ESCALADE Atomic User manual

1-888-996-2729
FAX: [phone]
We strive to ensure that our products are of the highest quality
and free of manufacturing defects or missing parts. However,
you have any problems with your new product,
DO NOT RETURN IT TO THE STORE,
please contact us toll free @:
Or write to:
Escalade Sports
Customer Service Department
P.O. Box 889
Evansville IN 47706
Your Model Number G04801W/F
have your model number when inquiring about parts.
[email protected]
Please
Date Code 2 - G04801W/F - - HL
When contacting Escalade Sports please provide your model number, date
code (if applicable) and part number if requesting a replacement part. These
numbers are located on the product, packaging, and this owners manual.
Purchase Date
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
1

2
Make sure you understand the following tips before you begin to assemble your hockey table.
1. Start all bolts by hand before tightening.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS 90" INDIGLO AIR HOCKEY TABLE
Assembly Tips
Tools Required:
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO ASSEMBLE THIS HOCKEY TABLE
T1 - Allen Wrench (Included)
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.
Phillips Screwdriver
Furniture Polish and Cloth

3
H1 = 8 pcs H2 = 16 pcs
8.5 mm x 22 mm
8 mm x 35 mm
Allen Head Bolt
H5 = 16 pcs
M8 Lock Washer
Flat Washer
T1 = 1 pc
H3 = 8 pcs
8 mm x 40 mm
Allen Head Bolt
Allen Wrench
P1 = 1 pc P2 = 2 pcs P3 = 2 pcs
Left Leg
（with LED Light Feature） （with LED Light Feature）
Right Leg
Air Hockey Table Cabinet
Leg Leveler
P5 = 4 pcs
End Leg Panel
P4 = 2 pcs
HARDWARE IDENTIFIER
(To Scale)
(Not to Scale)
PARTS IDENTIFIER (Not to Scale)
3.5 mm x 18 mm
Phillips Round
Head Screw
H4 = 2 pcs
= 1 pc
Electronic Scorer
P6
Red Striker
A3 = 2 pcs
Red Puck
A4 = 2 pcs
A1 = 2 pcs
Blue LED Striker Blue LED Puck
A2 = 2 pcs
USB Cable
（Only used to charge
the A1 LED Strikers）
A5 = 1 pcs

4
P3
P3
P2
H1
H2
H5
P2
1 pc -
P1 Air Hockey Table Cabinet
P2 Left Leg2 pcs - P3 Right Leg2 pcs -
T1 Allen Wrench1 pc -
FIGURE 1
STEP:1
Leave Air Hockey Table Cabinet (P1) face down in the carton to assemble.
Install Left Legs (P2) and Right Legs (P3) onto Air Hockey Table Cabinet (P1) with Allen
Head Bolts (H1), Lock Washers (H5) and Flat Washers (H2) using Allen Wrench (T1) as
shown in FIGURE 1.
Do not tighten Bolts (H1) at this time.
PARTS REQUIRED:
H1 8 x 35mm Allen Head Bolt8 pcs -
H5 M8 Lock Washer 8 pcs -
H2 8.5 x 22mm Flat Washer8 pcs -
NOTE: Keep leg wires inside table.
Do Not trap or crush wires
NOTE: Keep leg wires inside table.
Do Not trap or crush wires

5
P5
P4
H3
H2
H5
H2
H5
FIGURE 2
STEP:2
Install End Leg Panels (P4) onto the Legs using Bolts (H3), Lock Washers (H5) and Flat
Washers (H2) as shown in FIGURE 2.
Tighten Bolts (H1) from STEP 1 and Bolts (H3) at this time.
Screw P5 Leg Levelers into the bottom of each leg as shown in FIGURE 2.
Connect 4 Leg Connecting Wires from (P2) and (P3) Legs to Junction Box Ports (C3) as per
the ELECTRICAL CONNECTIONS & SPARE PARTS DRAWINGS on the next page and below.
H5 M8 Lock Washer8 pcs -
PARTS REQUIRED:
H3 8 x 40mm Allen Head Bolt8 pcs -
P4 End Leg Panel2 pcs - P5 Leg Leveler4 pcs -
H2 8.5 x 22mm Flat Washer8 pcs -
P4
C3 Junction Box
P3 Leg P3 Leg
C2 A/C Adapter
Factory installed
P2 Leg P2 Leg
G04801
P6
C2
P3C5 C4
C6 C7
P2
P2 P3
NOTE: lightly push in on all connections to insure good connections.
All male to female connectors will only connect one way depending
on the tabs and slots of each.
Please closely inspect both the male and female connectors
to determine how to correctly plug the two together

