Eureka 8860-8899 Series User manual

QUICK START GUIDE
8860-8899 Series
What’s in the carton
STEP
1
1
Vacuum body & hose
Handle &
2 screws
Important safe guards
Easy assembly
Slide on handle. Insert tab & rotate into position.
ighten two screws.
Wrap cord. Place dusting brush
behind handle. Snap Power Paw®
onto handle.
Place crevice tool &
wand into tool caddy.
STEP
2
2
Get ready to vacuum
ighten 2 screws. Secure hose into
hose retainer.
Place hose over
hose hook.
Push bottom switch off (O)
for bare floor. Set height
adjustment to bare floor.
Step on handle release to
lower handle into position.
Adjust height for carpet.
If vacuum is hard to push,
raise carpet setting.
Plug into outlet and
push switch (I) on. Push
bottom switch for carpets.
STEP
3
3
Use a Phillips
screwdriver.
PROBLEM SOLVING
Refer to Owner’s Gui e.
MAINTENANCE SCHEDULE
Refer to back of ust cup or Owner’s Gui e.
REGISTRATION
OWNER’S
GUIDE
Before returning, call
Eureka Customer Service
HELPLINE
1-800-282-2886
8 a.m. to 7:30 p.m. (CS ), Monday - Friday
10 a.m. to 6:30 p.m. (CS ), Saturday - Sunday
www.eureka.com
T
h
a
n
k
y
o
u
f
o
r
p
u
r
c
h
a
s
i
n
g
y
o
u
r
n
e
w
E
u
r
e
k
a
v
a
c
u
u
m
!
!
Power Paw®
Dusting brush Self-cleaning
duster
Crevice tool &
extension wand
Stair hose
SPECIAL
FEATURE
Available on
some models
ool caddy (carrying handle)
& 2 screws
Lift latch to remove
dust cup. Empty after
each use.
Push power switch on, turn
knob to clean and activate
static charge for 10 seconds.
urn to extend. Push firmly
to collapse & turn to lock.
For accessories: Loosen
end of wand, pull out
and attach tool.
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts. Make sure power switch is in OFF (O) position before
plugging in power cord. Assemble the vacuum cleaner before using.