etto bicycle helmet User manual

User manual bike_outline.indd 1 9/30/2011 11:16:41 AM

Thank you for choosing ETTO bicycle helmet.
Read the user manual closely before you start using your ETTO helmet.
Safety:
It often ends up with speed and fall when children and grown-ups are bicycling
or performing other summer activities that the helmet is meant for, therefor it
is important to protect your head with a good and safe helmet. The equipment
is treaded roughly sometimes and because of that ETTO bicycling helmets is
designed to withstand harsh conditions, while protecting the users optimally.
WARNING:
Bicycle helmets will never guarantee 100% safety – show precaution when
bicycling, skate boarding or roller skating.
WARNING:
The material of the helmet will react in contact with cleaning supplies, paint
and other chemical additives. A helmet that has been exposed must be
condemned and a new one should be purchased, even though the damage
in not visible.
Area of use:
Helmet for bicycling, skate boarding and roller skating.
Approved after European standards CE
Important:
• A helmet that has been in an impact must be condemned and a new one
should be purchased, even though the damages are not visible.
other than on the recommendation of ETTO. Other equipment and accessories
must not be attached to the helmet other than those recommended by ETTO.
• Take precaution for others and yourselves when bicycling or using
skate board/roller blades.

GB
User manual bike_outline.indd 11 9/30/2011 11:19:39 AM
Choose the right size:
right one for you that feels secure and comfortable.
1. The helmets size is described in cm, calculated out from the heads
circumference. Most of the bicycling helmets from ETTO comes in
Etto Powerstrap®
Most of the ETTO bicyckling helmets is equipped
with ETTO Powerstrap adjustment system.
Turn the adjustment wheel clockwise to tighten the helmet around the
head and counterclockwise to loosen it. The helmet should sit closely
without uncomfortable pressure.
Maintenance:
Clean ETTO bicycle helmets with a moist cloth and mild soap. Rinse the
padding inside the helmet in hot water or wash it in the washing
machine at 40 C. Store the helmet in a dry place without direct sun light.
Transport the helmet in a secure way without the hazard of damaging it.
Check to see if the helmet is damaged before using it.
2. The correct size will have been selected when
uncomfortable pressuring point. Make sure that it is
not any space between the head and the padding.
Use ETTO Po
3. Place the helmet horizontally on the head for
optimally protection (see picture).
4. Adjust the straps so that they forms a Y shape, as close till the ear
as possible and fasten the straps under the chin (see picture).
5. Adjust the chinstrap by loosen or tighten through the buckle.
The straps should sit tightly on your skin without being uncomfortable.
6. The buckle shall be positioned away from the jawbone.
7. Always fasten the chinstrap for optimal protection and correct
use of the helmet.

User manual bike_outline.indd 22 9/30/2011 11:22:46 AM
Hamax AS
Vålerveien 159,
1599 Moss
Norway
Made in China
EU Declaration of Conformity:
www.etto.eu/ec-declarations-of-conformity/
EN1078+A1:02/2013
EU 2016/425