Eurolux FS13 User manual

PRODUCT CODE
ENVIRONMENTAL PROTECTION
Waste electrical & Electronic equipment regulations requires that any of our products
showing this marking must not be disposed of with other household or commercial
waste. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate any such products from other waste types and recycle it
responsibly at your local facilities.
Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
www.eurolux.co.za
Please read instructions before commencing installation and retain for future reference.
Halogen Floodlight
FS13 / FS18
ILLUSTRATIONS
N
L
150W
500W
1000W
1500W
Fig. 1.
Min 200mm
Min90°
Fig. 2.
Fig. 4.
Max 4°
Max 4°
Fig. 3.
MIN 1m
Fig. 3.
Including: R7s
maximum 500W
±118mm
Including: R7s
maximum 500W
±78mm

• Fitting Material: Die cast aluminium.
• Lamp type:
FS13: Including: R7s maximum 150W ±78mm
FS18: Including: R7s maximum 500W ±118mm
• Voltage: 220V - 240V ~ 50Hz.
• Class : Class 1.
Protection against electric shock: Requires earth connection.
• IP Rating: 54.
Dust protected. Protected against water jets.
• Maximum Ambient temperature range: 20ºC - 40ºC.
• Commercial / domestic use.
• Suitable for outdoor use.
• Dimensions:
FS13: (H) 130mm X (W) 135mm X (D) 100mm
FS18: (H) 165mm X (W) 185mm X (D) 125mm
• Protection glass:
FS13: (H) 133mm X (W) 92mm X (D) 4mm
FS18: (H) 177mm X (W) 140mm X (D) 5mm
• Ensure that the mains voltage is turned / switched off before mounting the luminaire.
• This luminaire is only suitable for xed mounting.
• Do not mount the projector on the ceiling.
• This luminaire may not be used on a mast (pole).
• Fix the luminaire out of reach (2.5m) by 2 screws of minimum 6mm and maximum 7mm length.
• A minimum distance of 1 meter between the luminaire and the object or surface which has to be
lightened (Fig. 3).
• The lighting direction cannot be adjusted downward.
• For applications on a normal inammable surfaces, follow the instructions of (Fig.2).
• Use an approved power supply cable making sure that the gland is compatable to ensure that the
housing remains waterproof.
• Connect the green/yellow conductor of the connection supply cable with the
connection block, marked with the earthing symbol (Fig.1).
Changing the Lamp:
• When the lamp has to be changed, switch off the mains electrical supply before opening the lid.
• Now carefully x the lamp into the lamp holder, taking care not to touch with your bare hands.
• The lamp in this tting will burn through quickly if the tting is xed under an angle of more
than 4º (Fig.4).
SPECIFICATIONS
INSTALLING YOUR FLOODLIGHT
FS13 / FS18 - attachments:
If the external exible cable or cord of this luminaire is damaged, it should be exclusively replaced
by the manufacturer or his service agent or a similar qualied person in order to avoid a hazard.
To ensure that you get maximum longevity and maximum use out of your luminaire, please
observe the following safety instructions.
Electrical products can cause death, injury, or damage to property.
Installation of the luminaire must be carried out by a qualied electrician, in accordance with SANS
10142. On completion of installation, ensure that the Certicate of Compliance is updated.
• Before connecting this luminaire, ensure that voltage indicated on the rating label corresponds
with the mains voltage in your home.
• When changing the lamp, ensure that the power is turned off.
• This luminaire is checked in full for conformity to the quality standards and safety requirements.
• The manufacturer / supplier is not responsible for any damage of properties and persons,
caused by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a professional
electrician or your supplier for assistance.
• Ensure all items/ components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this luminaire, i.e.using silicon sealers or incorrect cabling, will invalidate your warranty.
• When the protection glass is damaged, it should be replaced immediately. The luminaire must
not be used without the protection glass.
IMPORTANT SAFEGUARDS
CLEANING
• Before cleaning always ensure the power supply is turned off.
• Do not immerse the luminaire in water.
• No abrasive products, solvents, detergent may be used to clean this luminaire.
• Ensure that the tting does not come in contact with corrosive chemicals, etc.
• Coastal areas ensure that the luminaire is cleaned fortnightly.
• Please check whether the connection of the power cord is safe and reliable before installation.
• Always ensure that the mains supply voltage is correct.
• Always replace the lamp with one of an identical rating.
• Ensure that you do not place the luminaire near any combustible materials and / or surfaces.
• Choking hazard: May contain small parts. Keep away from children.
• Do not insert your ngers or any part of your body into the electrical contact and sockets of this
product whilst it is connected to the electricity supply.
• Item may vary slightly from the picture on the carton.
• Costal humidity may effect the longevity of the luminaire.
• Outdoor luminaires must be cleaned to prevent rust occurring.
• Use a copper grease on all screws or strings.