Etatron AG SELECT Series User manual

AG SELECT CONTROLLERS
ALARM MENU

EXPERT MODE - MENU ALARM
From main screen press the
button and keep pressing the
until “MENU ALARM” is shown
Press the button to enter the
menu

EXPERT MODE - MENU ALARM
Three types of alarm can be set:
MAX –The controller raises an
alarm above a given
measurement value.
MIN –The controller raises an
alarm below a given
measurement value.
OVER –The controller can
raise an overdosing alarm
when the measurement value
does not come back to the
Setpoint value within the
established time interval.
Change the settings using the
Minus / Plus buttons
00:05 = 5 minutes

EXPERT MODE - MENU ALARM
Raised alarms are shown on the
left upper side of the display with
their related parameter.
To clear the alarm press the ESC
Button x 1. If the issue has not
been correct properly the alarm
will be displayed a second time
When the overdose alarm is
displayed the instrument will turn
off the pumps