ETC Taron User manual

Large Wooden Table

A
C
B
A=Round wooden surface ,1pc
B=Steel table leg,1pc
C=Steel table leg,1pc

1
M6*12
2
M6*16
3
4
M6*12mm Screw=4pcs M6*16mm Screw=1pc
Plastic cover=4pcs
Iron lid=1pc
Hardware Accessories

BC
Step 1: Turn the table surface upside down, align "B" and "C" table legs on
the back of the surface as per the position of the holes.
Step 2: Insert Screw"1"into the surface through the round hole and tighten
the screw,repeat the action until all 4 screws are tightened.
Step 3: Insert Screw"2"through the hole in the middle of the
junction,tighten the screw and ensure the iron lid could be fixed.
Step 4: Attach the "Plastic covers" at both ends of the legs.
A

Medium Wooden Table

A
BC
A=Round wooden disc,1pc
B=Steel table leg,1pc
C=Steel table leg,1pc

1
M6*12
2
M6*16
3
4
Hardware Accessories
M6*12mm Screw=4pcs M6*16mm Screw=1pc
Plastic cover=4pcs
Iron lid=1pc

B
C
A
Step 1: Turn the table surface upside down, align "B" and "C" table legs on the back of the
surface as per the position of the holes.
Step 2: Insert Screw"1"into the surface through the round hole and tighten the screw,repeat
the action until all 4 screws are tightened.
Step 3: Insert Screw"2"through the hole in the middle of the junction,tighten the screw and
ensure the iron lid could be fixed.
Step 4: Attach the "Plastic covers" at both ends of the legs.

Small Wooden Table

A=Round wooden disc,1pc
B=Steel table leg,1pc
C=Steel table leg,1pc
A
B
C

1
M6*12
2
M6*16
3
4
Hardware Accessories
M6*12mm Screw=4pcs M6*16mm Screw=1pc
Plastic cover=4pcs
Iron lid=1pc

C
B
A
Step 1: Turn the table surface upside down, align "B" and "C" table legs on the back of the
surface as per the position of the holes.
Step 2: Insert Screw"1"into the surface through the round hole and tighten the screw,repeat
the action until all 4 screws are tightened.
Step 3: Insert Screw"2"through the hole in the middle of the junction,tighten the screw and
ensure the iron lid could be fixed.
Step 4: Attach the "Plastic covers" at both ends of the legs.