Eurolux FS247 User manual

LED Floodlights
FS247: 1 x 10W Integrated LED 230V
FS248: 1 x 20W Integrated LED 230V
FS249: 1 x 30W Integrated LED 230V
FS250: 1 x 50W Integrated LED 230V
FS251: 1 x 100W Integrated LED 230V
ILLUSTRATIONS
FS247 / FS248 / FS249 / FS250 / FS251
ENVIRONMENTAL PROTECTION
Waste electrical & Electronic equipment regulations requires that any of our products
showing this marking must not be disposed of with other household or commercial
waste. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate any such products from other waste types and recycle it
responsibly at your local facilities.
PRODUCT CODE
Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
www.eurolux.co.za
Please read instructions before commencing installation and retain for future reference.
FS247 FS248 FS249
FS250 FS251

• Fitting material: Die cast aluminium with clear tempered glass lens.
• Class: Class1. Requires earth connection.
• IP Rating: IP 65
• Voltage: 230V ~ 50Hz
• Dimensions: FS247 - (H)75mm x (W)89mm x (D)30mm*
FS248 - (H)115mm x (W)136mm x (D)36mm*
FS249 - (H)156mm x (W)186mm x (D)45mm*
FS250 - (H)200mm x (W)240mm x (D)47mm*
FS251 - (H)260mm x (W)312mm x (D)49mm*
• Weight: FS247 - 0.23kg
FS248 - 0.43kg
FS249 - 0.831kg
FS250 - 1.341kg
FS251 - 2.506kg
• Lamp Type: FS247 - 1 x 10W Integrated LED 230V
FS248 - 1 x 20W Integrated LED 230V
FS249 - 1 x 30W Integrated LED 230V
FS250 - 1 x 50W Integrated LED 230V
FS251 - 1 x 100W Integrated LED 230V
• Maximum Projected Area: FS247 - 0.0032m2
FS248 - 0.008715m2
FS249 - 0.016159m2
FS250 - 0.0285m2
FS251 - 0.0495m2
• Commercial / domestic use
• Suitable for outdoor use when used correctly.
• Thisxturemustbemountedinthehorizontalposition.
• The light source of this luminaire is not replaceable. When the light source reaches its end of life the
whole luminaire should be replaced, or the light source should only be replaced by the manufacturer.
SPECIFICATIONS
CLEANING
• Before cleaning always ensure the power supply is turned off.
• Do not immerse the luminaire in water.
• No abrasive products, solvents, detergent may be used to clean this luminaire.
• Ensure that the luminaire does not come in contact with corrosive chemicals, etc.
• Coastal areas ensure that the luminaire is cleaned fortnightly.
FS247 / FS248 / FS249 / FS250 / FS251 - attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplacedby
themanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.
To ensure that you get maximum longevity and maximum use out of your luminaire, please
observe the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire must
 becarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletionof
 installation,ensurethattheCerticateofComplianceisupdated.
• Before connecting this luminaire, ensure that voltage indicated on the rating label corresponds with the
mains voltage in your home.
• When changing the lamp, ensure that the power is turned off.
• This luminaire is checked in full for conformity to the quality standards and safety requirements.
• The manufacturer / supplier is not responsible for any damage of properties and persons, caused by
the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a professional electrician
or your supplier for assistance.
• Ensure all items/ components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this luminaire,i.e.using silicon sealers or incorrect cabling, will invalidate
your warranty.
• When the protection glass is damaged, it should be replaced immediately. The luminaire
must not be used without the protection glass.
• Please check whether the connection of the power cord is safe and reliable before installation.
• Always ensure that the mains supply voltage is correct.
• Always replace the lamp with one of an identical rating.
• Ensure that you do not place the luminaire near any combustible materials and / or surfaces.
• Choking hazard: May contain small parts. Keep away from children.
• Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsofthisproduct
whilst it is connected to the electricity supply.
• Item may vary slightly from the picture on the carton.
• Coastal humidity may effect the longevity of the luminaire.
• Outdoor luminaires must be cleaned to prevent rust occurring.
• Use a copper grease on all screws or strings.
IMPORTANT SAFEGUARDS
* depth does not include mounting bracket or mounting distance from wall