ETEKCITY EAM-ET1 User manual

1
Questions or Concerns? [e-mail] • [phone]
Air Mattress
Model: EAM-ET1 & EAM-EQ1

2
Thank you for purchasing the EAM-ET1/EAM-EQ1
Air Mattress by Etekcity.
If you have any questions or concerns, please
reach out to our helpful Customer Support Team
at [email protected]. We hope you enjoy your
new air mattress!

3
1 x Air Mattress
1 x Mattress Storage Bag
2 x Vinyl Plastic Repair Kits
1 x User Manual
1 x Information Card
1 x Warranty Card
1 x Air Pump
1 x AC Charger
1 x DC Charger
1 x Air Pump Carry Bag
Package Contents
Specifications
Safety Information
Function Diagram
Initial Setup
Operation
• Inflating
• Deflating and Storing
Care and Maintenance
• Cleaning
• Keeping the Mattress Firm
• Preventing Leaks
• Repairing Leaks
Troubleshooting
Warranty Information
Customer Support
3
4
5
8
9
9
9
10
12
12
12
13
13
14
15
16
Table of Contents Package Contents

4
Specications
Model EAM-ET1 EAM-EQ1
Dimensions Twin
75 x 39 x 9 in / 91 x 99.1 x 22.9 cm
Queen
80 x 60 x 9 in / 203 x 152 x 22.9 cm
Max Weight Capacity 450 lb / 204.1 kg 650 lb / 294.8 kg
Note: The included air pump is rated at 0.55 psi / 3.8 kPa. You can also use another airbed pump
rated at 0.4–0.55 psi / 2.7–3.8 kPa.

5
Safety Information
To reduce the risk of personal injury, please read and follow all instructions and safety guidelines in this
manual.
Risk of suffocation:
Never allow an infant 15 months or younger to sleep on an inatable mattress. Infants can
suffocate on an under-inflated or deflated mattress, on bedding, or by being trapped between
the mattress and another surface.
!
WARNING
• Children over 15 months old may sleep on this inflatable mattress only if there is at least a
shoulder-width space between the mattress and any vertical surface (such as walls or furniture) to
avoid entrapment.
• Always keep the mattress fully inflated when using.

6
Risk of burns, re, and other injury:
Keep mattress and cord away from heat sources or heated surfaces. Do not smoke on the
mattress.
Do not stand, walk, or jump on this mattress.
This mattress is not a life-saving device. It is not a flotation device and is not intended for use in
water.
Do not expose to sun, rain, or other complex climates for a long period of time. Do not expose
to harsh outdoor conditions. Do not use in wet or damp areas. When camping, use without
shelter only for a brief period of time. Use in sheltered conditions such as inside a tent or
vehicle.
!
WARNING
• Close supervision is necessary when this mattress is used by or near children, invalids, or disabled
persons.
• Only use this mattress as described in this manual. Do not use attachments not recommended by
Etekcity.
• Do not use this mattress if it is damaged or not working properly. Contact Customer Support (see
page 17).
• Keep away from flammable materials (such as curtains) while inflating.
• Keep air valves free of lint, hair, and other small objects.
• Do not insert any foreign object into any opening.

7
SAVE THESE INSTRUCTIONS
Risk of burns, re, and other injury (cont.):
• Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
• Do not use this mattress to support video equipment such as televisions or computer monitors.
• Do not use high pressure or compressed air inflation systems with this mattress, and do not use
devices that blow hot air (such as hair dryers) to inflate this mattress.
• Do not exceed the weight limit for the mattress (see page 4).
• Not for commercial use. Household use only.
!
WARNING

8
Function Diagram
1. Air Mattress (felt side facing up)
2. Two-Part Air Valve
3. Outer Valve
4. Inner Valve
2
4
3

9
Initial Setup
1. Remove the mattress from its packaging. Unfold
the mattress and place it with the felt side facing
up.
2. Inflate the mattress (see page 9).
3. Let the mattress rest for 8–12 hours before
sleeping on it for the first time. Optionally, allow
the fully-inflated air mattress to air out for
several days in a well-ventilated room.
4. Allow the mattress to air out for 2–3 days in a
well-ventilated room.
Note: PVC material may have a strong smell
when new. This smell is normal and non-toxic. The
mattress materials have passed US CA Prop 65 tests
on lead, cadmium, and phthalates.
Operation
Inating
1. Pull the tab to open the outer air valve. Connect
the included air pump to the valve. [Figure 1.1]
2. Inflate to the desired firmness. Disconnect the
air pump and close the air valve.
Note: Inflation will take about 2 minutes for the
twin-sized mattress, and about 3 minutes for the
queen-sized mattress. Time may vary based on the
environmental temperature and air pump’s pressure
rating.
3. Lie on the mattress to test the firmness.
4. Optionally, adjust the firmness by either
continuing to inflate the mattress or by letting
some air out.
5. Make sure the air valve is completely closed. If
there is a hissing sound or air coming from the
valve, it is not fully closed.
Figure 1.1

10
Deating and Storing
1. Fully open the inner air valve and allow the
mattress to fully deflate. [Figure 2.1]
2. Make sure the mattress is clean and dry.
3. Lay mattress with the felt side facing up. Fold
the mattress. [Figures 2.2 – 2.5]
4. Place the mattress inside the storage bag and
store in a cool, dry place. [Figure 2.6]
Note: Fold the mattress loosely. Avoid sharp bends,
corners, and creases, as these can damage the
mattress.
Figure 2.1