6
ELECTRICAL CONNECTIONS & SPARE PARTS DRAWINGS
To Wall
Outlet
C1 - ON/OFF
Switch
-
C2-A/C Adapter
C3 - Junction Box
C7 Right IR Sensor
C6 Right LED Rail Light
C5 Left IR Sensor
P6 Electronic Scorer
P2 Left LED Leg
C4 Left LED Rail Light
C13 Air Blower
P2
Left LED Leg
NOTE: lightly push in on all connections
to insure good connections.
All male to female connectors will only
connect one way depending on the tabs
and slots of each.
Please closely inspect both the male and
female connectors to determine how to
correctly plug the two together
Designates
Customer must install this
plug into the Junction Box C3.
Customer must plug in :
P2, P3, P6
Pre pluged in :
C2, C4, C5, C6, C7
Please Do Not
allow to become
a trip hazard
G04801
P6
C2
P3C5 C4
C6 C7
P2
P2 P3
P3 Right LED Leg
P3 Right LED Leg
customer plug in
customer plug in
customer plug in
customer plug in
customer plug in
Factory
connected

7
FIGURE 3
STEP:3
Lift the table assembly from the floor with at least six strong adults, turn it over, and set
the table assembly on its legs in the location where you will play.
1 pc -
P6 Electronic Scorer
PARTS REQUIRED:
H4 3.5 x 18mm Phillips Round Head Screw2 pcs -
CAUTION: Six strong adults are recommended to flip
the table as shown.
1. Grab the table on the ground.
2. Turn the table over.
3. Place it on all four feet at the same time onto the ground.
P6
Junction Box ( C3)
tabs
Slots
P6
NOTE:Make sure the tabs on
the plug are turned correctly
for correct installation.
Be careful to match the
plug “Tabs” with the
correct “Slots”.
H4
Pilot Hole
First,feed the Electronic Scorer plug (P6) down through the hole on one side of the long top
rail as shown in FIGURE 3.
Next, connect the Electronic Scorer plug to the Junction Box (C3) as shown in DETAIL A.
Next, install Electronic Scorer (P6) onto long top rail using Philips Round Head Screws (H4)
and Pilot Holes as shown in FIGURE 3.
Tighten, but do not strip out Screws (H4).
DETAIL A

8
C4-A
C4-B
C4-B
C4-C
C4-B
C12
C12
C11
STEP TWO :
Unscrew Screw (C9) to remove Corner Caps (C10)
from the table top rail.
STEP THREE :
Unscrew Knob Bolts (C11) and remove Side Top Rail
from Air Hockey Table Cabinet . And carefully
unplug the LED Rail Light .
Replacement of LED Rail Lights
C10
C9 C11
STEP FOUR :
Unscrew Screws (C12), and separate LED Rail Lights from each other, by gently pulling apart.
Align the male and female connectors of the working LED Rail Lights , and install them back into
Side Top Rail using Screws (C12) as shown in the diagram.
Next, connect the plug of LED Rail Light A (C4-A).
Install back and screw Side Top Rail to the Air Hockey Table Cabinet using Knob Bolts (C11).
Lastly, Install Corner Caps (C10) back using Screw (C9).
Tighten, but do not strip out screws (C8) and (C9)
STEP ONE :
Should the LED lights not be working in the rail - Firstly , make sure the wall outlet cord is plugged in to a live A/C
outlet properly. Secondly , make sure the ON/Off Switch
(C1) is in the "ON" position . Thirdly , make sure the A/C
Adapter
(C2) is tightly plugged in to its outlet under the table . Lastly, make sure all (C4) & (C6) connections are
snuggly plugged into the Junction Box
(C3) . At this point , should the LED Rail Lights still not be working ,
please disconnect the A/C power to the table before proceeding .
A call will be required to our Customer Service Department
to acquire the necessary replacement part(s) .

