Haworth Jive User manual

Jive Table with Swivel Base
For assembly assistance, visit Haworth.com, or call: 1 800 426 8562, or email suppor[email protected]
Jive
Assembly Instructions
Congratulations on
your purchase of a
new Jive table!
Ready to create a dedicated workspace just for you?
We know you want to get up and running as soon as possible, but
before you dive right into setting up your table, be sure to:
1. Grab a friend to help you with the lifting. They can also help you
hold parts in place during assembly to make things a little easier.
2. Make sure you have all your parts and hardware, and gather the
necessary tools and safety equipment.
3. Follow all the steps carefully before using your table.
That’s it! Once you’ve got your table assembled, you’ll be ready to
get down to business with a fresh, new space that’s dedicated to
helping you stay productive.

13mm
B
S-66
Tools Required
Scale 1 : 1
0 11/2
1/4 1/4
Jive Table with Swivel Base Assembly Instructions
E.C.O. No 245-691 Part No 6100-0170 Rev 1 Page 2 of 6
Customer Service: 1 800 426 8562
(S-66) #12 x 1” Pan Head Screw
Assembly Overview 30D x 60W
30D x 72W
24D x 60W
#2
C
D
#2
A

(A) Worksurface
(B) Swivel Base Legs - Magnet
(S-66) Pan Head Screws - Qty. 24
(D) Casters
(C) Swivel Base Legs - Swing Arm
E.C.O. No 245-691 Part No 6100-0170 Rev 1 Page 3 of 6
Customer Service: 1 800 426 8562

E.C.O. No 245-691 Part No 6100-0170 Rev 1 Page 4 of 6
Customer Service: 1 800 426 8562
C
(S-66) #12 x 1” Pan Head Screw
Magnetic and Swing Arm locations (topside view)
24 Qty.
1
S-66
A
Attach swivel base legs (B and C) to worksurface (A) as shown
C B
B C
B
NOTE: Swivel base swing arm legs (C)
must be installed on opposite corners
of the table.

E.C.O. No 245-691 Part No 6100-0170 Rev 1 Page 5 of 6
Customer Service: 1 800 426 8562
2Insert casters (D) and tighten with wrench as shown
13mm
Wrench
With a helper, flip table onto its feet
3
FLIP TABLE
ONTO FEET
D
C
B

E.C.O. No 245-691 Part No 6100-0170 Rev 1 Page 6 of 6
Customer Service: 1 800 426 8562
4Align tables so base legs with magnets (B) and base legs with swing arms (C) are adjacent to one another
C
B
C
B
Pivot each swing arm (on C) to attach to the adjacent magnet (on B)
TABLE CONNECTION AND ALIGNMENT
5
C
B