ETEKCITY CL10 User manual
Camping
Lantern
Model No.: CL10
User Manual
Questions or Concerns?
support@etekcity.com • (855)-686-3835
General Safety
• Do not dispose of any part of the lantern in a fire.
• Do not submerge or place the lantern in direct contact with
water or any other liquid.
• Do not replace batteries while hands are wet or while the
lantern is in a wet environment.
• Do not shine the light directly into eyes.
Use & Care
• When not in use, turn off the lantern by completely collapsing
the lantern.
• When installing or changing batteries, make sure to place the
batteries in the correct polarity.
• Using batteries that are not alkaline may shorten the
operating time of the lantern.
• When cleaning, use a damp or dry cloth to wipe the lantern’s
surface.
• When not in use for an extended period of time, remove the
batteries to avoid power drainage.
• Dispose of all parts of the lantern in accordance with local
environmental regulations. Do not dispose of the lantern or
batteries in regular household waste.
Safety Information
Please read and follow all instructions and safety guidelines
in this manual.
Function Diagram
Specications
1. Handles
2. LED Lantern Light
3. Battery Compartment
Battery 3 x 1.5V AA Batteries
Rated Power 3W
Max Brightness 120lm
Light Source 30 LEDs
Weight 0.67 lb / 302 g
Dimensions 3.46 x 3.46 x 4.86 in /
8.8 x 8.8 x 12.4 cm
Operating
Environment
14°–104°F / -10°–40°C
(Relative Humidity: 70%)
Storage Environment -4°–140°F / -20°–60°C
(Relative Humidity: 90%)
Thank you for purchasing the Camping
Lantern by Etekcity.
If you have any questions or concerns, please
reach out to our helpful Customer Support Team at
support@etekcity.com. We hope you enjoy your new
Camping Lantern!
Camping
Lantern
Model No.: CL10
User Manual
Questions or Concerns?
support@etekcity.com • (855)-686-3835
General Safety
• Do not dispose of any part of the lantern in a fire.
• Do not submerge or place the lantern in direct contact with
water or any other liquid.
• Do not replace batteries while hands are wet or while the
lantern is in a wet environment.
• Do not shine the light directly into eyes.
Use & Care
• When not in use, turn off the lantern by completely collapsing
the lantern.
• When installing or changing batteries, make sure to place the
batteries in the correct polarity.
• Using batteries that are not alkaline may shorten the
operating time of the lantern.
• When cleaning, use a damp or dry cloth to wipe the lantern’s
surface.
• When not in use for an extended period of time, remove the
batteries to avoid power drainage.
• Dispose of all parts of the lantern in accordance with local
environmental regulations. Do not dispose of the lantern or
batteries in regular household waste.
Safety Information
Please read and follow all instructions and safety guidelines
in this manual.
Function Diagram
Specications
1. Handles
2. LED Lantern Light
3. Battery Compartment
Battery 3 x 1.5V AA Batteries
Rated Power 3W
Max Brightness 120lm
Light Source 30 LEDs
Weight 0.67 lb / 302 g
Dimensions 3.46 x 3.46 x 4.86 in /
8.8 x 8.8 x 12.4 cm
Operating
Environment
14°–104°F / -10°–40°C
(Relative Humidity: 70%)
Storage Environment -4°–140°F / -20°–60°C
(Relative Humidity: 90%)
Thank you for purchasing the Camping
Lantern by Etekcity.
If you have any questions or concerns, please
reach out to our helpful Customer Support Team at
support@etekcity.com. We hope you enjoy your new
Camping Lantern!
Camping
Lantern
Model No.: CL10
User Manual
Questions or Concerns?
support@etekcity.com • (855)-686-3835
General Safety
• Do not dispose of any part of the lantern in a fire.
• Do not submerge or place the lantern in direct contact with
water or any other liquid.
• Do not replace batteries while hands are wet or while the
lantern is in a wet environment.
• Do not shine the light directly into eyes.
Use & Care
• When not in use, turn off the lantern by completely collapsing
the lantern.
• When installing or changing batteries, make sure to place the
batteries in the correct polarity.
• Using batteries that are not alkaline may shorten the
operating time of the lantern.
• When cleaning, use a damp or dry cloth to wipe the lantern’s
surface.
• When not in use for an extended period of time, remove the
batteries to avoid power drainage.
• Dispose of all parts of the lantern in accordance with local
environmental regulations. Do not dispose of the lantern or
batteries in regular household waste.
Safety Information
Please read and follow all instructions and safety guidelines
in this manual.
Function Diagram
Specications
1. Handles
2. LED Lantern Light
3. Battery Compartment
Battery 3 x 1.5V AA Batteries
Rated Power 3W
Max Brightness 120lm
Light Source 30 LEDs
Weight 0.67 lb / 302 g
Dimensions 3.46 x 3.46 x 4.86 in /
8.8 x 8.8 x 12.4 cm
Operating
Environment
14°–104°F / -10°–40°C
(Relative Humidity: 70%)
Storage Environment -4°–140°F / -20°–60°C
(Relative Humidity: 90%)
Thank you for purchasing the Camping
Lantern by Etekcity.
