Yale Assure Lock YRC256 Technical specifications

1
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
Retrofitting or modifying this product may impact fire rating, safety features and warranty.
Consult with code specifications to ensure compliance with all codes and ratings.
Before you begin
for step-by-step installation
instructions & to register
your product
DOWNLOAD
THE BILT APP
4" Shown - 5.5" Available
Inside
of Door
Outside
of Door
Yale® Assure Lock®
Interconnected Key Free Touchscreen
Installation and Programming Instructions
(YRC256/YRC652)
®
Smart Module
(Optional)

2
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
Before You Begin
1-3/8" (35mm) Min to
1-3/4" (44.5mm) Max
4-1/2"
(114) Min
x1
x2 x8 x2
x2
Smart Module
(Optional)
3/32"
1/8" #2
1/8" 2-1/8"
1
1" x2 Black
M6x44mm
PPHMS
(Standard 1-3/4" - 2")
OR
x2 Gold
M6x36mm
PPHMS
(1-3/8")
Template
Door Thickness
FOLD HERE Door Edge
Recommended Centerline
36" (91 cm) From Floor.
Backset
5/32"
(3.96mm)
Caution: Copy machines
may change the size of the
template and make it
inaccurate.
263006837 (01-16)
1" (25mm)1" (25mm)
2-1/8" (54mm)
2-1/8" (54mm)
2-3/4" (70mm)
2-3/8" (60mm)
4" (101mm)
5-1/2" (139.7mm)
1" (25mm)
2-1/8" (54mm)
"Backset" is the distance
from the door edge to the
center of the mounting
hole for the lever.
1-3/8"
(35mm)
1-3/4"
(45mm)
Caution: Although a door
can be prepared by an
untrained person, Yale
recommends that
measurements and drilling
be done by a skilled
carpenter or locksmith.
Yale® is a registered trademark of Yale
Security Inc., an ASSA ABLOY Group
company. Copyright © 2016, Yale
Security Inc., an ASSA ABLOY Group
company.
All rights reserved. Reproduction in
whole or in part without the express
written permission of Yale Security Inc.
is prohibited.
www.yalelocks.com
1-800-438-1951
Interconnected
Lockset
An ASSA ABLOY Group brand
2-3/8" (60mm)

3
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
Mark Door Reference Lines
C
L
M
O
E
V
R
E
EXISTING
2-3/8" or 2-3/4"
Backset
Template
Door Thickness
FOLD HERE Door Edge
Recommended Centerline
36" (91 cm) From Floor.
Backset
5/32"
(3.96mm)
Caution: Copy machines
may change the size of the
template and make it
inaccurate.
263006837 (01-16)
1" (25mm)1" (25mm)
2-1/8" (54mm)
2-1/8" (54mm)
2-3/4" (70mm)
2-3/8" (60mm)
4" (101mm)
5-1/2" (139.7mm)
1" (25mm)
2-1/8" (54mm)
"Backset" is the distance
from the door edge to the
center of the mounting
hole for the lever.
1-3/8"
(35mm)
1-3/4"
(45mm)
Caution: Although a door
can be prepared by an
untrained person, Yale
recommends that
measurements and drilling
be done by a skilled
carpenter or locksmith.
Yale® is a registered trademark of Yale
Security Inc., an ASSA ABLOY Group
company. Copyright © 2016, Yale
Security Inc., an ASSA ABLOY Group
company.
All rights reserved. Reproduction in
whole or in part without the express
written permission of Yale Security Inc.
is prohibited.
www.yalelocks.com
1-800-438-1951
Interconnected
Lockset
An ASSA ABLOY Group brand
2-3/8" (60mm)

4
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
1Preparing Door (if necessary)
!
Drill holes 1/2 way thru
door then complete
from other side to
prevent splitting.
Ø2-1/8" 2-3/8"
or
2-3/4"
Ø1"
4"
or
5.5"
Template
Door Thickness
FOLD HERE Door Edge
Recommended Centerline
36" (91 cm) From Floor.
Backset
5/32"
(3.96mm)
Caution: Copy machines
may change the size of the
template and make it
inaccurate.
263006837 (01-16)
1" (25mm)1" (25mm)
2-1/8" (54mm)
2-1/8" (54mm)
2-3/4" (70mm)
2-3/8" (60mm)
4" (101mm)
5-1/2" (139.7mm)
1" (25mm)
2-1/8" (54mm)
"Backset" is the distance
from the door edge to the
center of the mounting
hole for the lever.
1-3/8"
(35mm)
1-3/4"
(45mm)
Caution: Although a door
can be prepared by an
untrained person, Yale
recommends that
measurements and drilling
be done by a skilled
carpenter or locksmith.
Yale® is a registered trademark of Yale
Security Inc., an ASSA ABLOY Group
company. Copyright © 2016, Yale
Security Inc., an ASSA ABLOY Group
company.
All rights reserved. Reproduction in
whole or in part without the express
written permission of Yale Security Inc.
is prohibited.
www.yalelocks.com
1-800-438-1951
Interconnected
Lockset
An ASSA ABLOY Group brand
2-3/8" (60mm)

