ROFU 8035 User manual

ROFU 8035 SHEARLOCK
INSTALLATION MANUAL
The 8035 series is available in two models, the 8035 is unmonitored or the 8035-002
has hall-effect monitoring. The units may be installed in wood, , metal or glass doors
with or without available housings. This manual gives a guide to all of the above applications
and other useful installation information.
1. Full Dimensional Drawing
2. Technical Specification
3. Flush Installation
4. Semi-Flush Installation
5. Surface Installation
6. Full Glass Door Installation
Copyright © ROFU Security International Corp. All rights reserved.
ROFU-8035 Published on: 2015.08.24
RFU
O
ROFU Security International Corp.
10029 South Tacoma Way, E-11
Tacoma, WA 98499
1-800-255-7638
www.rofu.com

ROFU 8035 Magnetic Lock Assembly

Full Dimension
Magnet Assembly
Armature Assembly
Side View
Magnet Assembly
A
rmature Assembly
7.09” (180mm)
1.06”
(27mm)
0.91”
(23mm)
1.06”
(27mm)
0.91”
(23mm)
6.46” (164mm)
6.46” (164mm)
7.09” (180mm)
6.46” (164mm)
7.09” (180mm)
0.63” (16mm)
1.18”(30mm)
0.63” (16mm)
1.18” (30mm)

TECHNICAL SPECIFICATION
VOLTAGE 12VDC / 24VDC Selectable via jumpers
+ 10% over voltage is acceptable
Under voltage will reduce holding force
24 VOLT
JUMPER
SETTI N G
12 VOLT
JUMPER
SETTI N G
CURRENT CONSUMPTION 350mA @ 12VDC
190mA @ 24VDC
The unit does not require an initial voltage
Increase to operate.
DIMENSIONS
OPERATING TEMPERATURE -30C to +50F
HOLDING FORCE: Up to 1500 lbs (680 kgs) in shear.
DYNAMIC STRENGTH FORCE: Up to 70 ft-lbs.
NOTE: THE LOCK SHOULD BE POWERED BY A LISTED UL603 / UL1023 POWER SUPPLY
UNIT FOR USE WITH BURGLARY ALARM SYSTEMS.
Model
8035
Wire Gauge
0.01” (0.23 mm )
Number of Turns
420
Double Turns
Maximum
Electric Resistant
at 20℃
()
25.3
7 1/16” x 1 3/16” x 1 1/16” (180mm x 30mm x 27mm) Magnet
7 1/16” x 1 3/16” x 1 5/8” (180mm x 30mm x 42mm) Armature
7 3/16” x 1 7/16” x 1 7/8” (182mm x 36mm x 48mm) SMB200-HOUSING
Ω

FLUSH INSTALLATION
The unit is designed to be flush mounted. The magnet should be fitted into the header (jamb)
and the armature plate into the top of the door.
It is vital that a minimum gap of 1/16”(2mm) exists between the magnet and the armature,
to allow correct operation.
Min. Clearance
1/16”(2mm) of gap
Using supplied key wrench to adjust
armature plate to approx. 1/16” (2mm)
of gap between magnet surface.

SEMI-FLUSH INSTALLATION
The unit may also be fitted semi-flush with the use of the 21036 housing. The magnet should be
fitted to the door transom and the housing holding the armature on to the door.
It is vital that a minimum gap of 1/16” (2mm) exists between the magnet and the armature,
to allow correct operation.
1/16”
(2mm)
Min. Clearance
1/16” (2mm) of gap
Using supplied key wrench to adjust armature
plate to approx. 1/16” (2mm) of gap between
magnet surface.

SURFACE INSTALLATION
The unit may also be fitted surface mounted using 2pcs of the 21036 or 21054 (Tamperproof)
housing. The housing holding the magnet should be fitted above the door and the housing
holding the armature on to the door.
It is vital that a minimum gap of 1/16” (2mm) exists between the magnet and the armature,
to allow correct operation.
Min. Clearance
1/16” (2mm) of gap
Using supplied key wrench to adjust armature
plate to approx. 1/16” (2mm) of gap between
magnet surface.

FULL GLASS DOOR INSTALLATION (NOT VERIFIED BY UL)
The unit may also be fitted to a full glass door and glass frame application, using 2pcs of the
21036 housing and 2pcs of the 21037 U-brackets. The housing holding the magnet should be
clapped above the door and the housing holding the armature clapped on to the door.
It is vital that a minimum gap of 1/16” (2mm) exists between the magnet and the armature,
to allow correct operation.
Min. Clearance
=1/4” (7mm)
Min. Gap
=1/16” (2mm)
Min. Clearance
1/16” (2mm) of gap
Using supplied key wrench to adjust
armature plate to approx. 1/16” (2mm)
of gap between magnet surface.

NOTICE:
For Vertical
Installation
Change the
spring which is
provided in the
screwpack.
ROFU Security International Corp.
10029 South Tacoma Way, E-11
Lakewood, WA 98499 USA
www.rofu.com / 1-800-255-7638