Essex Electronics KE-1701-RK Assembly instructions

Electronics
1-800-KEYLESS keyless.com
KE-1701-RK Installer Guide
The Worry-Free Keyless Entry® System
Code Type
Master User Code
1 Changeable Code,
3-8 Digits Long
Factory Default: 1 3 5 7 9
Optional User Codes
5 Changeable Codes,
3-8 Digits Long
Lock Code
3 Non Changeable Codes
Lock Code 659
Lock Code 557
Lock Code 555
KE-1701-RK Code Types
User Type
Vehicle Owner, Operator, or
Manager
Family Member, Friend,
Mechanic, Valet, Authorized
Vehicle Operator
Everyone
Function
- Vehicle Entry & Auxiliary Output
Control
- Add, Change, Delete Optional
User Codes
- Vehicle Entry & Auxiliary Output
Control
- 559 -Locks Door, Arms Cable,
Arms Keypad, Cancels 3-Digit
Convenience Code Mode
- 557 - Locks Door, Arms Cable,
Cancels 3-Digit Convenience
Code Mode
- 555 - Locks Door, Activates 3-
Digit Convenience Code (if
enabled)
KE-1701-RK Code Programming Commands
Code Type Commands
Master User Code To Change The Master User Code ' ~~
I 1 • Locate and press the Programming Switch
Where is the Programming 2. 4 Rapid Beeps will sound
Switch Installed? 3. Enter 1119 on the keypad
~ 4. 3 Rapid Beeps ^ will sound
What is my Master User Code? 5- the new 3-8 Digit Master User Code within 5 seconds
6. Wait 5 seconds for 3 Rapid Beeps XJs
7. Test the new Master User Code
8. If the new code does not work, repeat Steps 1. - 7.
Make sure you have door keys or leave a window open before testing the new Master User Code!
Code Type & Memory Location I Commands
Optional User Code 111 To Add or Change an Optional User Code
Optional User Code 113 1. Enter the Master User Code on the keypad
m Optional User Code Memory Location Number
pt ona User Code 117 3. 3 Rapid Beeps will sound (command accept)
Optional User Code 119 4. Enter the new 3-8 Digit Optional Use Code
5. 3 Rapid Beeps will sound (command accept)
6. Wait 5 seconds for 3 Rapid Beeps )) (system reset)
7. Test the new Optional User Code
8. If the new code does not work, repeat Steps 1.-7.
?;rT m 9. Repeat Steps 1. - 7. to add additional Optional Users
Optional User Code 111 To Delete an Optional User Code ^
Optional User Code 113 1. Enter the Master User Code on the keypad
nnlinna III Option®' Usef Code Memory Location #
oSnn! nf!r Al ® seconds for 3 Rapid Beeps (system reset)
Optional User Code 119 4. Test the deleted Optional User Code
— — 5. If the deleted code still works, repeat Steps 1.-4.
-an Start Code with #5 Note; One Long Beep indicates an error - allow the system to reset - 2
— i^3p'd Beeps - then proceed to re-enter the required commands
KE-1701-RK REV B-7-20-11
*Removal of the manufacturer's date code label wiU void the warranty! The 1700
IuAVa ^ ^ ^year limbed warranty against defects in materials and workmanship. Essex Electronics disclaims
any and all damages or iniunes that may result fr om the installation or use of this product.
Copyright © 2000 Essex Electronics, Inc. All Rights Reserved - 1130 Mark Avenue, Carpinteria, California 93013 - USA
Voice 805.6_84.7601 - Fax [phone] - Email info@kevless rom
Specifications Subject to Change Without Notice - Patent Pending
Optional User Code 111
Optional User Code 113
Optional User Code 115
Optional User Code 117
Optional User Code 119
Can't Start Code with #5

Electronics
1-80Q-KEYLESS keyless.com
KE-1701-RK System Setui
I Commands
KE-1701-RK Installer Guide
The Worry-Free Keyless Enhy® System
Setup
Change 3/4 Key Function
jrammlng Commands
Setu
Convenience Codes
Change Auxillarv Output 3/4 to Toggle ON/OFF
1. Locate and Press the Programming Switch
2. 4 Rapid Beeps ^ will sound (command accept)
3. Enter 1113 on the keypad
4. 2 Rapid Beeps ^ will sound (system reset)
5. Enter 1 to enable 3/4 Key Output to Toggle ON/OFF
6. 4 Rapid Beeps Indicates successful mode change
Note: 1 long beep indicates error - press 1 again
7. Test: by entering a valid unlock code followed by pressing the
3/4 Key within 5 seconds of the last key press.
Change Auxillarv Cutout 3/4 to Momentarv
8. Repeat Steps 1.-5.
9. Enter 9 to enable momentary mode (1 second) (default)
10. Feedback: 4 beeps indicates successful mode change
Note: 1 long beep indicates error - press 1 again
11. Test: by entering a valid unlock code followed by pressing the
3/4 Key within 5 seconds of the last key press.
Note: When either programming command is successfully completed
the system will automatically restart to accept and activate the new
system setup parameters. On restart the toggle auxiliary Output 3/4
(press the 3/4 Key) will be in the resting, inactive, or OFF state and the
alarm output will be ON or armed.
Commands
Enable 3-Digit Convenience Codes
1. Locate and Press the Programming Switch
2. 4 Rapid Beeps ^ will sound
3. Enter 1115 on the keypad
4. 2 Rapid Beeps ^ will sound
5. Enter 1 to Enable Convenience Code Mode
6. 4 Rapid Beeps indicates successful mode change
Note: 1 long beep indicates error - press 1 again
7. Add an Optional User Test Code of more than 3 digits long -
example: 97531
8. Test: by entering lock code 555 followed by entering the test
code. 975 should unlock the door. If not, repeat the
programming steps.
9. Delete the Optional User Test Code.
Disable 3-Dioit Convenience Codes
10. Repeat Steps 1.-4.
11. Enter 9 to Disable Convenience Code Mode
12. 4 Rapid Beeps indicates successful mode change
Note: 1 long beep indicates error - press 9 again
13. Test: Enter Lock Code 555 followed by a valid User Code
longer than 3-Digits. The full length code should be required
to unlock the vehicle. If not, repeat the proqramminq steps.
Note: One Long Beep indicates an error - allow the system to reset - 2
Rapid Beeps - then proceed to re-enter the required commands
KE-1701-RK REV B - 7-20-11
Copyright © 2000 Essex Electronics, Inc. All Rights Reserved - 1130 Mark Avenue. Carpinteria, California, 93013 - USA
Voice 805.684.7601 — Fax [phone] - Email info@l<evless.cQ[Ti
Specifications Subject to Change Without Notice - Patent Pending