If you have any questions or concerns, please
reach out to our helpful Customer Support Team at
support@etekcity.com. We hope you enjoy your new
Camping Lantern!
Camping
Lantern
Model No.: CL10
User Manual
Questions or Concerns?
support@etekcity.com • (855)-686-3835
General Safety
• Do not dispose of any part of the lantern in a fire.
• Do not submerge or place the lantern in direct contact with
water or any other liquid.
• Do not replace batteries while hands are wet or while the
lantern is in a wet environment.
• Do not shine the light directly into eyes.
Use & Care
• When not in use, turn off the lantern by completely collapsing
the lantern.
• When installing or changing batteries, make sure to place the
batteries in the correct polarity.
• Using batteries that are not alkaline may shorten the
operating time of the lantern.
• When cleaning, use a damp or dry cloth to wipe the lantern’s
surface.
• When not in use for an extended period of time, remove the
batteries to avoid power drainage.
• Dispose of all parts of the lantern in accordance with local
environmental regulations. Do not dispose of the lantern or
batteries in regular household waste.
Safety Information
Please read and follow all instructions and safety guidelines
in this manual.
Function Diagram
Specications
1. Handles
2. LED Lantern Light
3. Battery Compartment
Battery 3 x 1.5V AA Batteries
Rated Power 3W
Max Brightness 120lm
Light Source 30 LEDs
Weight 0.67 lb / 302 g
Dimensions 3.46 x 3.46 x 4.86 in /
8.8 x 8.8 x 12.4 cm
Operating
Environment
14°–104°F / -10°–40°C
(Relative Humidity: 70%)
Storage Environment -4°–140°F / -20°–60°C
(Relative Humidity: 90%)
Thank you for purchasing the Camping
Lantern by Etekcity.
If you have any questions or concerns, please
reach out to our helpful Customer Support Team at
support@etekcity.com. We hope you enjoy your new
Camping Lantern!
Customer Support
*Please have your invoice and order ID ready before contacting
Customer Support.
Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
USA
Support Hours
Mon–Fri,
9:00 am–5:00 pm PST/PDT
Email: support@etekcity.com
Toll-Free: (855) 686-3835
If you encounter any issues or have any questions about your
new product, please contact our helpful Customer Support Team.
1. Flip the lantern over and twist
the battery compartment lid
counterclockwise to remove it.
2. Remove the insulation strip.
[Figure 1.1]
3. Replace the battery
compartment lid.
Set Up
Operation
Note: If you’re not using the
lantern for an extended period
of time, remove the batteries to
avoid power drainage.
1. Pull up on the handles to
turn on the lantern.
[Figure 2.1] ON
OFF
[Figure 2.2]
[Figure 2.1]
Figure 1.1
Note: Adjust the height to
control the amount of light
emitted from the lantern.
2. Fully collapse the lantern to
turn it off.
[Figure 2.2]
Replacing Batteries
1. Turn off the lantern.
2. Flip the lantern over and rotate
the battery compartment lid
counterclockwise to remove it.
[Figure 3.1]
3. Remove the old batteries
and install new batteries,
making sure they are placed
in the correct polarity.
[Figure 3.2]
4. Replace the battery
compartment lid by rotating
it clockwise.
[Figure 3.3]
Figure 3.1
Figure 3.3
Figure 3.2
Warranty Information
Scan Here to Receive Exclusive News:
Your product comes with 2 years of warranty,
starting from the date of purchase.
1. Scan the QR code or visit
etekcity.com/warranty.
2. Enter your purchase info to receive
exclusive news.
3. Learn about our quality customer support
and gain easy access to warranty
information.
Federal Communication Commission
Interference Statement
FCC SDOC SUPPLIER’S DECLARATION OF
CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Etekcity Corporation hereby declares that this equipment is in
compliance with the FCC Part 15 Subpart B. The declaration of
conformity may be consulted in the support section of our website,
accessible from www.etekcity.com.
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority
to operate this equipment.
A3_22C22_us
Customer Support
*Please have your invoice and order ID ready before contacting
Customer Support.
Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
USA
Support Hours
Mon–Fri,
9:00 am–5:00 pm PST/PDT
Email: support@etekcity.com
Toll-Free: (855) 686-3835
If you encounter any issues or have any questions about your
new product, please contact our helpful Customer Support Team.
1. Flip the lantern over and twist
the battery compartment lid
counterclockwise to remove it.
2. Remove the insulation strip.
[Figure 1.1]
3. Replace the battery
compartment lid.
Set Up
Operation
Note: If you’re not using the
lantern for an extended period
of time, remove the batteries to
avoid power drainage.
1. Pull up on the handles to
turn on the lantern.
[Figure 2.1] ON
OFF
[Figure 2.2]
[Figure 2.1]
Figure 1.1
Note: Adjust the height to
control the amount of light
emitted from the lantern.
2. Fully collapse the lantern to
turn it off.
[Figure 2.2]
Replacing Batteries
1. Turn off the lantern.
2. Flip the lantern over and rotate
the battery compartment lid
counterclockwise to remove it.
[Figure 3.1]
3. Remove the old batteries
and install new batteries,
making sure they are placed
in the correct polarity.