9
STEP TWO :
Unplug the connecting wires of Electronic Scorer (P6)
from the Junction Box (C3) .
Unscrew the Screw (H4) and remove the Electronic
Scorer (P6) from the Top Rail.
STEP ONE :
Should the LED lights not be working in a Leg (s) - Firstly , make sure the wall outlet cord is plugged in to a live A/C
outlet properly. Secondly , make sure the ON/Off Switch
(C1) is in the "ON" position . Thirdly , make sure the A/C
Adapter
(C2) is tightly plugged in to its outlet under the table . Lastly, make sure all (P2) & (P3) connections are
snuggly plugged into the Junction Box
(C3) . At this point , should the LED leg(s) lights still not be working ,
please disconnect the A/C power to the table before proceeding .
A call will be required to our Customer Service Department
to acquire the necessary replacement part(s) .
STEP THREE :
Need six strong ADULTS to turn the table over and place the
table onto soft carpet or a non- abrasive surface.
Gently disconnect the wire and remove the leg from the table
cabinet using a M5 / 5mm Allen Wrench.
Unscrew and remove the Leg Leveler (P5).
STEP FOUR :
Unscrew the screw of the Blue Light Cover Lens (C12) and
slide out the Lens (C12) from the Leg slot.
STEP FIVE :
Unscrew the screws of the LED Leg Light (C13) and gently
pull apart the LED Leg Light from the connection plug.
STEP SIX :
Install the replacement LED leg light and carefully
reattach the Blue Light Cover Lens (C12).
STEP SEVEN :
Reinstall the leg leveler (P5). Turn the table back over and
reattach the electronic scorer onto the top rail as per Page 7 Step 3.
Replacement of LED Leg Lights
C13
C12
HOCKEY GAME RULES:
1. This game is designed to be played with two (2) players, one at each end, or with four (4) players,
two at each end of the game table.
2. Flip a coin to determine who will begin play, or a face-off can be held at the center of the table.
3. Play begins when the puck is placed on the playing surface. Players must hit the puck with the
strikers and attempt to shoot into the opponent’s goal.
4. One point is awarded when a puck is shot into the opponent’s goal.
5. Winning the game: the winning score is accomplished by being the first player to reach a
predetermined score or by being the player to score the most points within a given period of time.
ELECTRONIC SCORER OPERATION:
POWER ON/OFF = Press POWER ON/OFF button to start or turn off the scoring unit.
START/PAUSE = Press START/PAUSE button to START the game. Press START/PAUSE button
during game will PAUSE or RESUME the game.
= Press SELECT/RESET button to select time options 5, 10, 15 minutes or No Time
Limit. Long press SELECT/RESET button to reset back to the game option.
LIGHT ON/OFF
SELECT/RESET
= Press LIGHT ON/OFF button to turn on or turn off the Top Rail Light and Leg Light.
SOUND ON/OFF = Press Sound ON/OFF button to turn on or turn off the Sound.
Plug

10
LED PUCK BATTERY CHANGE INSTRUCTION
STEP ONE:
Remove screws and back
cap from LED Puck using Small
Phillips Screwdriver (not provided).
STEP TWO:
Remove CR2016 Lithium
The purchase of a new CR2016 lithium 3V Battery is required
Battery 3V from LED Puck.
STEP THREE:
Insert new CR2016 Lithium Battery 3V
into LED Puck.
STEP FOUR:
Install back cap and secure screws with Phillps Screwdriver
(not provided).
Positive “+”
on bottom
side
LED STRIKER BATTERY CHARGE INSTRUCTION
NOTE:
Make sure the on/off
switch on the back
cap properly aligns
and fits into its slot in
the LED puck during
reassembly
IF BATTERY HOLDER BRACKET
MOVES, RE-INSTALL IT TO LED
PUCK AS SHOWN IN DIAGRAM.
USB Port
LED INDICATOR WILL LIGHT-UP DURING CHARGING AND
WILL TURN OFF WHEN ITS FULLY CHARGED.
Helpful Hint:
The LED puck battery will last approximately 7 hours of continuous play. The puck battery is not
rechargeable. Be sure to turn the switch to the “OFF” position when not in use to conserve your
battery life.
Helpful Hint:
The LED strikers each will require about 4 hours to fully charge up and will last approximately
7 hours of continuous play time. Be sure to turn the switch to the “OFF” position when not in use.

