ETI EXM Series User manual

Optional Bracket
Electromagnetic Lock Installation Instruction
EXM SERIES
Bracket installation is according to door swing direction and door frame type ,e.g . narrow frame door, frame less glass door, inswing door, etc .
Regular Installation
(outswing door) L-bracket for narrow
frame (optional}
Regular Installation
Template
Armature Plate
Hollow Metal Door
o,tdoo,~
1/2" 5/16"
Fold the mounting template 90·.
Place the template to the proper
position of the door and frame . Mark
the hole positions of the template on
the door and frame .
Drill the holes according to the
marks .
Please install the armature plate as
illustrated here. (Dimensions of the
holes are depending on the door
types as illustrated below .)
Drill a5/16"hole
throughdoor,
onclosingside Outdoor
enlargeto1/2"
byasexnutbolt
ontheopening
side.
Solid Door
1/2" 5/16"
LI-bracket for frameless
glass door (optional}
®
®
LZ-bracket for inswing
door (optional}
INSTALLATIONWITH
MOUNTINGPLATE
Fasten the mounting plate with the
mounting screws . The position of the
mounting plate should be adjustable .
INSTALLATION
DIRECTTO DOORJAM
t
Connectthe powerand test the unit.
Insert the anti-tamper caps into the
holesof mountingscrews.
IButt Splice(IDC) Connector
Using crimper or pliers and pressing the header of connector
down to even position .

ILZ or Z bracket for inswing doors
1
Find a mounting position on the
door frame for the L bracket. Make
sure that the door is still closeable .
5
Fasten the armature plate to the Z
bracket(Mustadd rubberwasher).
Connecting Diagram
Wire Leads
2
Use the fixing bolts to tighten the
electromagnetic lock on L bracket.
(For face mount, the magnetic lock
can be mounted directly on the door
frame .)
6
Close the door and connect the
power .
Voltage
4( Wire Leads
Voltage Selection:12VDC
•".,..~R=e=d--,,-----1 +
• White I Power
supply
"'::
Dual voltage
(Powerinput ispolarity free)
EXM600
EXM1200
7CWire Leads
Dual voltage and
Bond SensorOutput
(Powerinput ispolarity free)
EXM600M
EXM1200M
.
V
~
Black I
Green ' --:
! !
Control Device
N.C.contact or AccessRelay
Voltage Selection: 12VDC
.._~R=ed~~----t +
White I
Black I
Green !___________i
Control Device
Power
supply
N.C.contact or AccessRelay
~
4
3~ • .p
~
\~--~)
Assemble the Z bracket, and make
sure that the Z bracket is adjustable . Insert the guide pins into the
armature plate .
7
After the mag lock attracts the
armature adjust plate , the Z
bracket to fit the door .
Voltage Selection:24 VDC
1---'-'R=ed,_____ -t +
IA/h;fo
I
Black
Green
Control Device
Power
supply
N.C.contact or AccessRelay
Voltage Selection: 24VDC
t--'R=e=d-----1 +
White I
Black , _,
Green !___________i
Power
supply
c=>ll Outdoor
Fasten the Z bracket to the door .
Bond sensor output
Bondsensoroutput
Indicatesthelocked
(N.O.contactor unlocked
status
(N.C.contact)
(Relayrated0.5N20 VDC)
Yellow :N.O.
Blue :COM.
......Brown:N.C.
Control Device
N.C.contact or AccessRelay