[Figure 3.2]
4. Replace the battery
compartment lid by rotating
it clockwise.
[Figure 3.3]
Figure 3.1
Figure 3.3
Figure 3.2
Warranty Information
Scan Here to Receive Exclusive News:
Your product comes with 2 years of warranty,
starting from the date of purchase.
1. Scan the QR code or visit
etekcity.com/warranty.
2. Enter your purchase info to receive
exclusive news.
3. Learn about our quality customer support
and gain easy access to warranty
information.
Federal Communication Commission
Interference Statement
FCC SDOC SUPPLIER’S DECLARATION OF
CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Etekcity Corporation hereby declares that this equipment is in
compliance with the FCC Part 15 Subpart B. The declaration of
conformity may be consulted in the support section of our website,
accessible from www.etekcity.com.
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority
to operate this equipment.
A3_22C22_us
Customer Support
*Please have your invoice and order ID ready before contacting
Customer Support.
Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
USA
Support Hours
Mon–Fri,
9:00 am–5:00 pm PST/PDT
Email: support@etekcity.com
Toll-Free: (855) 686-3835
If you encounter any issues or have any questions about your
new product, please contact our helpful Customer Support Team.
1. Flip the lantern over and twist
the battery compartment lid
counterclockwise to remove it.
2. Remove the insulation strip.
[Figure 1.1]
3. Replace the battery
compartment lid.
Set Up
Operation
Note: If you’re not using the
lantern for an extended period
of time, remove the batteries to
avoid power drainage.
1. Pull up on the handles to
turn on the lantern.
[Figure 2.1] ON
OFF
[Figure 2.2]
[Figure 2.1]
Figure 1.1
Note: Adjust the height to
control the amount of light
emitted from the lantern.
2. Fully collapse the lantern to
turn it off.
[Figure 2.2]
Replacing Batteries
1. Turn off the lantern.
2. Flip the lantern over and rotate
the battery compartment lid
counterclockwise to remove it.
[Figure 3.1]
3. Remove the old batteries
and install new batteries,
making sure they are placed
in the correct polarity.
[Figure 3.2]
4. Replace the battery
compartment lid by rotating
it clockwise.
[Figure 3.3]
Figure 3.1
Figure 3.3
Figure 3.2
Warranty Information
Scan Here to Receive Exclusive News:
Your product comes with 2 years of warranty,
starting from the date of purchase.
1. Scan the QR code or visit
etekcity.com/warranty.
2. Enter your purchase info to receive
exclusive news.
3. Learn about our quality customer support
and gain easy access to warranty
information.
Federal Communication Commission
Interference Statement
FCC SDOC SUPPLIER’S DECLARATION OF
CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Etekcity Corporation hereby declares that this equipment is in
compliance with the FCC Part 15 Subpart B. The declaration of
conformity may be consulted in the support section of our website,
accessible from www.etekcity.com.
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority
to operate this equipment.
A3_22C22_us
Customer Support
*Please have your invoice and order ID ready before contacting
Customer Support.
Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
USA
Support Hours
Mon–Fri,
9:00 am–5:00 pm PST/PDT
Email: support@etekcity.com
Toll-Free: (855) 686-3835
If you encounter any issues or have any questions about your
new product, please contact our helpful Customer Support Team.
1. Flip the lantern over and twist
the battery compartment lid
counterclockwise to remove it.
2. Remove the insulation strip.
[Figure 1.1]
3. Replace the battery
compartment lid.
Set Up
Operation
Note: If you’re not using the
lantern for an extended period
of time, remove the batteries to
avoid power drainage.
1. Pull up on the handles to
turn on the lantern.
[Figure 2.1] ON
OFF
[Figure 2.2]
[Figure 2.1]
Figure 1.1
Note: Adjust the height to
control the amount of light
emitted from the lantern.
2. Fully collapse the lantern to
turn it off.
[Figure 2.2]
Replacing Batteries
1. Turn off the lantern.
2. Flip the lantern over and rotate
the battery compartment lid
counterclockwise to remove it.
[Figure 3.1]
3. Remove the old batteries
and install new batteries,
making sure they are placed
in the correct polarity.
[Figure 3.2]
4. Replace the battery
compartment lid by rotating
it clockwise.
[Figure 3.3]
Figure 3.1
Figure 3.3
Figure 3.2
Warranty Information
Scan Here to Receive Exclusive News:
Your product comes with 2 years of warranty,
starting from the date of purchase.
1. Scan the QR code or visit
etekcity.com/warranty.
2. Enter your purchase info to receive
exclusive news.
3. Learn about our quality customer support
and gain easy access to warranty
information.
Federal Communication Commission
Interference Statement
FCC SDOC SUPPLIER’S DECLARATION OF
CONFORMITY
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Etekcity Corporation hereby declares that this equipment is in
compliance with the FCC Part 15 Subpart B. The declaration of
conformity may be consulted in the support section of our website,
accessible from www.etekcity.com.
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority
to operate this equipment.
A3_22C22_us
Other manuals for CL10
1
Table of contents
Other ETEKCITY Lantern manuals
