Essentia FlexDrive User manual

How to Reset to Factory Settings
Unplug bed. Press both buttons on the remote control for 30 seconds.
30 sec
Step 1
Plug in.
Step 2
Insert batteries into
remote control.
Step 3
Enjoy.
Single Bed Setup
FlexDrive - Setup
Didn’t Work?
Should it not work correctly, remove batteries from the remote control and unplug bed
for 10 seconds. Repeat steps 1-3 described above.

Step 1
Plug in rst bed only.
Step 2
Insert batteries into rst
remote control.
Step 3
Press control buttons to
ensure functionality.
Step 4
Plug in second bed.
Step 5
Insert batteries into
second remote control.
Step 6
Press control buttons to
ensure functionality.
2 x Single Bed / King Setup
How to Reset to
Factory Settings
Unplug bed. Press
both buttons on the
remote control for 30
seconds.
30 sec
Didn’t Work?
Should it not work
correctly, remove
batteries from the
remote control and
unplug bed for 10
seconds.
Repeat steps 1-6.
FlexDrive - Setup