Euro CB Supertooth II User manual

1
UserGuide
SupertoothII
Universal BluetoothHandsfree KitwithDSP
Contents
____________________________________________________________
ProductOverview . ..........................1
Switching On/Off............................2
Charging ........................ ........2
Installation........................ .......2
Pairing toaMobilePhone .................. .....3
Indicator Status...................... .......4
Hands-free Profile ...........................4
SuperToothII Operations................. .....4
ButtonFunctionsMatrix................. .....5
HeadsetProfile.. . ................... ....6
SuperToothII Operations................. .....6
ButtonFunctionsMatrix................. .....7
SuperToothII isequippedwithBluetoothand DigitalSignalProcessor
whichallowwireless communicationsondevicessuchascellularphones.
Thisisdesigned tobeatotallyportablewireless handsfreekitwhichwill
enabletheusertocommunicatefreelywithoutholdingthe phone.Thiswill
workon anyBluetoothcellularphonesavailableprovided thattheyrespect
the Bluetoothprotocol.
1SwivelArm
2Reject Button
3HeadphoneJack
4Speaker
5ChargerInput
6Accept/ End Button
7Microphone
8BluetoothIndicator
9ChargeIndicator
10 VolumeControl
A.PRODUCTOVERVIEW

2
Note:The SwivelArm[1] can beadjustedto0º , 55ºand 210ºorientations.
Poweron: Flipup the SwivelArm [1] from0º to55ºto210º
positions.TheBluetoothindicator[8]will glow(blue blink).This
indicatesthatthe kitisready(standbymode). Note:At firstuse,the
userhastopair SuperToothII withhisphone (refertoSection E
PAIRING TOA MOBILE PHONE.)
Poweroff: Flipdownthe SwivelArm to0º position.The Bluetooth
Indicatorwill becomered thenturnsoffafterasecond.
1.Plugthe batterychargerconnectorintothe ChargerInput[5] of
SuperToothII.
2.Plugthe otherendof the chargerintothe electricaloutlet.
FixingofClip
Fixthe metalclipof SuperToothIIonthesun
visor.
Sun visor
Attachthemagneticback ofSuperToothII to
the fixed metalclip.The SuperToothmustbe
placed whereinitsmicrophone willbe directed
tothemouthofthe user.
ThepositionoftheSuperToothIIcanvary
accordingtotheposition ofthesunvisor.The
SwivelArm(1) can beadjustedto0º,55º
and 210º orientations.
B.SWITCHING ON/OFF
C.CHARGING
D.INSTALLATION

3
Pairingwill createalinkorconnectionbetween the twoBluetoothdevices,
the SuperToothII andyourphone.
1.Bringthe mobilephoneatabout20cmfromthe SuperToothII.
2.The SuperToothII isinitiallyoff;Turniton byflipping
up the SwivelArm[1] to 55º position. TheBluetooth
Indicator[8]will glow(blue blink).
3.Simultaneouslypress the RejectButton[2] and
Accept/End Button[6] forabout5seconds.A
distinctivetone willbe heardand the Bluetooth
IndicatorLEDwill changefromblinkingblue to
alternateblinkingred and blue.TheSuperToothII
isnowinPairing Mode.
4.Whilethekitisatpairingmode,access theBluetoothmenuofyour
phone.(Kindlyrefertoyourphone’smanual.)Turnon itsBluetooth
functionthenexecuteaBluetoothsearchsothatitwill be abletosearch
and find your SuperToothII.
5.When the phone displaysthe listoftheBluetoothdevicesitfound,
select the nameofthiskit (SuperToothII).
6.When the phoneasks forthepasscode,enter0000.Pairingis
successfulifthe alternatingred/bluelights ofBluetoothIndicator
changesto plainblinking blue. Note:Normally,thephonewouldalso
showbrieflyon itsdisplayifit’salreadypairedand connectedto
the SuperToothII or ifpairing withitfailed.
ImportantNote: Somephonesdonotconnectdirectlyafterentering
0000.Toconnect,you needto shortpress the Accept/ End Button[6].
Or,
(Inyourphone) Goback toBluetooth>Paireddevices>highlightthe
nameofthiskit(SuperToothII)>press Options>thenpress
Connect).
If pairinghasbeen successful, the SuperToothII isnowreadytouse.
E.PAIRING TOAMOBILE PHONE (notpossible while chargingthe SuperTooth II)

4
STATUSBluetoothIndicator [8]ChargeIndicator [9]
Pairing Mode Alternate Blinking - Red /Blue
Standbymode Blinking Blue
On Call SteadyBlue
LowBatt Blinking Red
Charging Alternate Red / Green
Fully Charged SteadyGreen
Ringing Fast Blinking Blue
Supertooth II
OPERATIONS
Make aCall (Normaldial): Dialthe numberusingyourphone.Normally,
audiowill be on theSuperToothII.
Note:WithsomephoneslikeSiemensS55;PanasonicX70,audiois
always on the phoneduring an outgoingcall.You will need toshort
press Accept/ End Button[6] totransfertheaudiotoyourkit.
Make aCall (Voicedial):
1.First, you havetoaccess the voicedialingfunctionofyourphone,
turnit on and recordfora voicetag.(Kindlyrefertotheprocedurein
yourphone’smanual.) Note:Voice dialing entries mustbestored
inthephone’smemory, noton theSIMcard!
When done,executevoicedialinginyourkitbyproceedingwiththe
instructions.
2. ExecuteVoicedial: Short press Accept/ End Button[6].
3.Abeep/shorttone will thenbeheardonthe SuperToothII prompting
the usertosaythe voicetagof acontact tocall.
4.Saythevoicetag.The voicewill be played back toyou (audioonkit)
thenthephonewill dialthe numberautomatically.
Make aCall (Redial):
Longpress the Accept/ End Button[6]. Audiowill be on the SuperToothII.
End aCall (2optionsforHands-freeProfile):
Shortpress the Accept/ End Button[6] orshort press RejectButton[2].
F.Indicator Status
G. HANDS-FREE PROFILE