11
PRODUCT PARTS LIST
G04801HLH1 8 x 35 mm Allen Head Bolt 8
G04801HLH3 8 x 40 mm Allen Head Bolt 8
G04801HLH4
3.5 x 18 mm Phillips Round Head Screw 2
G04801HLH5
M8 Lock Washer 16
G04801HLT1 Allen Wrench 1
G04801HLH2 8 x 22 mm Flat Washer 16
G04801HLP2 Left Leg 2
G04801HLP3 Right Leg 2
G04801HLP4 End Leg Panel 2
G04801HLP5 Leg Leveler
Electronic Scorer
4
G04801HLP6
1
G04801HLA1 Blue LED Striker 2
G04801HLA2 Blue LED Puck 2
G04801HLA3 Red Striker 2
G04801HLA4 Red Puck 2
G04801HLA5 USB Cable 1
G04801HLK1 Hardware Kit 1
G04801HLM1 Instruction Manual 1
G04801HLC4 Left LED Rail Light 1
G04801HLC1 ON/OFF Switch 1
G04801HLC2 A/C Adapter 1
G04801HLC3 Junction Box 1
G04801HLC5 Left IR Sensor 1
G04801HLC6 Right LED Rail Light 1
G04801HLC7 Right IR Sensor 1
G04801HLC8 Plastic Goal Box 2
G04801HLC9 Screw of Corner Cap 4
G04801HLC10 Corner Cap 4
G04801HLC11 Top Rail Knob Bolt 12
G04801HLC12 Blue Light Cover Lens 4
G04801HLC13 LED Leg Light 4
G04801HLP1 Air Hockey Table Cabinet 1
Part# Part#
Description Description (Factory Installed) QtyQty
MODEL: G04801
CARE AND USE OF YOUR HOCKEY TABLE
.2
rofdednetnisitcudorpsihT ROODNI .ylnoesu
.5 DO NOT
DO NOT
DO NOT
It is suggested that this table be placed close to wall thus allowing the air motor
cord to
Use a carpenters level to properly level table using the leg levelers.
NOT be a trip hazard. Always turn air motor off when table is not in use.
.6
.elbatehtnonaelrobmilc,tis
.7
8.
9.
This will damage the legs..tignivomnehwelbatehtgard
.elbatehtnosknirdtes
For long life and best play from your air hockey table, apply spray furniture polish
to a clean cloth and wipe down the playfield with air motor running to make the
best play and frequently thereafter.
3.
4. DO NOT operate the motor if the cord is damaged in any way.
.1
Use only a suitable 120v AC household outlet, and insure the cord is not a trip hazard.
If possible, cover table with a pool table cover or sheet when not used to
keep playfield clean preventing any dust build up.
10.
Congratulations! You have now assembled your Hockey Table. Please note the Care and Use
instructions below to ensure many years of trouble free use of your Hockey Table.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation."
"CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment."

12
y ESCALADEnafoesahcrupehtno,renwolanigiroehtotsdnetxeytnarrawremotsucsihT
.)"tcudorP"ehtsaderreferretfaniereh(tcudorPSTROPS
:NOITARUDYTNARRAW 09fodoireparof,renwolanigiroehtotdetnarrawsitcudorPsihT
.esahcruplanigiroehtmorfsyad
:EGAREVOCYTNARRAW tcudorpsiht,renwolanigiroehtotstnarrawSTROPSEDALACSE
esoprupdednetniehtrofdesunehwpihsnamkrowdnalairetamnistcefedmorfeerfebot
NEEBSAHTCUDORPEHTFIDIOVSIYTNARRAWSIHT.snoiti
dnocdnaesulamronrednu
,ECIVRESREPORPMI,ECNEGILGEN,ESUELBANOSAERNU,TNEDICCAYBDEGAMAD
REHTOROTCUDORPEHTHTIWDEDIVORPSNOITCURTSNIWOLLOFOTERULIAF
.PIHSNAMKROWDNALAIRETAMNISTCEFEDFOTUOGNISIRATONSESUAC
:TNEMECALPERYTNARRAW ,doirepytnarrawyad09evobaehtgniruD
elbarapmocahtiwecalperrostnenopmoctnemecalperedivorpllahsSTROPSEDALACSE
esaelp,eracreporpdnaesulamronrednuevitcefedsitcudorpfI.gnisoohcruotatcudorp
.tpeDeciv
reSremotsuCruotcatnoc
.tpeDecivreSremotsuC/888-996-2729-1
:tasuetirWrO
60774NI,ellivsnavE,988xoB.O.P-.cnI,stropS®edalacsE
.tpeDecivreSremotsuC:nttA
:tasuliam-ErO
moc.stropsedalacse@gameroom
Other than shipping requirements, no charge will be made for such replacement of in-warranty
products.
:SREMIALCSIDYTNARRAW TUOGNISIRASEITNARRAWDEILPMIYNA
SEITNARRAWDEILPMIEHTOTDETIMILTONTUBGNIDULCNI,ELASSIHTFO
ERA,ESOPRUPRALUCITRAPAROFSSENTIFDNAYTILIBATNAHCREMFO
TROPSEDALACSE.DOIREPYAD09EVOBAEHTOTNOITARUDNIDETIMIL S
REHTOROTCUDORPEHTFOESU
FOSSOLROFELBAILEBTONLLAHS
SEGAMADROSESNEPXE,STSOCLATNEDICNIROLAITNEUQESNOC
.ESUREHTOYNAFOREMUSNOCEHTYBDERRUCNI
rolaitneuqesnocroseitnarrawdeilpmifonoitatimilronoisulcxeehtwollatonodsetatsemoS
.uoyotylppatonyamsnoisulcxerosnoitatimilevobaehtos,segamadlatnedicni
:SEIDEMERLAGEL evahoslayamuoydnasthgirlagelcificepsuoysevigytnarrawsihT
.etatsotetatsmorfyravyamhcihwsthgirrehto
YTNARRAWDETIMILYAD09