Installation and rst use
Evacuaid is mounted strategically according to your needs. It is
important to take an overview considering who is doing what
in case of an emergency. The emergency bracelet should be
mounted according to this analysis. Common places are next to
the re panel, places where it is complicated to evacuate long
escape routes, where it is dark, or xed in the belt as a personal
safety equipment.
Included you will nd a bracket that may be mounted onto walls,
as well as adhesive markers. For those in need of more equipment:
cabinets, sealing and other ways of transporting the emergency
bracelet are oered.
Evacuaid PRO
Emergency Bracelet Manual www.evacuaid.com
Ensure supply of energy
Evacuaid is maintenance free for 6 years if remained unused.
When used, ensure not to exceed use beyond the battery matrix
below. This may lead to the product not working in an emergency
and may expose human lives to unnecessary danger.
• Evacuaid may not be painted or covered in any way. This will
have unwanted eect on the usage.
• Warning: Loss of hearing! The alarm signal is powerful. Do
not test Evacuaid close to your ear.
• Warning: Battery explosion! Do not recharge, short circuit,
disassemble or dispose the batteries in the oven.
• Do not let children play with Evacuaid or the packaging.
• Every person who might make use of Evacuaid in an
emergency situation should be shown how it works and the
signals it produces.
Follow the instructions
When using the device it is of the utmost importance that the
operating instructions are known and followed closely. The
appliance is only suitable for the use described. Read this manual.
Follow all instructions and take care of the manual.
Area of application/Security Specications
Evacuaid is very robust and designed to withstand the potential
external strain in an emergency. It is water- and dustproof,
withstands high temperatures and being dropped to the ground.
FOR YOUR OWN AND OTHERS’SAFETY:
Use
Evacuaid PRO Emergency Bracelet is a tool for safer and
faster evacuation. It is also a tool for sta responsible
for other people’s safety in an emergency. The bracelet
is activated automatically when attached to your wrist.
Immediately you have a ashlight to help you see and nd
your way out. If the user becomes unconscious Evacuaid
will automatically activate the emergency mode, using
powerful sound and light signals, making it easier for
rescue crews to locate the person. Emergency mode may
also be activated manually to attract attention
from rescue crew or others while still conscious.
NB! Strap and activation
Strap of bracelet must be tight to activate. The strap is designed to t all people, regardless of size.
Some may experience the strap to be somewhat tight. For small children, the bracelet should be xed
further up the arm or around the back of the hand. It is essential that the strap is tight for the bracelet
to be activated. The bracelet sends out a distinct sound when both activated and deactivated. When
the bracelet is activated, the ashlight lights up.
Evacuaid modes
Get to know the bracelet through testing
Every individual bracelet is tested at the production site.This is a part
of our quality control. The Evacuaid PRO Emergency Bracelet should
still be tested in connection with mounting.
1) Put the bracelet onto your wrist.
Ensure that Evacuation/Working Mode activates automatically.
2) Hold your hand still for 25 seconds.
Ensure that Automatic Emergency Mode activates automatically.
3) Move your hand.
Ensure that the bracelet automatically resets to Evacuation Mode.
4) Press the Manual Emergency Mode button.
Ensure that Manual Emergency Mode is activated. Make sure the bracelet
remains in Manual Emergency Mode even though you move your arm.
5) Take the bracelet o.
Ensure the bracelet is automatically deactivated and resets to
Standby Mode. Automatic deactivation ensures that false alarms
will never be set o.
To turn the manual emergency mode o, push the manual alarm button.
Evacuaid - Mode Features:
Standby Mode The bracelet is turned o, no signals are given
Bracelet is activated and ready for use. Flashlight operative. LED
lights in front of the bracelet gives good visibility 15 meters
ahead.
Evacuation Mode
Automatic Emergency Mode Motion sensor sets o powerful sound and light signals. After
25 seconds with lack of movement the bracelet rst gives a
warning, then a more more powerful combination of sound
and light up to 90 db at 3 meters distance. If the bearer moves
his/her hand in Automatic Emergency Mode the bracelet will be
reset to Evacuation Mode.
Manual Emergency Mode The bearer has set o the powerful sound and light signals
manually. Now the bearer may move his/her hand and still
benet from the sound and lights to call for attention.
Powerful LED torches to show the
way out and locate others
Manual alarm button
Evacuaid is attached to the
wrist, leaving both hands free
to operate
Automatic activation mechanism
for stress-situations – simply
strap it on to activate
No false alarm – Evacuaid is
only activated when attached
to the wrist
Compact and lightweight,
83 x 69 x 32 mm [H x W xD]
Red LED alarm lights for
optimal smoke penetration
Powerful 90db alarm
at 3 m distance
Robust design / IP67 watertight
No installation or maintenance cost
Long lasting AA lithium batteries
Highly sensitive motion sensor for
automatic alarm
The frequencies 900, 6000 and 3000 Hz
makest the alarm distinctive, far
reaching and easy to locate
Tests: EMC, EN 61000-6-2, EN 61000-6-3
FCC CFR 47 Part 15 : 2008