5
AnsweraCall: When thephonereceivesacall, ringtone will be on the
SuperToothII alone,orbothonthe SuperToothII and on the phone
(dependingonyourphone model).Justshortpress Accept/End
Button[6] toanswerthe call.
RejectaCall: Shortpress RejectButton[2] torejectan incomingcall.
SettheVolume: Setthe volumeusingthe VolumeControl[10].
1.Turnit clockwisetoincreasethe volume.
2.Turnit counterclockwisetodecrease.
Note:Ifthevolumesetistoohigh,itcan causefeedback(whistling
sound), echo,orbackground noiseduringcallson somecell phones.
AudioTransfer:
from PhonetoSuperToothII (SuperToothII initiated):
Short press the Accept/ End Button[6].
from SuperToothII toPhone (SuperToothII initiated):
Longpress RejectButton[2].
Accept / End
Button
(Short press)
Accept / End
Button
(Long press)
Reject Button
(Short press)
Reject Button
(Long press)
Connected / StandbyInitiatesvoicedial Redials lastdialled
number
Disconnected/
Standby
Creates
reconnection
and initiates
voicedial
Creates
reconnection and
redialslast dialled
number
Incoming call (ring
being generated) Acceptsthe call Rejectsthe call Rejectsthe call
Removesthe
ring audio from
SuperTooth II
Activecallat
SuperTooth II Endsthe call Redials lastdialled number Endsthe call Transfersaudio to Phone
Activecallat Phone
Transfersthe
audioto
SuperTooth
Activatesthe
SuperTooth IIand
createsanother
redialof the last
dialled number
Outgoing call being
set-up Endsthe callEndsthe call Transfersaudio to Phone
H.Button FunctionsMatrix(Hands-free Profile)

6
Supertooth II
OPERATIONS
Make aCall (Normaldial): Dialthe numberusingyourphone.Normally,
audiowill be on thekit.
Note:WithsomephoneslikeSiemensS55;PanasonicX70,audiois
always on the phoneduring an outgoingcall.You will need toshort
press Accept/ End Button[6] totransfertheaudiotoyourkit.
Make aCall (Voicedial):
1.First, you havetoaccess the voicedialingfunctionofyourphone,
turniton andrecordfora voicetag.(Kindlyrefertothe procedure
inyourphone’smanual.) Note:Voicedialing entriesmustbe
storedinthephone’smemory,noton theSIMcard!
When done,executevoicedialinginyourkitbyproceedingwiththe
instructions.
2. ExecuteVoicedial: Short press Accept/ End Button[6].
3.Abeep/shorttonewill then be heardonthe SuperToothII prompting
the usertosayavoicetagofacontacttocall.
4.Saythe voicetag.Thevoicewillbe playedback toyou (audioon
kit)then thephonewill dialthenumberautomatically.
End aCall (only1procedureforHeadsetProfile):
Shortpress the Accept/ End Button[6].
AnsweraCall: When thephonereceivesacall, ringtone will be on the
SuperToothII alone,orbothonthe SuperToothII and on the phone
(dependingon yourphonemodel).Justshortpress Accept/End
Button[6] toanswerthe call.
SettheVolume: Setthe volumeusingthe VolumeControl[10].
1.Turnit clockwisetoincreasethe volume.
2.Turnit counterclockwisetodecrease.
Note:Ifthevolumesetistoohigh,itcan causefeedback(whistling
sound), echo,orbackground noiseduringcallson somecell phones.
I. HEADSETPROFILE

7
AudioTransfer:
from PhonetoSuperToothII (SuperToothII initiated):
Short press the Accept/ End Button[6].
Accept / End
Button
(Short press)
Accept / End
Button
(Long press)
Reject Button
(Short press)
Reject Button
(Long press)
Connected / StandbyInitiatesvoicedial
Disconnected/
Standby
Creates
reconnection
and initiates
voicedial
Incoming call (ring
being generated) Acceptsthe call
Activecallat
SuperTooth II Endsthe call
Activecallat Phone Transfersthe call
to SuperTooth II
Outgoing call being
set-up Endsthe call
J.Button FunctionsMatrix(HeadsetProfile)
FCC Notices
Thisdevice complies withpart15 oftheFCC rules.Operation issubjecttothe
followingtwoconditions:(1)Thisdevice maynotcause harmfulinterference,and (2)
Thisdevice mustacceptanyinterferencereceived,includinginterference
thatmay
cause undesiredoperation.
You arecautioned thatchanges ormodifications notexpresslyapprovedbythe part
responsiblefor compliance couldvoidtheuser’sauthoritytooperatetheequipment.
FCC RFExposurerequirements:
“Thisdevice and itsantenna(s)must not be co-
located or operatinginconjunction with
anyother antenna ortransmitter.”