Everbilt 9236046 User manual

THANK YOU
Thank you for choosing Everbilt!
USE AND CARE GUIDE
PUSH TO OPEN BALL BEARING DRAWER SLIDES
Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-800-305-1726
HOMEDEPOT.COM
Retain this manual for future use.
Item #
Model #
1002 782 611
9236046 (20 in.)
9236048 (22 in.)
1002 803 079
924 394 600

2
Table of Contents
Table of Contents ...................................2
Warranty ..........................................2
Pre-Installation.....................................2
Planning Installation ...............................2
Tools Required ....................................2
Package Contents .................................3
Installation Options .................................3
Dimensions ........................................4
Installation ........................................5
Warranty
Subject to the terms of this warranty, the Manufacturer warrants to the original consumer purchaser that the product will be free from
defects in material and workmanship. If the product does not comply with this warranty, the Manufacturer will repair or replace the product
or, at the Manufacturer’s option, refund the purchase price. Repair, replacement, or refund of the original purchase price is your sole remedy
under this or any other warranty on the product, whether expressed or implied.
For additional details and questions, please contact Everbilt Customer Service at 1-800-305-1726.
Pre-Installation
PLANNING INSTALLATION
Please read and understand this manual before installing this product.
Ensure all parts listed in the Package Contents section are included and that you have the listed Tools and Materials Required on hand. If
any part is missing or damaged, contact customer service.
TOOLS REQUIRED
Pencil Level Measuring Tape Phillips
screwdriver

3 HOMEDEPOT.COM
Please contact 1-800-305-1726 for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
A B
C
Part Description Quantity
A Bracket 2
B Drawer Slide 2
C #6x1/2 in. Screw 8
Installation Options
These slides are intended for frameless cabinets. For face frame cabinets, the socket set is required.
Frameless Face Frame

4
Dimensions
Please review these diagrams and measure and mark your installation location before you begin the installation procedures.
ƑTo avoid binding, the drawer or pull-out-shelf must be 1/2 in. (12.7 mm) narrower than the cabinet opening on each side.
ƑThe top and bottom of the drawer or pull-out-shelf bottom should have a 1/8 in. (3.2 mm) minimum clearance from the cabinet
opening.
ƑThese slides have a capacity of 77 lb (35 kg), per pair.
ƑThese slides are available in lengths of 20 in. (500 mm) and 22 in. (550 mm).
37 96
Minimum Carcase depth
128 64
4
37 344
Nominal Length
mm
46
12.7
23
23
ø 4 x 12
≥ 1 6
1-13/16"
(46 mm)
1/8" Min.
(3.2 mm)
1-1/4"
(31.8 mm)
1/2"
(12.7 mm)

5 HOMEDEPOT.COM
Please contact 1-800-305-1726 for further assistance.
Installation
1 Separating the slides
Press the release lever (1) and remove the drawer slides (B) from
each bracket (A).
A
B
1
2 Marking the slide locations on the
drawer
Mark 1-1/4 in. (32 mm) from the bottom of the drawer. Align the
top of the drawer slides (B) with the marks on each side of the
drawer.
1-1/4"
(31.8mm)
B
3 Installing the drawer slides
Ensure each drawer slide (B) is level and then secure to the sides
of the drawer with screws (C).
C (x3)
B
4 Positioning the drawer
Determine the drawer position. Mark the bottom of the drawer
front. Place the brackets (A) onto the drawer slides (B) and
measure “X”.
X
A
B

6
Installation (continued)
5 Marking the bracket positions
Mark “X” from the bottom of the mark. Align the top of the
bracket (A) with the mark, 1/16 in. from the front of the cabinet.
6 Installing the brackets into the cabinet and drawers
Make sure each bracket (A) is level and secure inside the cabinet with screws (C). Insert the drawer into the cabinet and close.
The release lever (1) will lock.
1/16"
(1.6 mm)
C
1
A
X
A