5
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
2Installing Strike Plates
Door Frame
Inside
of Door
Frame
1" Dia. x
1"Deep
1" Dia. x
1/2"Deep
Frame
7-16 / 8-32 x 1" UNCWS
x4

Left Hand “LH”, Hinges Left.
Open Inward.
Left Hand Reverse "LHR", Hinges Left.
Open Outward.
Right Hand "RH", Hinges Right.
Open Inward.
Right Hand Reverse "RHR", Hinges Right.
Open Outward.
The hand of a door is determined from the secure side of the
door. The term "secure" means the side from which you initially
unlock and enter.
Determining Handing
6
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A

7
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
3Changing Handing (if necessary)
4-24 x 1/4" PPHMS
4" Left Hand to 4" Right Hand Shown
x2
3
!
DO NOT TAMPER
WITH OR LOOSEN
E-CLIP AND ITS
ASSEMBLY
!
DO NOT LOOSEN
THESE 6 SCREWS
OR REMOVE
COVER

Changing Handing (if necessary)
continued
3
8
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A

9
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
Lockset Handing Configurations
4" Left Hand
For 5.5"
For 4"
4" Right Hand
For 5.5"
For 4"
After handing is changed, check that lever and thumbturn rotate freely.
Test Lever and Thumbturn
!
Confirm RH is
visible thru RH hole
as shown for
right hand installation.
!
Confirm LH is
visible thru LH hole
as shown for
left hand installation.

10
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
4Installing Fire Cup
Inside of Door
Fire Cup and a UL marked
Latchbolt must be used to
qualify for UL listing.
!

11
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
5Adjusting Deadbolt Latch
O
optional
default
UP
2-3/8" position
UP
2-3/4" position
Press
Pull

12
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
6Installing Deadbolt Latch & Latchbolt
x4
7-16 / 8-32 x 1" UNCWS
Choose latchbolt
based on backset.
(2-3/8" or 2-3/4")
Inside of Door
Bolt must be in
retracted (unlocked)
position before
installing.
!
Ensure arrow
stamped on deadbolt
is UP.
!
UP
Spacer collar
must be used for
1" edge bore.
Collar can be
removed for
3/4" edge bore.
Edge bore can be
3/4" or 1" only.
Curved edge
of latchbolt faces
direction door closes.
!

7Installing Exterior Deadbolt
UP
Inside of Door
Confirm bolt is
retracted (unlocked).
!
Choose
through bolt
appropriate
for your door
thickness.
!
M6x44 PPHMS for standard door thickness shown
x2
13
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A

14
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
8Installing Lock Chassis
10-32 x 1-1/2" PPHMS
Inside of Door
x2
U
P

15
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
9Securing Back Plate to Door
!
!
Two #6-32 x 1/2"
POHMS screws must
be used to qualify for
UL listing.
Drill two
pilot holes
Ø1/8"
x 1/2" deep
Inside of Door
U
P
x2
#6-32 x 1/2" POHMS

16
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
Testing Latchbolt Operation
Outside of Door

17
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
10 Attaching the Cable Assembly
Test that cables
are securely
connected.
!
U
P
Inside of Door
Avoid interference
with movement of lock
when routing cable.
!

18
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
11 Installing Interior Lock
Turn
thumbturn
to adjust tailpiece
orientation.
!
!
U
P
Inside of Door

19
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
11 Installing Interior Lock continued
10-32 x 5/8" POHMS
x1
6-32 x 1" PPHMS
x2
Inside of Door
DO NOT
LOOSEN
THIS SCREW
!

20
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
Pull lever
to ensure
it is secure.
12
"SNAP"
Installing Interior Lever
Inside of Door
Inside of Door