Eurolux FS235 User manual

LED Floodlights
FS235: 1 x 20W Integrated LED 220 - 240V
FS236: 1 x 30W Integrated LED 220 - 240V
FS237: 1 x 50W Integrated LED 220 - 240V
FS238: 1 x 100W Integrated LED 220 - 240V
ILLUSTRATIONS
FS235 / FS236 / FS237 / FS238
PRODUCT CODE
Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
www.eurolux.co.za
Please read instructions before commencing installation and retain for future reference.
ENVIRONMENTAL PROTECTION
Waste electrical & Electronic equipment regulations requires that any of our products
showing this marking must not be disposed of with other household or commercial
waste. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate any such products from other waste
types and recycle it responsibly at your local facilities.

• Fitting Material: Die Cast Aluminium with Clear Tempered Glass Lens.
• Class: Class1. Requires earth connection.
• IP Rating: IP 65.
• Voltage: 220V - 240V ~ 50Hz.
• Commercial / Domestic use.
• Suitable for outdoor use when used correctly.
• Dimensions: FS235 (H)165mm x (W)185mm x (D)65mm
FS236 (H)205mm x (W)230mm x (D)80mm
FS237 (H)255mm x (W)280mm x (D)105mm
FS238 (H)295mm x (W)340mm x (D)115mm
• Lamp type: FS235 - 20W Integrated LED 220 - 240V
FS236 - 30W Integrated LED 220 - 240V
FS237 - 50W Integrated LED 220 - 240V
FS238 - 100W Integrated LED 220 - 240V
The light source of this luminaire is not replaceable. When the light source reaches its end of
life the whole luminaire should be replaced, or the light source should only be replaced by the
manufacturer.
• Weight: FS235 - 0.839kg
FS236 - 1.405kg
FS237 - 2.267kg
FS239 - 3.753kg
• Min Projection Area: FS235 - 0.01264m2
FS236 - 0.02175m2
FS237 - 0.03548m2
SPECIFICATIONS
CLEANING
• Before cleaning always ensure the power supply is turned off.
• Do not immerse the luminaire in water.
• No abrasive products, solvents, detergent may be used to clean this luminaire.
• Ensure that the luminaire does not come in contact with corrosive chemicals, etc.
• Coastal areas ensure that the luminaire is cleaned fortnightly.
FS235 / FS236 / FS237 / FS238 - attachments:
If the external exible cable or cord of this luminaire is damaged, it should be exclusively replaced
by the manufacturer or his service agent or a similar qualied person in order to avoid a hazard.
To ensure that you get maximum longevity and maximum use out of your luminaire, please
observe the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
must be carried out by a qualied electrician, in accordance with SANS 10142. On completion
of installation, ensure that the Certicate of Compliance is updated.
• Before connecting this luminaire, ensure that voltage indicated on the rating label corresponds
with the mains voltage in your home.
• This luminaire is checked in full for conformity to the quality standards and safety requirements.
• The manufacturer / supplier is not responsible for any damage of properties and persons, caused
by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a professional
IMPORTANT SAFEGUARDS
electrician or your supplier for assistance.
• Ensure all items / components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this luminaire, i.e. using silicon sealers or incorrect cabling, will invalidate
your warranty.
• When the protection glass is damaged, it should be replaced immediately. The luminaire must
not be used without the protection glass.
• Please check whether the connection of the power cord is safe and reliable before installation.
• Always ensure that the mains supply voltage is correct.
• Ensure that you do not place the luminaire near any combustible materials and / or surfaces.
• Choking hazard: May contain small parts. Keep away from children.
• Do not insert your ngers or any part of your body into the electrical contact and sockets of this
product whilst it is connected to the electricity supply.
• Item may vary slightly from the picture on the carton.
• Coastal humidity may effect the longevity of the luminaire.
• Outdoor luminaires must be cleaned to prevent rust occurring.
• Use a copper grease on all screws or strings.
INSTALLATION
• Ensure that the mains voltage is turned / switched off before mounting the luminaire.
• This luminaire is only suitable for xed mounting.
• Do not mount the luminaire on the ceiling.
• Refer to pictures for mounting of luminaire insure all connections are done with IP rated boxes.