rod Bumper, P18 Rod Washer, P15 Blue Player or P16 White Player, P18 Rod

Washer, P17 Rod Bumper and P1 Side Apron as shown in FIGURE 6, Detail C.

Secure P15 Blue Player and P16 White Player onto rods using H1 Round Head Bolts and H2

M4 Nylock Nuts as shown in FIGURE 6, DETAIL B.

Attach the P19 Ball Entry Cup on P1 Side Aprons using pilot hole with H6 Phillips Round

Head Screw as shown in FIGURE 6, DETAIL A.

Attach the P8 Manual Scorers to P2A End Apron and P2B End Apron with Logo Emblem

using H7 Phillips Round Head Screws as shown in FIGURE 6.

Tighten, but do not strip out screws.

26pcs - H1 Round Head Bolt

26pcs - H2 M4 Nylock Nut

4pcs - H6 Phillips Round Head Screw

4pcs - H7 Phillips Round Head Screw

PARTS REQUIRED

8pcs - P10 Player Rod Handle

8pcs - P11 Rod End Cap

2pcs - P12 5-Hole Rod

2pcs - P13 2-Hole Rod

4pcs - P14 3-Hole Rod

2pcs - P8 Manual Scorer 13pcs - P15 Blue Shirt Player

13pcs - P16 White Shirt Player

16pcs - P17 Player Rod Bumper

16pcs - P18 Player Rod Plastic Washer

2pcs - P19 Ball Entry Cup

P11

P2A

P10

P14

P12

P13

= Blue Shirt / White Short Player

= White Shirt / Black Short Player

DETAIL A

P19

P15 P17

P18

P15

P18

P17

P13

DETAIL B

DETAIL C

Order of Players

(Overhead View)

NOTE: Correct placement

of Player Rod Handle.

NOTE: Install players onto Player Rods

exactly as per this diagram for correct

soccer play.

Congratulations! You have now assembled your soccer table. Please note the Care and Use

instructions below to insure many years of trouble free use of your soccer table.

CARE AND USE OF YOUR 56’’ MANHANTTAN FOOSBALL TABLE

1. Apply a few drops of lubricant (not provided) to the rods and the bushings.

Rotate rods to make sure you spread lubricant evenly.

2. Use spray furniture polish to clean all exterior surfaces of your soccer table and the playfield.

3. Use a carpenters level to properly level the table using the leg levelers.

4. This product is intended for INDOOR use only

.5. DO NOT sit, climb or lean on the table.

6. DO NOT drag the table when moving it. This will damage the legs.

7. DO NOT set drinks on the table.

Description Qty.

P2A

P10

P11

P12

P13

P14

P15

P16

P17

P18

P19

Key # Part #

PRODUCT PARTS LIST FOR MODEL #

AL2005HLH1

AL2005HLH2

AL2005HLH3

AL2005HLH4

AL2005HLH5

AL2005HLH6

AL2005HLH7

AL2005HLH8

AL2005HLH9

AL2005HLT1

AL2005HLP1

AL2005HLP2A

AL2005HLP3

AL2005HLP4

AL2005HLP5

AL2005HLP6

AL2005HLP7

AL2005HLP8

AL2005HLP9

AL2005HLP10

AL2005HLP11

AL2005HLP13

AL2005HLP14

AL2005HLP15

AL2005HLP16

AL2005HLP17

AL2005HLP18

AL2005HLP19

AL2005HLA1

AL2005HLK1

AL2005HLM1

4 mm x 25 mm Phillips Round Head Bolt

M4 Nylock Nut

8 mm x 50 mm Allen Head Bolt

8.5 mm x 22 mm Flat Washer

4 mm x 38 mm Phillips Flat Head Screw

3.5 mm x 12 mm Phillips Round Head Screw

3.5mm x 18mm Phillips Round Head Screw

8mm Barrel Nut

M8 Lock Washer

Allen Wrench

Side Apron

End Apron

Playfield

Playfield Support Brace

Top Leg End Apron

Bottom Leg End Apron

Leg

Manual Scorer

Leg Leveler

Player Rod Handle

Rod End Cap

2-Hole Player Rod

3-Hole Player Rod

Blue shirt Player

White shirt Player

Player Rod Bumper

Player Rod Plastic Washer

Ball Entry Cup

Soccer Ball

Hardware Kit

Owner’s Manual

P2B AL2005HLP2B End Apron with Logo Emblem 1

AL2005HLP12 5-Hole Player Rod 2

C1 AL2005HLC1 Bushing (Pre-installed) 8

AL2005W/F

This manual suits for next models

Table of contents

Other ESCALADE Video Gaming Accessories manuals

ESCALADE

ESCALADE Atomic User manual

ESCALADE

ESCALADE AMERICAN LEGEND AL4100 User manual

ESCALADE

ESCALADE American Legend Phazer HT600 User manual

ESCALADE

ESCALADE ESCORELCD User manual

ESCALADE

ESCALADE Atomic G05305W User manual

ESCALADE American Legend MANHATTAN User manual

Popular Video Gaming Accessories manuals by other brands