ESP Fort ECSPCAM User manual

Elite Security Products
Redditch B98 8YN
Preparation For Use
Ensure that the smart phone is connected to the same Wi-Fi
network that you would like to attach the device.
Ensure that you have a mobile device running iOS 8 or higher
or Android 4.1x or higher and a 2.4GHzWi-Fi connection.
Contents
• Indoor Camera
• Mounting Pack
• Micro USB Power Cable
• USB Power Adapter
• User Manual
General
Our products are designed to comply with the
recommended codes of practice for lighting and to be
installed and serviced by competent persons in
accordance with the relevant regulations.
Download the ClickSmart+ App on your
mobile device from the App Store or
Google Play.
Sign in or Register following the
instructions on the ClickSmart+ App.
Smart Indoor Camera
ECSPCAM
Products bearing this mark
are compatible with the Clicksmart+ APP
MicroSD Card
Reset Button
Speaker
Microphone
Installation
Connect the supplied power adapter to the camera and apply power, the camera will operate after 30secs.
Front View

Telephone : [phone]
Fax: [phone]
Email : [email protected]
Web : www.espuk.com
E&OE - Errors and omissions excepted.G21
Guidance
APP Pairing
1. Power up the device VIA the 5V Micro USB Cable
2. After 30 Seconds, a double chime will be heard
every 30 seconds.
The ClickSmart+ app will guide you through:
Entering the Wi-Fi Network and Password.
Using the Camera to scan a QR code.
Connecting the Device.
Resetting the Device
If the camera needs to be reset, connected to a new Wi-Fi network, or if it needs to be paired with a new master
account, remove the device from the app, prior to resetting the device.
1. Using the reset key, long press the reset button until
3 chimes are heard.
2. The device should now be reset, after 30 seconds,
there should be a double chime heard.
>Unit requires a minimum of 2 Mbps (upload/download)
>This unit only operates on 2.4GHz
>If the signal strength of your Wi-Fi router is weak: Change
router/camera relative position to receive better signal, Use Wi-Fi
repeater/extender to maximize the range of your Wi-Fi router.
>If the device is installed on a new network the unit will require
resetting
>If the camera needs to be added to a new account, unbind the
device from the first account prior to resetting the device.
Elite Security Products
Redditch B98 8YN
For more product information please visit the ESP website
9:41 AM 100% 9:41 AM 100% 9:41 AM 100%
Home Smart Me
ClickSmart+
Hub
Window &
Door Sensor
Humidity &
Temperature...
PIR Internal Camera 2G Switch
Module
2G Dimming
Module
Smart Double
Socket
Smart Single
Socket
Add Manually Auto Scan Cancel Net Pairing Mode
Reset the device first.
①Set up the device as per the
installation instructions
②Connect the device to the power
with the cable provided
③After 30 seconds a double chime will be
heard ever 30 seconds.
Confirm Unit is bleeping
9:41 AM 100% 9:41 AM 100% 9:41 AM 100%
Home Smart Me
Internal Camera
Smart Camera Settings
Screenshot Speak Record
Playback Alarm Photo album
Device Name Smart Camera
Low
Share Device
Device Infromation
Use Echo
FAQ & Feedback
Firmware Infromation
Basic Function Settings
Motion Detection
Remove Device