Russell Hobbs RHPDF1211 User manual

RHPDF1211 Revision 1.5
Operating Manual
RHPDF1211
12” DESK
FAN

RHPDF1211 Revision 1.5
GUARANTEE
At Russell Hobbs, we take all our customer feedback seriously.
Feel free to contact our Product Care Team, on 0345 209 7461 who will be more
than happy to assist you.
This product is guaranteed for 12 months from the date of the original purchase. If any
defect arises due to faulty materials or workmanship, the faulty product must be
returned to the place of purchase.
Refund or replacement is at the discretion of the retailer.
The following conditions apply:
•The product must be returned to the retailer with the original proof of purchase.
•The product must be installed and used in accordance with the instructions
contained in this instruction guide and any other instructions for use which are
supplied.
•It must be used for domestic purposes only and for its intended use.
•This guarantee does not cover wear and tear, damage, misuse or consumable
parts.
•This does not affect your statutory rights.
RUSSELL HOBBS CONTACT DETAILS
Website: https://mda.russellhobbs.com
Telephone: [phone]
Address: Product Care, Green Bank Business Park,
Hindley Green, Wigan, WN2 4AY
Note your serial number below for future reference.
Image for
illustration
purposes only

RHPDF1211 Revision 1.5
IMPORTANT SAFETY INSTRUCTIONS
•It is hazardous for anyone other than a competent person to carry out any
service or repair operation that involves the removal of a cover which gives
protection against exposure to electrical parts.
•Do not use with a damaged cord or plug. If the supply cord is damaged, it must
be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
•This product is intended for household use only.
•Do not use outdoors.
•This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children should not play with the appliance. Cleaning and user
maintenance should not be made by children without supervision.
•Do not operate this appliance for anything other than its intended use.
•Do not immerse whole unit in water or other liquids for cleaning.
•Unplug from outlet when not in use. Do not leave unattended while plugged in.
•Do not use if it has been dropped, damaged, left outdoors or dropped into
water.
•Keep the appliance away from water; do not allow it to get wet. If unit is wet, do
not plug unit into wall socket or turn unit on.
•Do not handle the appliance with wet hands.
•Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord
around sharp corners or edges, or expose cord to heated surfaces. Do not
unplug by pulling on cord.
•To protect against electrical shock do not immerse cord, plug, or appliance in
water or other liquid.
•Unplug from the mains outlet when not in use, before putting on and taking off
parts, and before cleaning.
•Only use the unit when fully assembled.
•Never place your fingers or other objects into any part of the appliance. Be
aware that loose clothing or hair may become trapped in the appliance if
improperly used.
•Before use, ensure that all of the air vents of the appliance are clear and there
is no restriction of air flow.
•Caution: Appliance may disturb ashes in an open fire. Always avoid directing
the appliance toward naked flames.

RHPDF1211 Revision 1.5
PARTS
ASSEMBLY
SETTINGS
OSCILLATION
Press the switch on the rear of the fan to engage the oscillation feature.
1. Front Grille
2. Fan Blade Securing Cap
3. Fan Blade
4. Rear Grille Securing Nut
5. Rear Grille
6. Fan Blade Fixing Point
7. Oscillation Switch
8. Fan Base Plate
9. Grille Securing Screw & Nut
10.Stand Pole
11.Motor Housing
1. Push the Stand Pole [10] through the
Base Plate [8] and it will clip in secure by
twisting the lock.
2. Place Rear Grille [5] on Motor Housing
[11] aligning with rear posts, and secure
with Nut [4]
3. Attach Fan Blade [3] onto Fixing Point [6]
and secure with Cap [2]
4. Clip Front Grille [1] onto Rear Grille [5]
using attached clips, and screw in
Securing Screw [9]. Screw Hole on the
Front Grille should be at the top.
6
7
8
9
Low
Med
High
Off
10
11

RHPDF1211 Revision 1.5
PROBLEM SOLVING
The fan doesn’t
switch on
•Check the fan is plugged in
•Check the socket is switched on
•Check another appliance in the socket
•Unplug and check for any obvious signs of damage to cord or
plug
•If recently used, allow to cool for 1 hour then try again
The fan is
rattling
•Check the grille is secured properly
•Check all screws are securely fastened
•Check there is nothing in contact with the fan
Fan will not
oscillate
•Check the oscillation switch is pressed down
•Check that nothing is interfering with the fan preventing
oscillation
Fan is making a
grinding sound
•Immediately switch off and contact Customer Services
The air is dusty
•Ensure fan is unplugged and set to 0
•Carefully remove grille
•Carefully remove blades from fan
•Using mild soapy water and a sponge, gently rinse the blades
•Allow to dry naturally for 24 hours then refit the blades
If you are still experiencing difficulties with the appliance please
contact us BEFORE returning the appliance to the retailer it was
purchased from:
Website: https://mda.russellhobbs.com
Telephone: [phone]
Address: Product Care, G2S, Green Bank Business Park,
Hindley Green, Wigan, WN2 4AY

RHPDF1211 Revision 1.5
IMPORTANT!
KEEP BLADES CLEAN
Wash the blades with cold water at least once every 3 months.
The blades may require more frequent washing if in a dusty environment.
Ensure that the fan is unplugged before removing the guard.
3
MONTHS
This product is guaranteed for 12 months from the date of the
original purchase. If any defect arises due to faulty materials or
workmanship, the faulty product must be returned to the place of
purchase.

RHPDF1211 Revision 1.5
NOTES
https://mda.russellhobbs.com
Product Care, G2S Ltd, Green Bank Business Park,
Swan Lane, Hindley Green, Wigan, WN2 4AY

RHPDF1211 Revision 1.5
The ‘wheelie bin’ symbol is known as the 'Crossed-out wheelie bin Symbol'. When this symbol is marked on a
product/batteries, it means that the product/batteries should not be disposed of with your general household
waste. Only discard electrical/electronic/battery items in separate collection schemes, which cater for the
recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these
schemes and for the protection of the environment. For your nearest disposal facility, visit
www.recycle-more.co.uk or ask in store for details.
SEDEX – Connecting businesses and their global suppliers to share ethical data and enabling improvement in
ethical performance. Visit www.sedex.org.uk for further information.
We reserve the right, due to possible changes to design, to alter the instruction manual without prior notice.
Russell Hobbs is a registered trademark used under license from
Spectrum Brands (UK) Ltd. Made under license by G2S Limited, Wigan,
WN2 4AY
Russell Hobbs Support: call 0345 209 7461 or visit
https://mda.russellhobbs.com
Imported by Tesco Stores Ltd,
Tesco House, Shire Park, Kestrel Way, Welwyn Garden City, AL7 1GA